Consultancy Services For Third Party Inspection, Supervision And Submission of Reports etc Complete For The Work Of Uchagaon And Santibastawad Tank Filling Scheme.

Conducting Safe Bearing Capacity SBC test as per the direction of Engineer in charge

Conducting Electrical Resistivity Test as per the direction of Engineer in charge

Conducting Consistency Test for cement as per the direction of Engineer in charge

Conducting Finess Test of cement as per the direction of Engineer in charge

Conducting Soundness Test By Le chatelliers Method as per the direction of Engineer in charge

Conducting Setting Time Test For set of three number as per the direction of Engineer in charge 3 sets per sample

Conducting Compression test for cement as per the direction of Engineer in charge

Conducting Sieve analysis fine aggregates as per the direction of Engineer in charge

Conducting Specific gravity Bulk density Bulking and Moisture Content Water Absorption as per the direction of Engineer in charge

Conducting Silt content Test as per the direction of Engineer in charge

Conducting Finess Modulus test for fine Aggregates as per the direction of Engineer in charge

Conducting Particles smaller than 75 microns Fine Aggregate test as per the direction of Engineer in charge

Conducting Sieve analysis test for coarse aggregates as per the direction of Engineer in charge

Conducting Specific gravity and Bulk density test for coarse aggregate as per the direction of Engineer in charge

Conducting Impact value test for coarse aggregates as per the direction of Engineer in charge

Conducting Abrasion value test for coarse aggregates as per the direction of Engineer in charge

Crushing value test for coarse aggregates as per the direction of Engineer in charge

Conducting 10 percentage fines value test for coarse aggregates as per the direction of Engineer in charge

Conducting Particles smaller than 75 microns test for coarse Aggregate as per the direction of Engineer in charge

Conducting Striping value test for coarse aggregates as per the direction of Engineer in charge

Conducting Compressive strength test for concrete cubes as per the direction of Engineer in charge set of 3 Nos

Conducting ultra sonic pulse velocity test at site as per the direction of Engineer in charge

Conducting Non Destructive Rebound Hammer test as per the direction of Engineer in charge Per Element

Concrete core extraction including profometer test as per the direction of Engineer in charge

Conducting compression test on cement concrete cylinder with caping as per the direction of Engineer in charge

Conducting concrete mix design for concrete as per the direction of Engineer in charge

Conducting Reinforcement steel physical properties test more than 20mm as per the direction of Engineer in charge

Conducting Water Sample Test for Construction work as per the direction of Engineer in charge Per Source

Conveyance Allowance charges one vehicle 180 days per day 50km x 16 as per the direction of Engineer in charge( Per kM)

Engaging Photographer as per the direction of Engineer in charge wages /day

Printing of Photos MR as per the direction of Engineer in charge per photo

Engaging Graduate Engineer Electrical 1 No as per the direction of Engineer in charge Wages Per Month

Engaging Graduate Engineer 1 nos as per the direction of Engineer in charge Wages Per Month

Engaging Helper Laboratory 1 No as per the direction of Engineer in charge Per Day

Testing and Commissioning of Power Transformers Inspection of wires and ferrules a Inspection of wiring of protective devices cooling fans oil flow pumps OLTC RTCC bushing etc for 33 KV as per the direction of Engineer in charge Per Transformer

Transformers Oil Test Main Tank Top Bottom OLTC.a-Break down Voltage BDV.b-Dielectric Dissipation factor Tan delta.c-Neutralization number Acidity.d-Flash Point.e-Gas Analysis.f-Kinematic Viscocity as per the direction of Engineer in charge

Testing and Commissioning of Power Transformers Inspection of wires andferrules with 14 tests (for more details refer bid document) Per Tranformer

Switchgear-11 kV,Testing of relays CTs PTs and Breaker for operation For additional 11kV panel indoor type (for more details refer bid document)

Condtion Monitoring Online three tests on Motors (for more details refer bid document)

Condtion Monitoring offline seven tests on Motors (for more details refer bid document)

Condtion Monitoring test on Building LA.a-Earth Resistance.b-Continuity Testing.c-Physical inspection as per the direction of Engineer in charge

Condtion Monitoring test on Earth Pit.a Earth Resistance as per the direction of Engineer in charge

Condtion Monitoring six tests on Earth rubber mat (for more details refer bid document)

Condtion Monitoring test on Bus bar.a-Insuation resistance IR as per the direction of Engineer in charge

Condtion Monitoring test on EOT crane.a- Insuation resistance IR b-Functional checks for control panel as per the direction of Engineer in charge

Relay Testing 33 KV and 11 KV ( Total r tests, for more details refer bid document)

Condtion Monitoring test on Capacitors.a-Insulation Resistance IR Test.b-Functional Check.c-Operational Check as per the direction of Engineer in charge

Condtion Monitoring test on Soft Starter a.All realy secondary injection and timing Check b.All meters caliberation Tests as per the direction of Engineer in charge

Condition Monitoring test on LT MCC a Insulation resistance IR b All relay secondary injection and timing Check (for more details refer bid document)

Conducting Test for Hydraulic Test for MS pipes Witness as per the direction of Engineer in charge (Per Km)

Conducting Test for Hydraulic Test for HDPE pipes Witness as per the direction of Engineer in charge Per Km

Epoxy Coating Thickness Test for MS Pipe as per the direction of Engineer in charge

Conducting Test for Non Destructive Test 1 Rebound Hammer as per the direction of Engineer in charge

Conducting Ultra sonic testing on welded joints at site including all charges as per the direction of Engineer in charge

Inspection for testing of electrical mechanical equipments as per approved QAP Electromechanical Expert inclusive of TA DA and incidental charges etc

Inspection for testing of electrical mechanical equipments as per approved QAP Electromechanical Expert inclusive of TA DA and incidental charges etc..

Sieve analysis test for soil as per the direction of Engineer in charge

Liquid and plastic limits test as per the direction of Engineer in charge

Standard Compaction OMC and MDD for soil as per the direction of Engineer in charge

Specific gravity test for soil as per the direction of Engineer in charge

Soaked CBR test for soil as per the direction of Engineer in charge

Field density test Core cutter for soil as per the direction of Engineer in charge

Difference free swell index test for soil as per the direction of Engineer in charge

Hydrometer test for soil as per the direction of Engineer in charge

Permiability test for soil as per the direction of Engineer in charge

Shrinkage Limit test for soil as per the direction of Engineer in charge

Swelling Pressure Test for soil as per the direction of Engineer in charge

Triaxial shear test for soil as per the direction of Engineer in charge

Consolidation test for soil as per the direction of Engineer in charge

Stone works Water Aborption size test strength test as per the direction of Engineer in charge

Compression test paver blocks as per the direction of Engineer in charge

Conveyance Allowance charges 1 vehicles 365 days as per the direction of Engineer in charge Per Km

Photographer as per the direction of Engineer in charge wages day

Post Graduate Engineer Geotech as per the direction of Engineer in charge Wages Month