SPL REPAIR OF SECURITY FENCING AT 75 I INF BDE COY, PROVN OF EXTERNAL ELECTRIC SERVICES TO TECHNICAL SHELTER AND ADDN ALTN TO PERIMETER WALL AT 5075 COY AT MIL STN BHUJ UNDER GE ARMY BHUJ

Amount

Excavation in post holes (or similar holes ) each n.exc 0.5 cum, getting out in hard dense soil including returning, filling in and ramming earth or broken rubble mixed with earth aroung, in layers not exceeding 25cm, watering making good surface complete all as specified and directed.

M&L removal of excavated soil n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point

M & L for PCC 1:4:8 type D-2 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S & F of mild steel works posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 or E-165 complete all as specified and directed.

M & L for preparing new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S&F PVC coated chain link fencing of mesh size 75x75mm, diameter of GI wire 3mm thick complete all as specified and directed.

M & L for PCC 1:2:4 type B-2 40mm graded stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts incl necessary formwork complete all as specified and directed.

S & F of 10 mm dia MS screw bolts (machine made) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt & n.exc 5 cm long complete all as specified & as directed.

Supply only Mild Steel round Bar 10 mm dia to be fixed as line wires in Chain Link Fencing complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description not exceeding 10cm in width or grith and applying two coats of aluminium paint over one coat of red oxide primer complete all as specified and directed.

S&F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Dismantling fencing wire mesh, any type

Dismantling posts or struts (wood, steel or R.C.C.) any section,Including taking out embedded portion and making good disturbed ground

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Demolition of stone/ brick/Block work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.

M&L for Pre-cast cement concrete block 1:3:6 mix as in masonry with solid blocks, exc. 10 cm in width and setting in cement Mortar 1:6 complete all as specified and as directed.

M&L Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work complete all as specified

Taking down cement plaster, any description, on block/ brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed

M&L for 15mm thick rendering/ plastering in CM 1:4 on brick/block/stone masonary surfaces or other than fair face of brick/block/stone masonary work or on one side of lathing finished even and smooth complete all as specified and as directed.

S&F mild steel rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, fencing post etc; Confirming to Fe 410 -W (Gde E- 250) complete all as specified and directed.

Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces all as directed by Engr in charge.

M&L for broken glass coping on top of walls using cement mortar 1:3 complete all as specified and as directed.

M&L for mild steel TMT bars 5 mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth in any typr of soil for laying of cable/ GI pipe and getting out complete all as specified and directed.

Returning, filling in including spreading levelling watering well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing surplus soil to a distance outside MD land and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for dry clean river sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. Note :- Only compacted thickness of sand will be measured and paid separately.

Supplying and laying un-reinforced precast concrete cable cover, class HV Type I, flat, size 300 mm x 180 mm x 40 mm. laid in trenches complete all as specified and directed.

M&L for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts, (Earthed) grade cross sectional area 95 sq. mm 3 core in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc and making good the disturbed surfaces complete all as specified and as directed

Material and labour for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sq mm complete all as specified and as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of 11 KV 200 Amps triple pole gang operated air break switch having 12 Nos porcelain insulator with earthing switch rotating type for horizontal or vertical operation mechanically operated 3 rows type mounted on FRP insulators (including insulators) and steel frame with operating mechanism consisting of operating rod of 25mm bore medium grade GI pipe of suitable length to operated from ground level including locking arrengment with pad lock with three Nos of keys including 11 KV swing out expulsion fuses (drop out type) of 10 Amps complete all as specified and as directed.

Supply,install, test and commisioning of pole mounted 63 KVA, 11/0.433 KV, 3 Phase, 50 HZ, Dyn 11, Outdoor ONAN type, copper wound, oil immersed naturally cooled, step down transformer conforming to BEE standards with off circuit tap changing arrangement of HV side in steps of +5% to -5% in step of 2.5% each and having cable end box on HV & LV side, the cable box at LV/HV side should be suitable to house for proper size and capacity of out going aluminium cable and to be provided with all standard accessories and first filling of filtred dehydrated transformer oil of IS-335 complete as per specification and conforming to IS:1180:2014, Energy efficiency level-2 as per IS-1180. The transformer shall be following standard accessories complete all as directed :- (a) Namer rating & diagram plate - 01 No (b) Off circuit tap changing switch - 01 No (c) Earthing terminal - 02 Nos (d) Lifting lugs - 02 Nos (e) Oil level indicator (flush tube) - 01 No (f) Oil drain valve with plug - 01 No (g) Conservator with oil filling hole - 01 No (h) Air release plug - 01 No (i) Silicagel breather - 01 No

Supplying, install and errect in true vertical position pressed concrete poles of 11.00 mtr long 152mm x 152mm at top and 152mm x 260mm at bottom,class 9, painting and marking alternate white and black strip 30cm height, painting pole number, letters/figures by black paint complete all as specified and directed.

Supply and erection of Cross arms, bracings, supports, clamps and back plates,equal channel, anchor for stay wire,stay strand fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed all as specfied and directed

Supply and fix All aluminium conductor having high strength to weight ratio for jumper of 2/4 pole structure complete all as specified

Supply and conncetion of new Pin type, porcelain, vitreous,brown insulator on pole or any structure including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 voltsgrade all as specfied and directed by Enginner Charge

Supply and conncetion Disc type insulator, porcelain, vitreous145mm high and 255mm dia ball and socket type, white, brown or green Two-in-series' assembly for tension with tension clamps for conductors, working pressure 11000 volts grade including connection of existing OH HT line all as specfied and directed by Enginner Charge

M&L for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate in foundation, filling and mass concrete for poles/struts etc including necessary formwork as required complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregates as in copings, kneelers, apex stones, bed plates, kerbs etc., water troughs and the like including weathering, slightly rounded for chamfered angles and throating including necessary form work complete all as specified and as directed.

M&L for loose filling with graded stone aggregates (granite) 50 mm spread thickness 150 mm for outdoor transformer complete all as specified and directed

Supply, install, testing and commissioning lightening arrestor (expulsion type) outdoor nominal discharge current 65 KA, 11 KV including clamps, nuts, bolts and washers and connecting to earth with 32x6 mm GI strip complete all as specified and as directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

M/S S. SINGH TRADERS (BID ID -3459844)