Adidhura (Retro) PUMPING W/S SCHEME

Amount

Rates for Aididhura Raighadi Pumping Water Supply Scheme

Supply and Carting, of following sizes of MSERW YST210 grade plain ended pipes from store to site of work, lowering them into trenches, laying true to alignment & gradient, laying & Jointing of Pipe by electric welding, making horizontal & vertical bends of any degree as per site conditions including cutting of pipes for making up lengths as required for completion of works & also including cost of welding materials (Advani make welding rods), all other materials,labours & T&P etc. required for proper completion of work. 1) 80 mm (7.1 mm thick)

2) 65 mm (5.20mm thick)

Supply, Carting , laying , jointing ,fixing ,and testing of G.I. screwed pipes with specials and fittings in trenches under ground, outside the building including cutting, threading etc. complete G.I. Medium quality 1) 20mm dia

2) 25mm dia

3) 32mm dia

4) 40mm dia

5) 50mm dia

6) 65mm dia

7) 150mm dia

Excavation of pipeline trench in following strata lift upto 1.5m lead upto 30m. Including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto adistance of 60m from trenches including supply of labour, T&P etc complete. Soil mixed with Boulder and bazari

Finishing with Food grade Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’ specifications i/c appropriate priming coat, preparation of surface, etc. complete. On steel work External Dia of Pipe in 132 mm dia

Supply and fixing of the following fittings including cartage of materials, labours, T&P. etc. complete. Wheel/Gate valves (Class-I)as per I S 778/1997. 1) 25mm dia

2) 32 mm dia

3) 40mm dia

4) 50 mm dia

5) 65mm dia

House Hold Connection Making ferrule connection in the existing main of G.I or any type of pressure mains with saddle piece, survice connection, fittings and fixing of G.M ferrule including tapping the main, including the cost of all materials like GI Specials, gun metal ball valve and GM ferrule etc. Ferrule connection (Labour cost only including index) 1) House Hold Connection @6mtr

2) House Hold Connection @12mtr

3) House Hold Connection @18mtr

4) House Hold Connection @24mtr

R.R. stone masonry in cement & local sand (1:6) in foundation and Plinth . foundation & plinth including supply of material labour T & P etc. for proper completion of work..

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size).

Centring and shuttering including strutting,ropping etc. and removal of form for thrust block.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8(1 Cement : 4 coarse sand :8 graded stone aggregate 40 mm nominal size).

Supply and fixing of the folowing fittings including cartage of materials, labour, T&P etc complete C.I. Sluice Valves Non Rising (P.N 1.6) 1) 80 mm dia

C.I Reflux valves non Rising 1) 80 mm dia

2) 65 mm dia

Supply of all materials, labours, T&P. etc.and construct wheel valve chamber(60x60X60) as per type design complete.

Supply of all materials, labours, T&P. etc.and construct wheel valve chamber(45x45X45) as per type design complete.

Supply of all materials, labours, T&P. etc.and construct B.P.T. as per type design complete.

Approach road and other misc work.

Provision for Iron Gate with two pillars complete. 2.4 m wide gate

Provision of Boundary Wall

Construction of Pump House

Supply of all materials, labours, T&P etc and construct pump house room of 3.5mX 3.0m internal size including construction of plateform for pumps & moters, supporting pillers as per drawing

Supply of all materials, labours, T&P etc and construct pump house room of 7.0mX 6.0mX4.00m internal size including construction of plateform for pumps & moters, supporting pillers as per drawing

Cetnrifugal Pumping Plants MPS-1

1-Supply of High head multistage horizontal Centrifugal pump capable to deliver 450LPM clear water at 570Mts. Head with bronze impeller. 2-Supply of 70H.P. Induction motor T.E.F.C 2900 1 2 RPM operating at 415± 10% volts 3 phase 50C/S A.C. supply for above pump. 3-Supply of M.S. fabricated base plate for above pump and motor set with coupling and coupling guard.

Fully automatic Auto Transformer starter suitable 5 for above pumping plant with Air break auto Transformer

Power wiring and earthing material 35sq.mm 3 core copper cable- 80 Mt. 120sq.mm 3.5core Al. armoured cable- 50 Mt. Jointing material lugs, tape, etc- 1 Set, Complete double loop earthing of all electrical equipments including supply of G.I. earth strip, G.I. Earth plate & G.I. Earth box cover including supply of charcoal and salt etc. complete material as per I.E. Rule- 1 Set

Main piping and Valves 1.Suction side 100mm dia CIDF sluice valve with Head wheel.- 2 Nos., M.S.D.F. taper (100mm x pump sue size) - 2NOS.,100mm dia M.S.D.F. 90 digri bend - 2Nos.,100mm dia M.S. pipe 3 Mt. long.- 2Nos, 100mm dia stainer. - 2 Nos, 2. Delivery side M.S.D.F. enlarger (80mmxpump del size) -2Nos. 80mm dia class 600ASA cast steel swing check valve - 2Nos.80mm dia class 600 ASA Gate valve . - 2Nos 3. Common header & Byepass arrangement -80mm dia 1.5Mts. Long M.S.D.F pipe- INo. 80mm dia M.S.D.F pipe l.0 mt. long - 2Nos 80mm dia M.S.D.F pipe2.0mt. long -1 No. 80x80x80mm dia M.S.D.F. Tee - 2Nos. 80mm dia blind flange - 1No. 80mm dia M.S.D.F.90° bend - 2Nos.Nut bolt & rubber packing -1 Set, 80mm dia cast steel gate valve 600ASA -2 Nos.80mm dia cast steel swing check valve600ASA -1 No. 80x80x80M.S.A.F. Tee. 2Nos

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Tools.

Rubber Resistance Sheet IMt.x 2Mt x.025Mt.

315Amp TPN Switch fuse unit.

Servo Control Voltage Stabilizer 160KVA suitable for regulating incoming voltage 300 to 480Volt, outgoing voltage 415Volt with 315Amp. changeover switch and 50sq.mm 3½ Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plant with 2 coat of enamel paint.

1 Month trial running and 5 months maintenance including watch & ward.

Testing of 2Nos.pump set at manufacturer works.

Carting of 2 sets of pumping plant with all material i.e. pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site of work road site then shifting by head load upto pump house in hilly zig-zag path.

Cetnrifugal Pumping Plants IPS-1 to Top CWR

1-Supply of High head multistage horizontal Centrifugal pump capable to deliver 450LPM clear water at 400Mts. Head with bronze impeller.2-Supply of 70H.P. Induction motor T.E.F.C 2900 1 2 RPM operating at 415± 10% volts 3 phase 50C/S A.C. supply for above pump. 3-Supply of M.S. fabricated base plate for above pump and motor set with coupling and coupling guard.

Fully automatic Auto Transformer starter suitable 5 for above pumping plant with Air break auto Transformer

Power wiring and earthing material 35sq.mm 3 core copper cable- 80 Mt. 120sq.mm 3.5core Al. armoured cable- 50 Mt. Jointing material lugs, tape, etc- 1 Set, Complete double loop earthing of all electrical equipments including supply of G.I. earth strip, G.I. Earth plate & G.I. Earth box cover including supply of charcoal and salt etc. complete material as per I.E. Rule- 1 Set

Main piping and Valves 1.Suction side 100mm dia CIDF sluice valve with Head wheel.- 2 Nos., M.S.D.F. taper (100mm x pump sue size) - 2NOS.,100mm dia M.S.D.F. 90 digri bend - 2Nos.,100mm dia M.S. pipe 3 Mt. long.- 2Nos, 100mm dia stainer. - 2 Nos, 2. Delivery side M.S.D.F. enlarger (80mmxpump del size) -2Nos. 80mm dia class 600ASA cast steel swing check valve - 2Nos.80mm dia class 600 ASA Gate valve . - 2Nos 3. Common header & Byepass arrangement -80mm dia 1.5Mts. Long M.S.D.F pipe- INo. 80mm dia M.S.D.F pipe l.0 mt. long - 2Nos 80mm dia M.S.D.F pipe2.0mt. long -1 No. 80x80x80mm dia M.S.D.F. Tee - 2Nos. 80mm dia blind flange - 1No. 80mm dia M.S.D.F.90° bend - 2Nos.Nut bolt & rubber packing -1 Set, 80mm dia cast steel gate valve 600ASA -2 Nos.80mm dia cast steel swing check valve600ASA -1 No. 80x80x80M.S.A.F. Tee. 2Nos

Supply of pressure gauge & compound gauge with control cook air line fitting requirement.

Tools.

Rubber Resistance Sheet IMt.x 2Mt x.025Mt.

200Amp TPN Switch fuse unit.

Servo Control Voltage Stabilizer 160KVA suitable for regulating incoming voltage 300 to 480Volt, outgoing voltage 415Volt with 315Amp. changeover switch and 50sq.mm 3½ Core copper cable, first filling of Transformer Oil and complete installation.

Installation,commissioning & testing of pumping plant at site

Painting of above pumping plant with 2 coat of enamel paint.

1 Month trial running and 5 months maintenance including watch & ward.

Testing of 2Nos.pump set at manufacturer works.

Carting of 2 sets of pumping plant with all material i.e. pumps motors, starters panel, pipe and special valves etc, from deptt. store haldwani to site of work road site then shifting by head load upto pump house in hilly zig-zag path.

Cetnrifugal Pumping Plants

GSM based Intelligent Remote Terminal Units (IRTU) with Analog and Digital parameters and features as specified to store and transmit data on GSM backbone to LMS. And also compatible to communication for two pumps.(2x1)

GSM Based wireless communication system capable to transfer data from remote sites control No. station with antenna.(2x1)

Intelligent Energy Meter.(2x1)

Valve actuator size 80mm.(2x2)

Actuator panel(2x2)

Isolation transformer(2x1)

Auto phase reversal unit 40-100H.P.(2x1)

Electromagnetic Insertion type Flow Meters for line sizes 80mm (2x1)

Cables (i) 2 Core Cable 1.5sq.mm. (2x100)

(ii) 4 Core Cable 2.5sq.mm. (2x40)

(iii) 10 Core Cable 1.5sq.mm. (2x30)

PVC conduit Pipe. (i) 1.5" (2x10)

AC& DC, Relay lugs etc.(2x1)

Installation, Testing, commissioning & customization of IRTU/PLC & software. (2x I)

Flow meter with clamps & Complete accessories.(2x1)

Actuator (2x2)

Construction of RCC CWR

Supply of all materials, labour T&Petc complete to construct Sump / CWR as per drawing includung cost of all pipes & fittings all complete-Capacity of Sump/CWR in 30.0 KL

Supply of all materials, labour T&Petc complete to construct Sump / CWR as per drawing includung cost of all pipes & fittings all complete-Capacity of Sump/CWR in 25.0 KL

Supply of all materials, labour T&Petc complete to construct Sump / CWR as per drawing includung cost of all pipes & fittings all complete-Capacity of Sump/CWR in 20.0 KL

Supply of all materials, labour T&Petc complete to construct Sump / CWR as per drawing includung cost of all pipes & fittings all complete-Capacity of Sump/CWR in 17.5 KL

Supply of all materials, labour T&Petc complete to construct Sump / CWR as per drawing includung cost of all pipes & fittings all complete-Capacity of Sump/CWR in 15.0 KL

Supply of all materials, labour T&Petc complete to construct Sump / CWR as per drawing includung cost of all pipes & fittings all complete-Capacity of Sump/CWR in 7.5 KL

Supply of MS bucket type chlorinator of 25 lier capacity chlorinator arrangements

R.R. stone masonry in cement & local sand (1:6) in foundation and Plinth . foundation & plinth including supply of material labour T & P etc. for proper completion of work..

Source Work

Providing & fixing of French Well as per departmental type & design complete.

Construction of 12 m long RCC check dam as per design and drawing

Cartage of materials

Cartage of GI Pipes from Tanakpur to site of work