PROVISION OF NEW MD ACCN AGAINST STRUCTURALLY UNSAFE MD ACCN (47 X OFFRS AND 107 X OR) AT BHUJ MIL STN (JOB NO S/2965)

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser Page No. 27 (R)

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 28

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 29 (R)

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 31 (R)

Lump sum price worked out by the contractor for "ROAD, HARDSTANDING/PATH" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 33 (R)

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 35

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Ser page No. 36 (R)

Lump sum price worked out by the contractor for "COMPOUND WALL & FENCING" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 38 (R)

Lump sum price worked out by the contractor for "HOT WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 39 (R)

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 40 (R)

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 43 (R)

Lump sum price worked out by the contractor for "HIGH MAST LIGHT AND STREET LIGHT" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Ser page No. 45 (R)

Sch 'A' PART-XIII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY S&F 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Cat No QQT-7037 or techno commercially equivalent of other makes

S & F two way bib cock cromium plated fancy type 15mm bore size complete all as specified and directed Make - Jaquar Queen series QQT or techno commercially equivalent of other make

S&F CP wall mixture 3 in-1 system including 1.50m long tele shower and connection for overhead shower with divertor handle complete ISI marked Make Jaquar Cat No QQT WHM 7281 or techno commercially equivalent of other make

S & F CP wall mixture 2 in-1 system with central spout and connection for over head shower with divertor lever complete Make - Jaquar Essco Series or techno commercially equivalent of other make

S&F over head Shower rose 75mm of ABS Body chrome plated with grey face plate & with arm having swivel joint cromium plated best quality Make Jaquar or techno commercially equivalent of other make

S&F 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout all as per sample Make JAQUAR or techno commercially equivalent of other make

S&F health foucet Make Jaquar ALD-573 or techno commercially equivalent of other make with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and as directed and approved by Engineer-in-Charge.

S & F two way bib cock cromium plated fancy type 15mm bore size complete all as specified and directed Make - Jaquar Queen series QQT or techno commercially equivalent of other make

S&F two way angle cock cromium plated fancy type 15 mm bore /size Make JAQUAR Essco series or techno commercially equivalent of other make

S&F 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Essco Serices or techno commercially equivalent of other make

S&F 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Cat No QQT-7053 or techno commercially equivalent of other make

S&F 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed Make Jaquar Essco series or techno commercially equivalent of other make

S&F CP concealed stop cock 15 mm bore complete Make Jaquqr Essco Series or techno commercially equivalent of other make

S&F over head Shower rose 100x100 mm of ABS Body chrome plated with grey face plate & with arm having swivel joint cromium plated best quality Make Jaquar or techno commercially equivalent of other make

S&F jet spray was system chromium plated steel body with flexible pipe complete all as specified and as directed and approved by Engineer-in-Charge.

S & F CP shower rose 50mm size complete all as specified and directed

S & F CI sluice valve with flanged ends of class 1.6 PN ISI marked with CI wheel drilled flanged ends heavy duty with brass spindles and gun metal working parts including flanged joints of both ends jointing materials such as rubber/fibre gasket suitable size bolts, nuts, washer etc complete of size 150 mm dia in trenches complete all as specified and directed by Engineer in charge

S & F CI sluice valve with flanged ends of class 1.6 PN ISI marked with CI wheel drilled flanged ends heavy duty with brass spindles and gun metal working parts including flanged joints of both ends jointing materials such as rubber/fibre gasket suitable size bolts, nuts, washer etc complete of size 100 mm dia in trenches complete all as specified and directed by Engineer in Charge

S & F CI sluice valve with flanged ends of class 1.6 PN ISI marked with CI wheel drilled flanged ends heavy duty with brass spindles and gun metal working parts including flanged joints of both ends jointing materials such as rubber/fibre gasket suitable size bolts, nuts, washer etc complete of size 80 mm dia in trenches complete all as specified and directed by Engineer in Charge

S & F CI foot valve with flanged ends of size 100 mm dia conforming to IS 4038 and gun metal working parts including flanged joints and jointing materials such as rubber/gasket suitable size bolts, nuts, washer etc complete in trenches complete all as specified and directed

Taking out old unserviceable GI pipe of 50/40/25 mm dia

Taking out old unserviceable GI gate valve of 50/40/25 mm dia

Supply, install, test and commissioning self priming centrifugal pumpset 10 HP with discharge of 50,000 ltr per hour at a head of 22 m direct coupled including brass impeller suitable PCC foundations with anti vibration rubber pads flexible connector both side i.e suction and delivery Foot mounted (B3),Fan cooled motor suitable for 415V,3 phase,50 Hz,insulation class FS1 duty, ambient of 50 C conforming to IS 12615:2011,IEC 60034-30-2008 and IP 65 protection complete all as specified and directed.

Supply, install, test and commissioning of star delta starter suitable for 10 HP Motor with thermal protection and single phasing protection phase sequence under and over voltage relay digital ammeter and voltmeter RYB phase indicator test to trip facility complete all as specified and directed.

Supply and fix cast iron air valves heavy duty and gun metal working parts including flanged joints both ends jointing materials such as rubber/fibre board gasket suitable size bolts, nuts, washer etc with double action air outlets,confirming to IS 14845 of size 100 mm dia bore and fixing up in cast iron water supply mains of size 100 mm dia.

Supply and fix cast iron Non Return Valve heavy duty and gun metal working parts including flanged joints both ends jointing materials such as rubber/fibre board gasket suitable size bolts, nuts, washer etcconfirming to IS 5312 of size 80 mm dia bore and fixing up in cast iron water supply mains of size 80 mm dia.

M & L for Construction of new PCC solid Masonary valve chamber of size 450 X450 X 450 mm (Internal dimensions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 50 mm X 50 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

M & L for Construction of new PCC solid Masonary valve chamber of size 1000 X800 X 1000 mm (Internal dimensions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 50 mm X 50 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

Supply and fixing Water level Sensor suitable for 50000 Gln water Capacity Over head Tank .Type-Hydrostatic,Range-0-4 Meter.Output-4 to 20 Mili Amp complete all as specified by Engineer in Charge.

Supply and fixing Water level indicator 7 segment 4 digit LED dis play.Input-4 to 20 Mili Amp.Power Supply-230 Volt AC complete all as specified by Engineer in Charge.

EXTERNAL ELECTRIC SUPPLY Taking out old unserviceable/ burnt LT under ground cable of any size and capacity

Supply and fixing energy saving 9 watt LED bulb all as specified and directed

Supply and fixing decorative mirror type LED tube light fitting 1 x 9/10 watt including LED tube with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sqmm size complete all as specified and directed Make - Cat Part No Havells : LUMILINES9WLED865PCWH or equivalent in Wipro/Philips/Crompton Greaves

Supply and fixing decorative box type LED tube light fitting 1 x 20/18 watt including LED tube with IP20 protection, inbuilt driver etc complete with all accessoreis internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sqmm size complete all as specified and directed Make - Cat Part No LTT8-20 for LED tube and DMLN1LT8-16 for batten of Compton or equivalent in Wipro/Philips

S & F heavy duty exhaust fans of 250mm sweep suitable for SP 230/250 v 50 Hz AC supply comploete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed

S & F heavy duty exhaust fans of 300mm sweep suitable for SP 230/250 v 50 Hz AC supply comploete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connectiong with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductor from ceiling rose to fan complete all as specified and directed

S & F ceiling fans 1200mm sweep energy efficient five star rated including rods and connecting up with 3 runs of 1.5 sqmm single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked from ceiling rose to fan complete all as specified and directed

S & F LED security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver upto 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.0 sqmm fixed with & copper conductor sheathed cable of size 1.0 sqmm fixed with & including bracket made of GI pipe 25mm bore light grade, 1.2 mtr long bent to shape required with 02 Nos MS clamps of suitable size and length nuts & bolts complete all as specified and directed

S & F MCBs, 10 KA rupturing capacity, 'C' Series, IS-8828 marked of the undermentioned type and rating and fixing in DBs (DBs catered separately in this schedule) Make - Legrand/L&T/ABB/Havels complete all as specified and directed :-

MCB SP 6 TO 32 AMP

SPN MCB 40/32 AMP

TPN MCB 32/40 AMP 16 KA

Supply,install, test and commisioning 400 KVA, 11/0.433 KV, 3 Phase, 50 HZ, Dyn 11, Outdoor ONAN type, copper wound, oil immersed naturally cooled, step down transformer conforming to BEE standards with off circuit tap changing arrangement of HV side in steps of +5% to -10% in step of 2.5% each and having cable end box on HV & LV side, the cable box at LV/HV side should be suitable to house for proper size and capacity of out going aluminium cable and to be provided with all standard accessories and first filling of filtred dehydrated transformer oil of IS-335 complete as per specification and conforming to IS:1180:2014, Energy efficiency level-3 (equivalent to old BEE 5 star) as per IS-1180/2014/Part-II. The transformer shall be following standard accessories complete all as directed :- (a) Namer rating & diagram plate - 01 No (b) Off circuit tap changing switch - 01 No (c) Earthing terminal - 02 Nos (d) Lifting lugs - 02 Nos (e) Oil level indicator (flush tube) - 01 No (f) Oil drain valve with plug - 01 No (g) Conservator with oil filling hole - 01 No (h) Thermeter pocket - 01 No (j) 4" dial type thermometer stem type with MRP-01 No (k) Air release plug - 01 No (l) Silicagel breather - 01 No (m) Removable inspection opening - 01 No (on and above 315 KVA) (n) Unidirectional CI rollers - 04 Nos

All as per item No 54.00 above but for transformer capacity of 315 KVA

Note for item No 53.00 & 54.00 The rate quoted inclusive for Transformer platform of size 3 x 3 x 1.5 meter from GL including excavation, PCC, brick work and chain link fencing 1.5 meter internal on each side from platform and height 1.5 meter with a 4mm dia GI wire 150 x 100 mesh, MS work angle iron 50 x 50 x 6 mm and suitable size MS gate including locking arrangement with painting one coat of red oxide paint and two coats of aluminium paint, 40mm graded gravel 150mm heigh spreading inside the fencing area complete all as specified and directed by Engineer in Charge.

Supply and fix HT 11 KV, outdoor type gang operated air break switch suitable for vertical mounting fixed type complete with 9 insulators of rating upto 200 amps and steel frame with GI operating rod of suitable length and size with operating mechanism including working arrangement complete all as specified and directed

Supply and fixing single phase electronic meter LPR type temper proof with LCD display 50 HZ, 240 volts, 10 to 60 amps,Accuracy cl.1.o complete all as specified and directed.

Supply and fixing of LED aviation light for die cast aluminium housing with red polycarbonate dome for illumination,integral driver,IP 65 and super flux 5mm 302 nos LEDs incorporated.Input voltage 100-270 Volts AC.life time 50000 Hrs complete all as specified by Engineer in Charge.

Supply & fix MCB SPN 230V, 6- 40Amps,B Curve, 10 KA rating ISI marked and connecting complete all as specified.

Supply & fix MCB SP 230V 6Amps to 32 Amps,B curve, 10 KA rating ISI marked and connecting complete all as specified.

Material and labour for Boring of holes under road, pavement hard standing by trenchless technology using Horizental Directional Drilling (HDD) Machine and necessary machine incl HDPE pipe 100 mm dia suitable size complete all as specified and directed.

Supply and install ON LOAD change over switch 415 V in sheet metal enclosure 4 Pole of capacity 63 Amps and confirmed to IEC 947-3,EN-60947-3 AC complete all as specified and directed.

M & L for sub main wiring with 2 runs of 4 Sq.mm size main cable and one run of 4 Sqmm size earth continuity single core PVC insulated but unsheathed FRLS cable multi stranded copper conductors, 1100V grade conforming to IS - 694 drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/accessories all concealed to the wall /ceiling complete all as specified and directed.

M & L for sub main wiring with 2 runs of 6 Sq.mm size main cable and one run of 6 Sqmm size earth continuity single core PVC insulated but unsheathed FRLS cable multi stranded copper conductors, 1100V grade confirming to IS - 694 drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/accessories all concealed to the wall/ceiling complete all as specified and directed.

M & L for sub main wiring with four runs of 6 Sq.mm size main cable and two run of 4 Sqmm size earth continuity single core PVC insulated but unsheathed FRLS cable multi stranded copper conductors, 1100V grade confirming to IS - 694 drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/accessories all concealed to the wall/ceiling complete all as specified and directed. Note for submain wiring items : The above mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall bemeasured as one run length. The small extra lengths required for loops etc for connection in DBs are deemed to the included and only the cable covered in conduit shall be measured.

M & L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth strip 32x6mm GI as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of protection pipe galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete as detailed below and all as directed. NOTES :- (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC M25 design mix using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Item includes the cost of 7.5 M GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.5 M earth lead GI strip. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’ (ii) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe

S & F TV/Telephone socket outlet, including, MS Box of size 100x100x65mm with cover plate complete all as specified and directed (includes 2 No of TV and 2 Nos of telephone for officer and 111 TV points for ORs and civilian)

S & F 25 litres capacity geyser storage type 5 star rating with necessary holes in walls with drilling machine and grouting foundation nuts and bolts in wall and doing necessary connecting work and making all electrical connections complete all as specified and directed by Engineer-in-Charge

M&L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

M&L for Sand filling under floors or in foundations includingspreading ,leveling,ramming, watering and consolidation complete .

M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as specified and directed. (Note:- For the purpose of payment only punned thickness will be measured. )

Supply and fixing mounting bracket made out of medium grade GI tubing 32mm bore 1.5 M long & bend to shape including 02 Nos MS Clamps, Nut Bolts, Washers etc all as directed by EIC.

Supply and fix LED street Light fitting 45 watt ,IP 65 4500 system Lumen,50000 burning hours @L70,with NABL Accridated lab LM 79 report,LM80 complete all as specified and directed

Supply and fixing Nature switch integrated models outdoor type timer control street light auto ON-OFF for 3 phase load of maximum capacity 5 KW include incoming-outgoing MCBs,Power Contactor and SMC Enclosure (Sintex make) for encasing complete single phase circuit board with nature switch-02.Make-Model-SWADEEP-02EC 5KW3P of Healer Enterprises or higher equivalent other make as specified.

Supply and fix in repairs Weather Proof PVC Junction Box made out of not less than 2 mm thick of size 250x200x100 mm (approx) complete with hinged door locking arrangement and consisting of 04 Nos aluminium bus bar of rating 32 Amp for phase and neutral on poreclain based insulator and fixing clamp to pole MCB SP 06 Amps 10 KA - 01 No incl 02 Nos Cable Glands suitable for inserting cable not less than 50 sqmm with 02 No 01 mm GI plate (150x50mm) having two holes as per the size of cable glands, fixed with cable gland for earth connectivity confirming to IP 65 complete including fixing on street light pole with MS Clamps, bolts, nuts and washers complete all as specified and directed

M&L WMM 150 mm thick (compacted thickness) in two layers conforming to the grading given in table 400-13 & physical requirement given in table 400-12 spread with mechanical means & rolle by using8-10 ton vibratory power roller over compacted sub grade surface as specified in clause 406.3.5 of MORTH & H specification complete all as specified & directed.

M & L Preparing Concrete/bituminous surfaces and painting lines,Dashes (Continuous /Uninterrupted) arrows, letters, etc exceeding 10 cm width with hot appliede thermo plastic road marking materials all as specified in clause 803.4 of MoSRT & H Specification white or golden yellow ( IS Colour No 356) over a coat of primer complete all using road painting Machine all as specified and directed by Engineer-in-Charge.

S & F CI wheel as rollers of 80mm dia for gates

S & F cattle trap made out of mild steel sections such angle, channel, frame & 50mm dia GI pipe all as specified and directed

Supply, install, testing and commissioning of solar hot water system, flat plate collector type with heat exchanger of 100 Ltr per day capacity with electrical heating backup 3 KW with thermostat including electric connection from DB with 4 Sqmm multi stranded copper conductor unsheathed FRLS wire complete all as specified and directed

Supply, install, testing and commissioning of solar hot water system, flat plate collector type with heat exchanger of 200 Ltr per day capacity with electrical heating backup 3 KW with thermostat including electric connection from DB with 4 Sqmm multi stranded copper conductor unsheathed FRLS wire complete all as specified and directed

Supply, install, testing and commissioning of solar hot water system, flat plate collector type with heat exchanger of 300 Ltr per day capacity with electrical heating backup 4 KW with thermostat including electric connection from DB with 4 Sqmm multi stranded copper counductor unsheathed FRLS wire complete all as specified and directed

NOTE APPLICABLE FOR ITEMS OF ALL LED LIGHTS (i) The LED lights shall have guarantee for 5 years from date of completion of contract, any defects noticed during this period shall be rectified/parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL, Cat No LSTS-30-CDL of Crompton or equivalent as per make listed in Appx 'C'.

Neem or Limbdo

Mango

Nariyal- Coconut

Chicoo

Jamun

Complete demolition of toilet block of PBOR Md Accn (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg Nos P-90, P-91, P-92, P-93, P-94 & P-95)

Complete demolition of PBOR Md Accn (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-75)

Complete demolition of Type 'C' Accn (MES Civ) (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-40)

Complete demolition of Offrs Md Accn (Maj) (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-39, P-40 & P-41)

Complete demolition of Offrs Md Accn (Capt) (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-65)

Complete demolition of Offrs Md Accn (Maj) (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-73)

Complete demolition of Offrs Md Accn (Capt) (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-101)

Complete demolition of Offrs Md Accn (Capt)(on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-103, P-104, P-105, P-106 & P-107)

Complete demolition of Offrs Md Accn (Capt) (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-109)

Complete demolition of Offrs Md Accn (Lt) (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-125)

Complete demolition of PBOR Md Accn (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-17 & P-18)

Complete demolition of PBOR Md Accn (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-20)

Complete demolition of PBOR Md Accn (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-14)

Complete demolition of PBOR Md Accn (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-34)

Complete demolition of PBOR Md Accn (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge (Bldg No P-100)

PROVISIONAL LUMP SUM (PLS) Provide Provisional lump sum for M&L for construction of Rain water harvesting Pit of 3.00 metre dia and 5.5 metre depth (03 Nos) complete all as per Drg No CEBZ/TD/50/2011 complete all as specified and directed

NOTE FOR ITEM NO 110.00 (1) Provisional lump sum shall be expended wholly or in parts as directed by GE. The works under Provisional Lump Sum shall be measured and paid for at applicable rates in MES SSR 2010 Part-II subject to percentage ( + or - denomination) computed under last column of this schedule above/below the provisional lump sum price worked out by the MES. (2) For details refer relavent TD drawings.

RAGHUSONS INFRA ENGINEERING PVT. LTD

SHRI GURMUKHDAS CONTRACTORS PVT. LTD.

DHARIWAL TRADERS PRIVATE LIMITED

GANGA INFRABUILD PVT LTD

Hariom Projects Pvt Ltd

KHETA RAM RAGHUNATH RAM CONST CO PVT LTD

Agarwal Jagdish Construction Company Private Limited

ASHISH JINDAL BUILDERS PVT. LTD.

SOOD ASSOCIATES PVT LTD