Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.0 L
EMD Value
₹17,568
Closing Date
29 Oct 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Executive Engineer
O/o Assistant Executive Engineer, PWD Buildings Sub Division, Chittur-Pudunagaram
Running Contract Works-RC Works for various buildings under Buildings Section Nemmara 2025-26
2025_PWD_812505_1
PWD/BLDG/10855/2025-2026
Open Tender
Civil Works - Buildings
Item Rate
365 days
Nemmara
Please refer Tender documents.
12 documents required · 12 mandatory
₹1,550
Yes
₹17,568
Yes
21 Oct 2025
21 Oct 2025
1 Nov 2025
21 Oct 2025
29 Oct 2025
21 Oct 2025
Work Name:GENERAL-Running Contract Works-RC Works for various buildings under Buildings Section Nemmara 2025-26-General Civil Work
㈱㐮㨸牐癯摩湩…楦楸杮漠潲景瀠敲獳摥挠慬⁹楴敬⠠慍杮污牯楴敬 景㈠‰浭渠浯湩污琠楨正敮獳愠摮漠灡牰癯摥猠穩湡獡瀠牥愠灰潲敶慰瑴牥湯猠整汥映慲敭眠牯潣灭敬整⠠瑳敥牦浡潷歲琠敢瀠楡敳慰慲整祬贩〵㤮ㄮ⸴㨱畓灰祬湩湡楦楸杮䄠橮汩⁹潷摯爠慥数獲漠楳敺㔠砰㔲洠楷桴眠物慮汩湩汣摵湩潣瑳愠摮挠湯敶慹据景洠瑡牥慩獬攠捴潣灭敬整̮畣襭〵㤮ㄮ⸳㨱畓灰祬湩湡楦楸杮䄠橮汩⁹潷摯眠潲杵瑨愠摮瀠瑵甠⁰潦潲景洠浥敢獲椠据畬楤杮挠獯⁴湡潣癮祥湡散漠慭整楲污瑥挠浯汰瑥蠮㠱㔮⸴㨲牐癯摩湩湡楦楸杮倠䵔⁔楢潣正漠灡牰癯摥焠慵楬祴愠摮挠汯畯㔱洠潮業慮潢敲㈱′浭氠湯Ⱨ眠楥桧湩潮⁴敬獳琠慨㤹朠獭e⸸㐶债潲楶楤杮愠摮映硩湩呐呍猠楷敶汬湩桳睯牥㔱洠潮業慮潢敲敷杩楨杮渠瑯氠獥桴湡㐠‰浧渀꽯㠱㘮㨵牐癯摩湩湡楦楸杮倠䵔⁔潓灡䐠獩潈摬牥栠癡湩敬杮桴漠㌱‸浭牢慥瑤〱′浭敨杩瑨漠㔷洠楷桴挠湯散污摥映瑩楴杮牡慲杮浥湥獴敷杩楨杮渠瑯氠獥桴湡ㄠ㘰朠獭洮㠱㐮⸹㨱牐癯摩湩湡楦楸杮䌠倮戠慲獳戠扩挠捯景愠灰潲敶畱污瑩⁹潣普牯業杮琠卉›㤸ㄳㄮ‵浭渠浯湩污戠牯齥㠱㔮⸱㨱牐癯摩湩湡楦楸杮䌠倮牢獡潬杮戠摯⁹楢潣正漠灡牰癯摥焠慵楬祴挠湯潦浲湩潴䤠⁓瑳湡慤摲湡敷杩楨杮渠瑯氠獥桴湡㘠〹朠獭ㄮ‵浭渠浯湩污戠牯둥㜱㈮ㄮ债潲楶楤杮愠摮映硩湩桷瑩楶牴潥獵挠楨慮瀠摥獥慴祴数眠瑡牥挠潬敳⁴䔨牵灯慥祴数圠䌮慰⥮眠瑩敳瑡愠摮氠摩〱氠瑩敲氠睯氠癥汥眠楨整倠嘮䌮汦獵楨杮挠獩整湲湩汣摵湩汦獵楰数楷桴洠湡慵汬⁹潣瑮潲汬摥搠癥捩栨湡汤敬敶⥲潣普牯業杮琠卉㨠㜠㌲ⰱ眠瑩污楦瑴湩獧愠摮映硩畴敲潣灭敬整湩汣摵湩畣瑴湩湡慭楫杮朠潯桴慷汬湡汦潯獲眠敨敲敶敲畱物摥场䌮慰楷桴䤠䥓洠牡敫桷瑩潳楬汰獡楴敳瑡愠摮氠摩"伀ㅄㄴ㌶⼵〲㔲㈭㈰㨶湅慧楧杮挠潯楬ͥ慄᩹䑏㐱㘱㘳㈯㈰ⴵ〲㘲债啌䉍剅伀ㅄㄴ㌶⼴〲㔲㈭㈰㨶䅃偒久䅔げ〱ㄮ⸶㨲瑓敥潷歲椠畢汩⁴灵琠扵汵牡⠠潲湵Ɽ猠畱牡牯爠捥慴杮汵牡栠汯潬⁷畴敢瑥 牴獵敳瑥湩汣摵湩畣瑴湩Ⱨ栠楯瑳湩Ⱨ映硩湩潰楳楴湯愠
proportions all complete as per the direction of Engineer in charge.ù11.37A:Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.¬14.76:Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of [email protected]:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 14.85:Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.450.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall450.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wallj21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)ó13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .G13.71:Lettering with black Japan pint of approved brand and manufactureper Letter per cm height}OD141644/2025-2026:Engaging sewer man for cleaning and clearing the sewerage line as per the direction of engineer in chargeeOD141645/2025-2026:MP Hip and ridge tiles set in CM 1:2 including finishing edges (Using Dept. Tiles)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.68 MB
BOQ_1357905.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .