Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹22.1 L
EMD Value
₹66,100
Closing Date
24 Oct 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Ex. Engineer JSD PHE GWD Srinagar
Ex. Engineer JSD PHE GWD Srinagar, Bagi Ali Ali Marardan Khan Nowshera Srinagar
Construction of 200 mm dia DTH / ODEX Method Production Bore Well at Waderpati and Batgagal in District Kupwara.
2026_PHE_327725_1
e-NIT No 72 of 2026-27
Open Tender
Drilling Works
Percentage
45 days
Waderpati and Batgagal in District Kupwara.
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
Ex. Engineer JSD PHE GWD Srinagar
₹66,100
Yes
10 Oct 2026
10 Oct 2026
26 Oct 2026
10 Oct 2026
24 Oct 2026
10 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | On account of hiring charges of Hydro Geologist by firm for ground water feasibility survey and resistivity test by latest equipment's for identified site and subsequently furnishing of report to the department before construction of well is taken in hand by the firm | 1 | Job | 20,000 | ₹20,000 |
| 2 | Boring/drilling 200 mm dia. Bore well and simultaneous lowering of casing/ strainer pipe, by DTH/ODEX method prescribed in SI: 2800 (part I), by fixing casing drive shoe including observing of samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level. | 90 | Mtr | 8,000 | ₹7,20,000 |
| 3 | Boring/drilling 200 mm dia. Bore well and simultaneous lowering of casing/ strainer pipe, by DTH/ODEX method prescribed in SI: 2800 (part I), by fixing case drive shoe including observing of samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 90 m and upto 150 m depth below ground level. | 60 | Mtr | 8,200 | ₹4,92,000 |
| 4 | Supplying, assembling, subsequent lowering and fixing in vertical position in above bore using ODEX method by double layer welding, ERW FE 410 M.S plain, bevel ended casing pipe of 200 mm dia. Having wall thickness not less then 6.40 mm and confirming to IS:4270. The casing pipes supplied should be of reputed and approved make supported with manufacturers latest test certificated including painting of outside surface with two coats of anticorrosive paint and required hire &labour charges, fitting and accessories, all complete for all depths, The job includes Fabrication, flushing of holes in the pipes as per strata of the bore. | 150 | Mtr | 5,500 | ₹8,25,000 |
| 5 | Development of the tube well in accordance with IS:2800(Part-I) and IS: 1189 to establish maximum rate of usable water yield without sand contents with required capacity of air compressor run for required time till well shall be fully developed. The job includes measuring static water level, draw down and safe yield using step draw down method by lowering of suitable capacity of submersible pumping unit run on DG set till the safe yield is achieved. Moreover, collecting the water sample from the explored well and shall be tested at PHE central laboratory after disinfecting the bore well. The complete job shall included hire and labour charges of air compressor, DG set, pumping unit along with column pipes, starter, cable, tools and accessories etc required at site for harnessing. | 1 | Job | 1,50,000 | ₹1,50,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.17 MB
BOQ_1108996.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .