109/EDCG/2024-25

Amount

Loading Carriage & unloading of following materials from centre store to work site and its stacking Distance approx (0-100) Kms

a) Line Material

b) PCC Pole

c) STP pole 11 Mtr. Long

d) T/F16/25/63 KVA

e) ACSR Rabit/dog/Racoon/weasel/conductor

f) ABC (3x120/95/70/25/16) Sqmm

g) 11KV XLPE cable (3x35/70/120/185/240)

h) 11 KV pilfer resistant matrial cubical

i) 11KV pole mounted CT/PT

j) DP Box 3 phase

Fabrication, erection of sub-station type double pole on 8.5 Mtr long PCC/11Mtr Long ST pole along with fixing of necessary hardware of double pole along with necessary pin insulator as per RESPO specification and direction of E/I

Dragging of ST/PCC pole to pit site digging of pit erection and grouting (as per RESPO norms) of 11KV pin/Disc insulator guarding angle (1.8 mm 65x65x6) with nut & bolt its ramming as per RESPO specificaTION.

Fabrication, erection, T-Off pole single section pole along with T-Off channel clamp disc fitting & pin accessories, grounting in 1:4:8 cement sand and brick ballast as per RESPO specifiation

Grouting of pole with bricks ballas and sand and cement ratio 1:4:8

Providing nut bolts washers of sizes

Ordinary earthing by MS earth Rod 2500mm long as per RESPO schedule. Only GI wire & earth rod shall be supplied by the department

Fabrication erectgion Toff pole single section pole alongwith T Off Channel,clamp ,disk fitting and pin accessories

Grouting and Nuzzling of stay set complete including its grouting by civil material (sand brick ballast cement ) only stay wire shall be supplied by the department

Laying and sagging of 3 phase 3 wire 11KV line on ACSR wease/rabbit/Raccoon/Dog conductor as per RESPO specification and direction of E/I

Providing and fixing of guarding angle on existing 11KV support with clamp and nut bolts

Cradle guarding if HT line by GI wire shall be supplied by the department

Erection & commisioning of (3x120/95/70/25/16Sq.mm)

Laying of cable 11KV XLPE cable (3x35/70/120/185/240) sqmm in pakka road by boring method laying cable as per RESPO specification & direction of E/I

Laying of cable 11KV through piping

Hoisting of 11KV XLPE cable will be passed through MS pipe of required size duly clamped with pole at the bottom middle and top of the pole

Supply and Fixing of 11KV cable joining kit O/D and I/D

Installation of 11 KV CT/PT on double polle connect with metering unit along with providing and fixing of all accessories such as S/S base, MS flat, clamps nut and bolts jumpering and commisioning

Construction of brick masonry plinth suitable for installation of 11KV pilfer metering cubical along with plastering.

Dragging of 11KV pilfer metering cubical inside the metering room, its installation and commisioning.

Fixing of 3 phase distribution box/ kiosk on the LT poles including all clamps and meterial required for mounting connections and sealing.

High Pressure testing of 11 KV(3x35/70/12/185/240)XLPE along with arrangement of high pressure equipment.

Providing of Holding Clamp for TOP dropper T/F

Providing of Holding Clamp for PCC/STP Poles

Providing of F clamp for PCC /STP Poles

Drigging cutting and maing of hole

Cutting and chopping of tree branches for clearence of HT/LT line after clearance line throughout pieces of tree branches of site as and when required for completion of work.

Safe installation & Energisation of 16/25/63 KVA T/F on double pole by providing and fixing of L piece lugs making HT/LT connection and its commisioning only transformer shall be supplied by the deparment.

Safe installation & Energisation of 100/250/400/630 KVA T/F on double pole by providing and fixing of L piece lugs making HT/LT connection and its commisioning only transformer shall be supplied by the deparment.

FIXING OF WELL TYPE EARTHING 01 NO NUTRAL BODY AND 01 NO BODY

MAKING OF PLINTH.

MAKING OF FENCING FOR TRANSFORMER.

GST Extra

M/s Mishra Traders (BID ID -4818749)

M/S JAISWAL INTERPRISES (BID ID -4819022)