PROVIDING - INSTALLATION OF CENTRAL HEATING SYSTEM ALL AS PER PERTICULAR SPECNS-SCHEDULE-A AT HQ762BRTF INCLS ALLIED UNITS , LEFT OVER BUILDINGS AND MULTIPURPOSE HALL OF HQ CE (P) VIJAYAK AT KARGIL UNDER 55RCC-762BRTF OF VIJAYAK IN LADAKH(UT)

Amount

Providing, Installation and commissioning of Central Heating System Work at HQ 762 BRTF (including Allied Units) and HQ CE (P) Vijayak at Kargil

HOT WATER GENERATOR Supply, installation, Testing & Commissioning of oil fired glycol based Hot Water Generator using Kerosene/HSD oil of capacity 2,00,000 Kcal/Hr at MSL, all complete all as per particular Specification. Make: Alarko carrier/Thermax.

HOT WATER GENERATOR Supply, installation, Testing & Commissioning of oil fired glycol based Hot Water Generator using Kerosene/HSD oil of capacity 80,000 Kcal/Hr at MSL, all complete all as per particular Specification. Make: Alarko carrier/Thermax

GLYCOL CIRCULATION CENTRIFUGAL PUMPS:- Supply, installation, testing & commissioning of monoblock centrifugal pump driven by suitable capacity electric motor and mechanical seal bearing temperature upto 90 ºC for ethylene glycol of 36 Mtr head complete with accessories including cement concrete foundation and all as specified and directed of 09 lps flow rate 7.5HP . (one working & one standby). Make kirloskar/beacon

GLYCOL CIRCULATION CENTRIFUGAL PUMPS:- Supply, installation, testing & commissioning of monoblock centrifugal pump driven by suitable capacity electric motor and mechanical seal bearing temperature upto 90 ºC for ethylene glycol of 24 Mtr head complete with accessories including cement concrete foundation and all as specified and directed of 4.9 lps flow rate 3HP . (one working & one standby). Make kirloskar/beacon

GLYCOL CIRCULATION CENTRIFUGAL PUMPS:- Supply, installation, testing & commissioning of monoblock centrifugal pump driven by suitable capacity electric motor and mechanical seal bearing temperature upto 90 ºC for ethylene glycol of 28 Mtr head complete with accessories including cement concrete foundation and all as specified and directed of 13 lps flow rate 7.5HP . (one working & one standby). Make kirloskar/beacon

GLYCOL MAKE UP CENTRIFUGAL PUMPS:- Supply , installation, testing and commissioning of mono block Centrifugal Pump with Bronze impeller, driven by suitable capacity electric motor for glycol fluid make up and mixing complete with accessories including cement concrete foundation suitable for a flow rate of 5 LPS and 18 mtr head ) 0.5HP

FLUE GAS CHIMNEY:- Supply and installation of MS flue gas chimney ,all as per particular specifications

EXPANSION TANK: Supply & Installation of overhead expansion tank of size 500 Liters all as per particular specifications

EXPANSION TANK: Supply & Installation of overhead expansion tank of size 200 Liters all as per particular specifications

DAY OIL STORAGE TANK: Supply, installation, testing and commissioning of Kerosene/HSD oil Day service Tank rectangular MS construction with capacity of 990 Liters all as per Particular specifications

MS HSD Oil Piping of size 25mm for Day oil storage tank at Item Srl No. 1.10

Ball valves of sizes 25 mm for Day oil storage tank at Item Srl No. 1.10

Non Return Valve 25mm for Day oil storage tank at Item Srl No. 1.10

Y-Oil Strainer 25mm for Day oil storage tank at Item Srl No. 1.10

GI Ball valves of sizes 15 mm make cim/castle for Day oil storage tank at Item Srl No. 1.10.

DAY OIL STORAGE TANK: Supply, installation, testing and commissioning of Kerosene/HSD oil Day service Tank rectangular MS construction with capacity of 500 Liters all as per Particular specifications

Ball valves of sizes 25 mm for Day oil storage tank at Item Srl No. 1.15

Non Return Valve 25mm for Day oil storage tank at Item Srl No. 1.15.

Y-Oil Strainer 25mm for Day oil storage tank at Item Srl No. 1.15.

GI Ball valves of sizes 15 mm make cim/castle for Day oil storage tank at Item Srl No. 1.15

HOT AIR GENERATOR Supply, installation, Testing & Commissioning of oil fired ,fully automatic Hot Air Generator using Kerosene/HSD oil of capacity 50,000 Kcal/Hr, fitted with automatic stabilizer of capacity 1 KW all complete all as per particular Specification. Make: Maktek: Model MT 50

Supply and installation of XLPE insulation sheet 25 mm thick with aluminum reinforcement for Hot Air Generator mentioned @ S No 1.20

HOT GLYCOL FLUID PIPING:- Supplying and laying, connecting, fixing and testing of M S ERW ‘C’ class 80 mm dia pipe complete with fittings, all as per particular specifications

HOT GLYCOL FLUID PIPING:- Supplying and laying, connecting, fixing and testing of M S ERW ‘C’ class 40 mm dia pipe complete with fittings, all as per particular specifications

LT PANELS:- Supply, assembly, erection , testing & commissioning of dust, damp and vermin proof free standing CPRI approved factory built sheet steel enclosed LT main distribution board suitable for 3 Ph 415V 50 Hz to be installed in Plant room ,all as per particular specification

LT PANELS:- Supply, assembly, erection , testing & commissioning of dust, damp and vermin proof free standing CPRI approved factory built sheet steel enclosed LT main distribution board suitable for 3 Ph 220V 50 Hz to be installed in Plant room ,all as per particular specification

CABLE TRAYS:- Fabricating and installing 100 mm width x 50 mm depth of perforated M.S. Cable trays for cabling work in plant room, all as per particular specifications

CABLES:- Supplying of 3 X 6 Sq.mm (Al) of insulated PVC sheathed aluminum copper conductor armored cables of 1.1 KV grade confirming to IS -1554 . (Make Havells/Polycab)

CABLES:- Supplying of 3 X 4 Sq.mm ( Al ) of insulated PVC sheathed aluminum copper conductor armored cables of 1.1 KV grade confirming to IS -1554 . (Make havells/polycab)

CABLES:- Supplying of 4 X 1.5 Sq.mm (cu) of insulated PVC sheathed aluminum copper conductor armored cables of 1.1 KV grade confirming to IS -1554 . (Make havells/polycab)

ELECTRICAL ACCESSORIES:- Providing “ No Smoking “ and “ Flammable” sign board as per requirement of Petroleum Rules and CCOE Nagpur).

Earthing complete with galvanized steel earth plate electrode 60cm x60 cm x6 mm thick buried in ground ( earth pit not less than 2.25 meters deep below normal ground level with top edge of the plate not less than 1.5 meters below normal ground level, connecting to the Galvanized iron earth lead 32x6 mm size by means of bolts, nits check nits and washers of galvanized iron and 32 x6 mm earth lead protection by provision of GI light grade pipe 40 mm bore including provision of concentrate pit in PCC (1:2:4) type by using B -1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC 1:2:4) reinforced with XPM ( weigh not less than 4gs / sqm ) and frame of angle iron 25 mm x 25 mm x6 mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at the bottom 1.75 meter long placed on top edge of earth plate common salt and charcoal filling test point made out of 40 mm x 8 mm FI with fixing arrangements, funnel, wire mesh and earth work in hard/ dense soil , returning filling in and removal of surplus soil to a distance not exceeding 59 meters, all a per electrical plate No 5 of SSR-1991 Part ! and connecting to earth test point all as specified or indicated including testing on completion

Supply, installation, Testing & Commissioning of PP-R pipes in “C” class Grade PN-20 complete with all fittings including sockets, elbos, reducers etc of size 63 mm dia with 13 mm thick nitrile insulation

Supply, installation, Testing & Commissioning of PP-R pipes in “C” class Grade PN-20 complete with all fittings including sockets, elbos, reducers etc of size 50 mm dia with 13 mm thick nitrile insulation

Supply, installation, Testing & Commissioning of PP-R pipes in “C” class Grade PN-20 complete with all fittings including sockets, elbos, reducers etc of size 40 mm dia with 13 mm thick nitrile insulation

Supply, installation, Testing & Commissioning of PP-R pipes in “C” class Grade PN-20 complete with all fittings including sockets, elbos, reducers etc of size 32 mm dia with 13 mm thick nitrile insulation

Supply, installation, Testing & Commissioning of PP-R pipes in “C” class Grade PN-20 complete with all fittings including sockets, elbos, reducers etc of size 25 mm dia with 13 mm thick nitrile insulation

Supply, installation, Testing & Commissioning of decorative wall mounted imported radiator units complete with grill, wall mounting bracket inlet outlet manifold, size 33 X 600 X 2000 (triple panel)

Supply, installation, Testing & Commissioning of decorative wall mounted Imported radiator units complete with grill, wall mounting bracket inlet outlet manifold, size 33 X 600 X 2600 (triple panel)

Supply, installation, Testing & Commissioning of decorative wall mounted imported radiator units complete with grill, wall mounting bracket inlet outlet manifold, size 33 X 600 X 1600 (triple panel)

Supply, installation, Testing & Commissioning of decorative wall mounted imported radiator units complete with grill, wall mounting bracket inlet outlet manifold, size 33 X 600 X 1800 (triple panel)

Supply, installation, Testing & Commissioning of decorative wall mounted fan coil units complete with grill, wall mounting bracket inlet outlet Ball valves capacity 6000 KCAL/HR

Providing and addition of Glycol suitable upto a temperature of -40°C

Supply and installation of Servo stablizer 3 phase oil cooled 12.5kva with high and low cut off 150-460volts.

Supply and installation of Servo stablizer 3phase oil cooled 12.5kva with high and low cut off 150-200 volts.

Butter fly valves 80mm Make Cim/Castle

Butter fly valves 65mm Make Cim/Castle

Butter fly valves 50mm Make Cim/Castle

Butter fly valves 40mm Make Cim/Castle

Dual plate Non Return Valves 65 mm dia Make Cim/Castle

Dual plate Non Return Valves 40 mm dia Make Cim/Castle

Balancing valves 80mm dia Make Cim/Castle

Balancing valves 40mm dia Make Cim/Castle

Ball valves 40mm dia Make Cim/Castle

Inlet/outlet imported radiator Valves 15 mm Make Cim/Castle

Pressure gauges with cocks and syphon Make Cim/Castle

Automatic air purgers valves Make Cim/Castle

Thermometer 0-90o c

PPR Ball Valves 20 mm

PPR Ball Valves 25 mm

Y Strainers 65 mm dia Make Cim/Castle

Providing and fixing 6 SWG dia G.I. wire on surface of in recess for loop earthing interconnecting main panel and other electrical equipment

national engineering