REPAIRS AND CLEANING OF SERVICE TANK, OVERFLOWS, REPLACEMENT OF OLD/UNSERVICEABLE SERVICE TANKS, WATER SUPPLY PIPES AND SANITARY FITTINGS ETC TO CERTAIN BUILDINGS IN TECH AREA AT AF STN BHUJ

Amount

Taking up or down following size of steel tubing and connections including removal to store for reuse or credit to contractor Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing, where required.

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

S&F CPVC pipes ISI marked with all fittings fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 of plain CPVC)

20mm nominal dia of pipes

25mm nominal dia of pipes

32mm nominal dia of pipes

S&F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following size :-

15mm bore

20mm bore

25mm bore of pipe

Refixing following size of old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.( Note : The rates include for cleaning or rerunning the old screw threads as required)

15mm bore

20mm bore

25mm bore of pipe

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of following sizes

20mm dia bore

25mm dia bore

Supply and fixing Rotational moulded polythelene water storage tank, three layered, ISI marked, cylindrical vertical with closed top including dismantling existing water tank and removingto store of following capacity Complete all as pecified : -

1000 litres capacity

750 litres capacity

500 litres capacity

S&F in repairs 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) Complete all as specified.

S&F in repairs 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) Complete all as specified.

Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks complete all as specified.

All as per item above but of capacity exc 500 liters and n.exc. 1000 liters

All as per item above but of capacity exc 1000 liters and n.exc. 2000 liters

Supply and fixing in repairs tank top cover (lid) white of make : Sintex suitable for any size/capacity including provision for providing brackets with nut and bolts as required for fixing of lids all as specified and directed.

S & F in repairs Bib taps, cast copper alloy with cruty or butter fly handle, screwed down, screwed down, srewed for iron pipe or for brass ferrule an fixed for size 15mm bore,

S & F in repairs stop valve 15mm dia cast chromium plated screwed down high pressure with long shunk screwed end for iron pipe or for unions complete all as specified and directed

ditto as per above item but concealed type

S&F in repairs vitreous china wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets.

S&Fin repair pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed.

S&F of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed

S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws.

S&F Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe)

S&F cast iron 'P' or 'S' traps 100 mm bore of pipe.

S/F grating square 150mm size of PTMT (minimum weight 100 gms )

S&F in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, bll valve, flaot and handle including brackets of 10 Ltr capacity.

M&L for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement .all as directed by Engr-in-charge

M&L for 75mm dia cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4 )

Demolition of cement concrete any description any thickness any position not other wise specified and directed

M&L for cement concrete 100 mm type D2 1:4:8 using 40mm graded aggregate as in hardstanding including nesseccery form work complete all as specified.

M&L for cement concrete 100mm type B1 1:2:4 using 20mm graded aggregate as in hardstanding including nesseccery form work complete all as specified.

Forming dummy joints 65 mm deep X 10 mm wide filled with sealing compound grade 'B'

Taking down cement plaster on brick, PCC block or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing rubbish outside MD land complete all as specified and as directed.

M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces.

M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified.

M&L for new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on ceiling surfaces and applying two coats of white wash by finishing the surfaces even and smooth complete all as specified and directed by EIC.

M&L for new plaster surface wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of wall care Putty by finishing the surfaces even and smooth complete all as specified and directed by EIC.

Complete removal of existing treatment on wall surfaces and applying two coats of distemperwith distemper oil emuision, white or tinted including one coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed by EIC.

M&L for rendering 15mm thick in cement sand mortar 1:4 on fair faces of brick work, PCC block masonry or concrete surfaces, mixed with water proofing compound as per manufacturer's instructions. (Note:- Supply only Integral water proofing compound will be measured and paid seperately)

Supply only integral water proofing compound.

M&L for preparation of new or previously untreated concrete or PCC block masonry external surfaces and applying two coats of exterior emulsion paint (in camouflage pattern as approved by the GE) over a coat of primer all as specified and directed by EIC using any one of following material :- Make Brand Nerolac Suraksha Asian ACE Berger Walmasta

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L for 25mm thick cement concrete type BO 1:2:4 using 12.5mm graded aggregate in floors

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified.

All as per Ser Item No 6 above but in vertical surfaces such as dado, skirtingand riser etc all as directed by the EIC. (NOTE:- Backing coat of CM (1:4) paid seperatelly)

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified.

Glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified.(NOTE:- Backing coat of CM (1:4) paid seperatelly)

M&L for 10 mm thick rendering on vertical surfaces in cement mortar 1:4 as backing coat complete.

M & LCement concrete tiles 20cm x 20cm x 20mm thick, m a c h i n e pressed; set pointed in neat cement slurry in floors, with grey cement and pigments and cut and polished complete all as specified and directed

M& L Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces

M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

M & L Screed bed or bedding layer of mortar 15 mm thick CM (1:4) for laying floor finishes

M & L Providing, cement concrete in roof, pedding on roof Type C-1 (1:3:6) using 20mm graded Aggregate kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

Bhavik Construction

M/s Pal Builders

GOPI CONSTRUCTION

sudarshan builders

GPR Construction Co.

Sanjay Enterprise

Khodiyar Construction