Construction of passage from emergency outside to 500 Bedded Hospital corridor near Radiology Bathroom in Dr R.P. Govt. Medical College Tanda in Distt Kangra (HP) Deposit work

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres (Fifty metres) lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) complete as per direction of Engineer-in- Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and laying cement concrete 1:2:4 (One cement: two sand: four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth,as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 40mm (Forty millimetres) thick cement concrete paver block of M-40 (M-Forty) grade with approved color design and pattern factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Brick work with common burnt clay F.P.S. (Non modular) building bricks of class designation 7.5 (Seven point five) conforming to IS :2222 in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge.

15mm (Fifteen millimetre) thick cement plasters in single coat on rough/fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth witth cement mortar 1:6 (One cement : Six sand) above plinth level to floor all level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge.

Providing and applying white cement based putty of Birla / JK average thickness 1mm (One millimetres) thick, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge.

Finishing walls with 100% (One hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives comple in New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge.

Providing and fixing colour coated / anodised aluminium work for door frame, window, ventilators and glazed partitions frame with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and as per the directions of Engineer-In-Charge including carriage of materials within all leads and lifts and other incidentals.

Providing and fixing colour coated / anodised aluminium work for door, window, ventilators and glazed partitions shutter with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and as per the directions of Engineer-In-Charge including carriage of materials within all leads and lifts and other incidentals. including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing 12mm (Twelve millimetres) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc; with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic With float glass panes of 5.0 mm (Five point zero millimetres) thickness (weight not less than 12.50 kg/ sqm) (Twelve point fifty kilograms/square) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 300x16mm (Three hundred fifty into sixteen millimetres) anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 200xx10mm (Two hundred into ten millimetres) size aluminium tower bolts (barrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 125 mm (One hundred twenty millimetres) aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge With stainless steel cover plate minimum 1.25 mm thickness complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.