Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹16.5 LAccepted-AOC 5 508 509 VRAJ VALENCIA SCIENCE CITY ROAD S G HIGHWAY SOLA AHMEDABAD GUJARAT 390060 | AHMEDABAD | AHMEDABAD | GUJARAT | 390060 | 1 | Accepted-AOC APC | |
| 2 | 2₹17.5 L+₹91,446 (5.51%)Rejected-AOC | 2 | Rejected-AOC NOT ACCEPTED | |
| 3 | Rejected-Technical | - | Rejected-Technical NO REMARK IN WLR AS CIRCULATED BY E-IN-C,S |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BHUJ
GE ARMY BHUJ
REPAIRS TO RCC COLUMN,CHEJJAS,BEAM,CEILING AND OTHER B/R WORKS IN MD/OTM ACCN UNDER AOR OF AGE BR I OF GE (A) BHUJ AT MIL STN BHUJ
2023_MES_596147_1
8118
Open Tender
Civil Works
Item Rate
270 days
ARMY AREA BHUJ
REFER TENDER
6 documents required · 6 mandatory
₹500
GE ARMY BHUJ
₹40,000
Yes
30 Jun 2023
17 May 2023
16 Jun 2023
17 May 2023
14 Jun 2023
2 Jun 2023
Amount
Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.
M&L vitrified ,coloured and printed tiles of size 600 mmx600 mm x 9 to 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and pointed in white or coloured cement to match with the colour of tiles, with all possible design combination as specified by Engr-In-charge complete all as specified and directed.
M&L vitrified ,coloured and printed tiles of width as directed and 9 to 10 mm thick as in skirting fixed over and including 10 mm thick cement backing coat in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles with all possible design combination as specified by Engr-In-charge complete all as specified and directed.
Roughening surfaces of old concrete floor by picking , sweeping cleaning and washing down with water to remove dust etc. Complete all as specified and directed
M&L Coloured Glazed Ceramic tiles (Digital Designer tiles) 300 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 with all possible design combination as specified by Engr-In-charge complete all as specified and directed by Engineer-in-Charge..
M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
Demolition of precast concrete block walling and similar items i.e.. ashlar facing dressed stone work, precast concrete articles etc., of any description and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.
M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.
Demolision of reinforced Concrete of any description and in any position such as column,chejja, beam, slab etc as directed by engr in charge
Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celling etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")
Supply only water proofing compound (ISI Mark)
M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces/stone masonry and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls & applying 2 coat of cement base paint over a coat of alkali resistance primer complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.
Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.
M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.
M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expansion joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.
Dismantling plain or corrugated A/C or steel sheeting, any gauge of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.
Dismantling plain or corrugated A/C or steel sheeting, any gauge of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in ridge etc fixed with L or J hooks all as specified and directed.
Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc. complete all as specified and directed.
S&F Roof trusses (framed) trusses purlins and fastening (etc., angle, channel, tubular section, round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.
M&L foe preparation of new steel surfaces exc 10 cm width or girth and applying two coat synthetic enamel paints on new steel surfaces over a coat of red oxide zinc chrome primer complete all as specified and directed.
Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified.
M&L for false ceiling work of powder coated aluminium ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 4mmx24mmx0.40mm and GI suspenders 8mm dia fixed to ceiling with and including supply and fixing mineral fibres acoustic ceiling board of size 600x600x12mm thick complete all as specified and directed and fixed as per manufacturers instructions including taking down existing ceiling of any description and in any position and making good the disturb surfaces to match with the existing surfaces and finishes complete all as specified and directed.
Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fibber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed.
Excavating in posts holes (or similar holes) in Soft/loose soil each n.exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface.
M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete.
Taking out old existing roof treatment including pvc and Material and labour for water proofing treatment to roof slab by applying one coat of bituminous / polymerised primer confirming to IS 3384 @ 0.30 Ltr /sqm and laying grit finish Acetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester of 3.50 kg / sqm (minimum) and 3mm thick minimum and making side lap of 75 mm and 100 mm end overlaps and inserting inside the parapet walls alround 15 cm to avoid any leakage from the walls and before apply of APP membrane first make surface smooth by pvc 1:2:4 (25mm) thick and plaster 1:4 (10mm )thick and then application of APP membrane ,complete all as specified and directed.
Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins/spring clips and providing and S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each panecomplete all as specified and directed.
Taking down existing wire mesh of any discription and in any position and supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed
M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified & as directed
- Ditto- as above but 6 to 8 mm dia in stirrups
Removal of loose and damaged plaster or cover concrete upto good parent concrete or upto reinforcement level, traces of shoots, grease, oil etc. using impact high frequency hammer/chisel without damaging the existing concrete (if required) and by wire brush (metallic brushes only) including cleaning of existing concrete surface carefully by suitable means. The item including all necessary machinery, scaffolding, Providing erecting the safety net of opening 75mm x 75mm x 12 mm size in addition to sturdy GI corrugated arrester tray to prevent the debris falling on ground during progress of work and keeping the same during the entire period of work, providing a well support tubular steel prop arrangement to support the shell and the terrace slab complete from top to bottom, compressor, coarse sand, cleaning the surface by air jet, disposal of unserviceable materials at a identified location as per specification and instruction of Engineer in charge. (Surface area of the member shall be measured for payment purpose)
Cleaning of reinforcement using wire brush to remove corrosion products, dust, dirt etc. and applying two coats of zinc rich epoxy MasterEmaco P 130 (BASF make) or equivalent treatment complying to BS 4652, type 2 for protection of reinforcement from active corrosion, complete w.r.t material, equipment and labour. The material to be used shall have the following key performance properties: Total zinc content in dry film>84% Mixed density : 2.4=0.1 kg/L Volume soilds : 57=3 Payment shall be as per actual application on surface area of reinforcement at site.
M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/CICO/PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm (average) all as per manufactureres instruction.(Upto 10 m height)
Preparation of old decorated plastered or unplastered surfacesof wall including washing , rubbing down and stopping of distempered surface M&L for applying two coat of distemper oil emulsion paint white or tinted complete all as specified
machine vision plus
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .