Construction of Katapathar water supply scheme

Construction of CWR, Tubewell & laying of Rising Main Pipeline Distribution System and related works complete in Katapathar Water Supply Scheme under Jal Jeevan Mission Program.

1.0 Tube Well (Source) & Related Components - Transportation of Rig Machine, Air compressor O.P. unit camp equipgages, connected T&P & necessary material erequired for drilling up to site of work, including loading, unloading etc. complete.

Erection and leveling of Rig machine and barricading at sire of work

Dismantling of Rig Machine & clearance of site after satisfactory completion of work

Drilling of Borehole from GL to 100 mtr. BGL

Preparing and lowering of Tubewell assembly starting from G.L. to the required depth including cutting, welding as required at site complete with all T&P required. - Supply & lowering of 300mm dia MS ERW fincut 7.9mm thick plain pipe

Supply & lowering of 300mm dia MS ERW fincut 7.9mm thick slotted pipe

Supply & fixing of 300mm dia, 8mm thick tubewell cap.

Supply & fixing of 300mm dia M.S.D. housing clamp and Grider set.

Supply & fixing of 300 mm dia Bail plug.

Supply and Shrouding of Pea gravel in between bore & tubewell assembly to the entire depth of Tubewell

Development of tubewell by 350 PSI/1100 CFM Air compressor

Development of tubewell by the suitable capacity O.P. unit including supply & installation of pumping plant.

Geohydrological survey of site

Chemical & bacteriological testing of water sample

Pump and Related Electrical Items - Supply of Energy Efficient Submersible Pumpsets of various duty parameters, Make KSB - Pump of 450 LPM dischage at 250 m head (TW-1 to CWR-1)

Supply and installation of Dry Auto transformer start ATS type starter cum panel for submersible motors incluing capacitor . For operation on 400 volts+/- 10% three phase 50 c/s AC supply complete with Cu bus bar, internal interconnection and comprising of AUTO TRANSFORMER STARTER, Electronic over load, Single phasing, reverse phasing protection relays and under and under voltage protection,with Metering & Protection calss CT, Time Delayed Capacitor duty contactor operated LT power capacitor, single phase preventor, indicating lamp, door switch with complete internal connection by copper wire & should be suitable toi integrate Multi function power meter for following duties of Pump motors. - (16-40)HP

Pumping Plant accessories for tube wells - Supply, testing, tagging, terminating and jointing of 3 core flat cable with bare bunched copper conductor insulated with PVC and sheathed with PVC for submersible pump motors with Voltage grade upto 1100 V generally confirming to IS 694-2010 with latest amendments of the following size. - 35 Sqmm 3 Core

SITC of Main Incomer panel comprising of TPN MCCB of rating suitable of following rating with Three phase volt meter, Amp. Meter, CT, Mains indicating lamps etc. - 250 Amp

Auto Phase correction unit for following ratings - 110 Amp

Supply, testing, tagging, terminating and jointing of XLPE insulated PVC sheathed cable of 1.1 KV grade with Aluminium conductors armoured as per IS 7098-I including terminations at both ends, testing, commissioning at site as per spcifications, complete in all respects - 70 Sqmm

Earthing of complete electrical equipment (GI Earth strip, GI earth plate etc. including digging of pit & Complete earthing in all respect as per IE rule, IS: 3043, including supplying and laying 25x5mm GI Strip 0.5 meter below ground with standard accessories.

415 V, A' class, non-skid, high voltage insulation synthetic mat mate from electrometric polymer material, 1000mm wide, 2.0 mm thick, Dielectric strength 3300V for 1 minute, fire retardant, no adverse effect of transformer oil , diesel, acis, alkali, High Tensile and Elongation properties, good mechanical strength to withstand load and movement of breaker trolley, as per IS 15652 with latest amendments.

Shock treatment chart, duly laminated in Hindi (Local)- 1NO. And English language- 1N0.

First Aid Box with all essential medicines including wall mounted bracket

415 V, Aluminium, anodised Danger caution plate in Hindi (local) and English languages with the sign of skull and bones in signal red colour on front side, as per IS 2551 with latest amendments.

CO2 type, portable Fire extinguishers, of size 5 Kg each, manufactured from CRCA sheets in all welded construction, body coated with glossy corrosion resistant epoxy powder coating, with inbuilt water proof pressure guage, with wall bracket, as per IS 2190 and IS 13849 with latest amendments.

Supply of jointing materials such as lugs, Tapes etc.

100 mm dia m.s. column Pipe assembly having thickness 7.1 mm both ends flanged complete 150 meter length ( 03 metr length x 25 nos.) painted with 2 coats of anti corrosion bituminous black paint over 1 primer coat

Supply of main Piping and Valves compriging of following

Supply of 100 mm dial Pressure Gauge with control cock & fitting of range 0-10 Kg/Sqcm -01 no.

Supply of following Tools required for maintenance of Pumping plants.

Installation & Commisioning of Pumping Plants with accessories in side the Pump House but without Civil Works Such as laying of foundation, Cable Trench etc.

Testing of Pumping Plants at Site

Painting of entire installation with 02 coats of anti corrosion bituminous black paint over 1 primer coat Super Enamal Paint as per direction of Engineer Incharge

Industrial Grade electrification of Pump House and Pump House Camps with Copper wiring in UPVC conduit.

Supply & Installation of elecronically controlled, electrically actuated,diaphragm operated, chemical metering pump, wall mounting suitable for delivering up to 6 litres of chemical solution/sodium hypochlorite solution per hour under maximum delivery pressure up to 6.0 KG/cm2 and suction lift not less than 1.5 meter with accessories.

IOT Based Monitoring System including all Pressure Sensor, Mechanical flow Meter Sensor,Chlorine Sensor with all including accessories.

Civil Work - Supply of all Materials, Labours, T&P etc. and construct a New Pump House with size (3.60 m x 3.0 m) as per design and drawings, including cost of all Labour & Fittings all complete.

Provide all Materials, Labour, T & P etc and Construct Boundary Wall 2.00 m Height & Iron Grill Over it, All Round the Tube Well & O.H.T Campus to prevent the approach of unauthorised souls.

Provide all Materials, Labour, T & P etc and construct 3.60 m Wide Entrance Gate with Gate Pillars for controlling approach to the area.

Dismantling of flexible pavements and disposal of dismantled materials upto alead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 (Considering 100%)

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately (Considering 30%)

Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383,maximum size ofcoarse aggregate notexceeding 25 mm,mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

Excavation in Pipe Line Trenches - Excavation in ordinary soil (loam, clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation trenches or in to the plinth (75% of Total Quantity)

Excavation in soil mixed with shingle bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling,waterring and ramming of Excavated earth in the trenches.(25% of Total Quantity)

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.- G.I. PIPE CONFORMING TO IS : 1239(PART-1) - 100 mm

Supplying of Non Return Valves Including Carting the same upto the site of workas per engineering norms anywhere in uttarakhand.- C.I. Non Return Valve - Pressure PN 1.0 - 100 mm dia

Supplying of Air Valves as per engineering norms of approved quality with bolts, nuts, rubber insertions etc. complete anywhere in uttarakhand - C.I. Air Valve (Screwed) - 20 mm Diameter

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Supply,Installation,Testing and Commissioning of Full Bore Electromagnetic Flow Meter for Lines of followoing Sizes Comprising of Flow Tube Sensor with Transmitter cum Display unit and facility to provide data communication signal over Modbus 485 Port Pulse output and 4-20mA Signal output with Flanges, Clamps etc.- At Source - 100 mm

Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside the tank and alluminium ladder inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator,supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2. - CWR of 5 KL (Harijan Basti)

Repair of Existing CWR (50 KL)

Demolish Existing (Stone MasonaryCWR-5 KL) Harijan Basti

CWR of 100 KL

CWR PROTECTION WORK - Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)-GI wire 10 gauge BWG

Construction of RCC Pillar For Supporting of Pipes

4.0 Distribution Network & Related Components - Dismantling of flexible pavements and disposal ofdismantled materialsupto alead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 (Considering 50%)

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately (Considering 50%)

Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383,maximum size ofcoarse aggregate notexceeding 25 mm,mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

Excavation in Pipe Line Trenches - Excavation in ordinary soil (loam, clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation trenches or in to the plinth (75% of Total Quantity)

Excavation in soil mixed with shingle bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling,waterring and ramming of Excavated earth in the trenches.(25% of Total Quantity)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.G.I. PIPE CONFORMING TO IS : 1239(PART-1) Medium Duty (Class 'B') - 15 mm dia G.I Pipe

20 mm dia G.I Pipe

25 mm dia G.I Pipe

32 mm dia G.I Pipe

40 mm dia G.I Pipe

50 mm dia G.I Pipe

65 mm dia

80 mm dia

Supplying of Brass/G.M. Sluice Valves Including Carting the same upto the site of work as per engineering norms (with cap) complete with bolts, nuts, rubber insertions etc. anywhere in uttarakhand.- Brass/G.M. Valve - 65 mm dia

80 mm dia

Supplying of Air Valves as per engineering norms of approved quality with bolts, nuts, rubber insertions etc. complete anywhere in uttarakhand - C.I. Air Valve (Screwed) - 20 mm Diameter

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Supply of dry dial,Woltman type,Magnetically coupled class-B tamper proof Bulk Water Meters with removable mechanism ,megnetic drive,hermetically scaled ,pre-equipped for remote reading as per IS:2373-1981 and ISO:4064 standard with EEC/MID certification mark shall be with protection class of IP68 for wireless AMR water meter with guarantee/warranty of following sizes along with strainer. - At Outlet of CWR - 80 mm dia

Interconnection of new pipe line to existing pipe line including necessary cutting, supply and Installation of required specials fittings all as per direction of Engineer-In- Charge. - 15-25

Supply of all labour, material required for restoring of New house connection which might be damage during excavation and also shifting all existing connection to new water supply system from existing water supply system complete as per unit estimate and directed by Engineer in-charge. 15 mm size water connections.(as per Required)

Providing and making house service connections from water supply distribution GI pipe line upto water meter chamber inside the property using GI pipe including supply and fixing of electrofussion saddle ,brass ferrules elbow, ball valve etc complete with earthwork, road cutting with restoration works

Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube osts/horizontal members/ bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m.

O&M for trial and testing of pipe.

Testing of Pipe (GI, HDPE & DI pipe) which includes a) Parameters (Physical & Chemical) b) Tensile Strength Properties