Construction of Compound Wall, Security Cabin and Main Gate at DNC Station SIRVA

Amount

Jungle clearance including uprooting of rank ,vegitation ,grass,brush wood, sapling and tree not exceeding 30 cm grith including disposing the debris within a lead of 50m . Supply of all labour, materials ,tools and plants etc. complete.

Dismantling & removing G I barbed wire from RCC fencing post including roll and stacking with 50 mtr lead, Including cost of all tools,material,plant labour etc, complete.

Dismantling & Removing of old R.C.C Fencing post and Stacking with 50Mtr lead from all type earth work and dismantling of concrete etc, Including cost of all tools,material,plant labour etc complete, in base old R.C.C post.

Dismantling of Stone rubble masonary manully /by mechanical means including Stacking serviceable material and disposal of unserviceablie materials within 50mertes lead as per direction of Engineer-in -charge in cement morta, Including cost of all tools,material,plant labour etc. complete

Earthwork in excavation in trenches for foundation in all types of soils not exceding 1.50 m in width not exceding 10 Sqm on plan including dressing of sides and ramming of bottom, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed with in a lead of 100m including the cost of all labours,tools and plants etc., complete. Back filling the same after the masonry / concrete work is completed including the cost of tools & plants, materials, labours etc. complete.

All Kind of Soil

Providing and laying Plain cement concrete in 1:3:6 (1Cement : 3 Course sand : 6 graded stone aggregate) 40 mm nominal size of approved quality of materials including mixing , laying, Scaffolding,Compacting and Curing etc., including the cost all materials, tools & plants, labours etc. complete.

Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Providing and laying Reinfocement TMT steel of approved quality ( SAIL / VIZAK / TATA / TISCON ) including the cost of all materials, labours, tools & plants, cutting, bending binding , placing in position steel reinforcement as per drawing and as directed including cost of binding wire etc., complete.Thermo-Mechanically Treated bars of grade Fe-500D or more

Construction of Brick/C.C block masonry with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep : 6 coarse sand).complete in cement mortar 1:6 (1 cement: 6 Sand)

Plastering to CC Block masonry with cement mortar (1 : 4 ) ( 1 cement : 4 sand ) and rackingout joints as directed, including the cost of all materials, labours, tools & plants, scaffolding curing etc., complete.

Providing 18mm thick cement plaster in single coat on fair side of brick concrete walls

Providing 12mm thick cement plaster in single coat on fair side of brick concrete walls

Apex ultima two coats over a coat of primer of approved brand and manufacturer and of approved colour on new wall surfaces to give an even shade after throughly brushing the surface free from mortar droppings and other foregin matter,cleaning and also including preparing the surface even sand papered smooth including supply of all materials,tools & plants,labour and all other charges etc., complete.

Providing & applying white cement based putty of average thicness 1mm ,of approved brand ( birla white/JK Cement) or any approved brand and manufuctures over the plastered wall surface to preper the surface even and good for smooth with applying putty over one coat primer of Inspection Quarter with approved brand after preparing the surface good for applying the primer as directed & as described as per condition at site including the cost of all materials, labours, tools & plants , scaffolding etc., complete.

Applying two coats of Distempering on the inside painted wall surfaces with oil bound washable distemper of approved quality (Berger / Asian brand or equivalent of 1st quality) & colour , even shade with a coat of primer wherever required at all heights and as directed & as described as per condition at site after cleaning and preparing the surface good for distempering including the cost of all materials ,labour ,tools & plants , scaffolding etc., complete.

Filling the available Morrum inside the plinth & foundation and as directed in depth consolidating each deposited layers by ramming and watering, lead up to 50m and in all heights including the cost of labours, tools & plants and all other charges etc complete as directed.

Filling the available Sand inside the plinth & foundation and as directed in depth consolidating each deposited layers by ramming and watering, lead up to 50m and in all heights including the cost of labours, tools & plants and all other charges etc complete as directed.

Providing & laying 1st quality ceramic-vetrified floor/skirting tiles of size 600x600x10mm thickness for flooring of approved make like NITCO, Orient, Somany, Kajaria ,bell etc.Conforming to IS of apprved colours as white,ivory,grey,fume red brown laid on 20mm thick bed cement mortar( CM) 1:4 for foor tiles and 12mm thick bed of cement mortar( CM) 1:3 ( 1 cement : 3 coarse sand) for dado tiles, Including jointing with white cement mixed with pigment of of matching shade complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete

Providing & laying prepolished granite stone on the old flooring 20mm(ovg) thick of approved quality & colour laid over a bed of CM 1:3 (1 cement: 3 River sand) of thickness 20mm(avg) pointing with white cement slurry after removal of existing floring including the cost of Replastering in CM 1:3, rubbing, polishing, washing, cutting, laying, fixing, leveling, maintaining gradient jointing, after removing the old flooring & preparing the surface fof providing granient jointing, after removing the old flooring & preparing the surface for providing granite stone etc. as directed & as described as per condition at site including the cost of all materials, labours tools & plants and all other charges etc. complete.

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in-charge and panelling with panels, as directed & as described as per condition at site including the cost of all materials, labours tools & plants and all other charges etc. complete.

Providing and fixing window having extruded alluminium colour power coated section frame main outer size 63.50X38.10X1.95 mm (jindal Section No.4605 @ wt 1.094 kg/Rmt) horizontal Two Track member size 61.85mm X31.75mm X1.20mm (of Jindal section No. 8758 @ Wt. 0.659 Kg/ mt) with sliding shutters of Horizontal member size 40mm X18mm X1.29 mm(of Jindal section No.8949 @wt. of 0.456 kg./mt) vertical member of size 40mm X18mm X1.29 mm( of Jindal section No. 8947 @wt.of 0.456 kg/mt,/ section 8948 @Wt.bronze colour tinted float glass with powder coated alluminium fitting and fixtures and transparent silicon sealant glass fixing to frames as per detail etc.

Fram main member (63.50x38.10x1.95mm)

Shutter (40mmx18mmx1.29mm)

float glass panes 5.50mmthicness

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (15 mm nominal bore)

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.

Supplying & fixing mirror with frame of approved size & make with all nessassary fittings like brackets, of approved quality as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 including 500x450 mm pre cast directed including curing, cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Construction of Soak Pit as per drawing and as directed including curing, cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Sewage Pipe Line

Rain Water Line

Providing and placing on terrace polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Construction of Septic Tank as per drawing and as directed including curing, cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing & fixing of Glass pieces at top of compound wall with CM 1:4 including material of glass, broken, fixing in good postion including all labour, tools, plant, material, transpotation etc. completed

Providing and Fixing main gate with new GI pipe main & wicket gate as per approved drawing with heavy duty ' C' Class GI pipe of 50 mm dia for frame & with heavy duty ' C' Class GI pipe of 20 mm dia for verticals includinghold fasts, fixing in walls,hinges, GI clamps,welding/threading etc., and painting of pump house gate with S.E.paint two or more coats over a coat of primer of approved 1st qualty, brand, manufacture, colour, to give an even shade and as directed & as described as per condition at site including the cost of all materials, labours, tools , plants,scaffolding and all other charges etc. complete.(As per drawing ) including the cost of all materials, labour, tools & plants.etc complete.

Providing and fixing M.S. shine board of size 5mtx2.5mt making with Ms angle and flat as per direction and design and fixing it in proper position with proper foundation as per drawing writing the letter as per direction with rediuam. Supply of all labour ,materials, tools and plants and all other charges etc complete.

Providing and Fixing of PVC pipe weep hole 75mm dia Heavy duty as per drawing and as directed at site including cost of all materials, labours, tools & plants etc., complete.

Providing & Fixing granite plaque 20mm thick (Size 8'9" X 4'00" )with engraving letter/emblemes including cost of all materials, labours, tools & plants, levelling, polishing etc and other charges complete. (Gujarati,Hindi & English)

RAVIRAJ CONSTRUCTION

chad hamir kanji

Shivam Construction