Construction of Generator Room (Power-House) at Rawalpir VTS/LH Station.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed.

Ordinary rock

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :

Dry stone packing under foundation using soling stone of approved quality and size including properly hand packed, filling interstices with local sand /moorum and consolidating with hand rammers to the required compaction including spreading, watering and mixing binding materials, earth or moorum etc including the cost of all materials, labours, tools and plants and all other charges etc complete as directed.

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) in position for all works up to plinth level including batching, mixing, laying, compacting in layers with rammer and as directed, curing & cost of centring and shuttering, supply of all materials, labours, tools & plants and all other charges etc. complete.

Supplying and filling in plinth with moorum under floors, including watering, ramming, consolidating and dressing complete.

Supplying and filling in plinth with river sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying R.C.C. 1:1½:3 (1Cement: 1½ River sand: 3 stone aggregate of 20 mm nominal size) for R.C.C. work of building upto floor 2 level including batching, mixing, laying, compacting ,cost of centering, shuttering, finishing to the exposed faces with10 mm thick plaster in C.M 1:3 (1Cement: 3 River sand) cost of supply of all materials, labours, tools & plants, curing & all other charges etc. complete..

Foundation -Grade beam/Grade slab/Footings

Column /Lintel

Chajja/Roof beam projection

Roof Slab

Supplying & placing TMT steel( TATA/SAIL/VIZAG) reinforcement of approved 1st quality in position for R.C.C. work including straightening, cutting, bending, fixing and binding with approved 1st quality binding wire as per drawings & as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Construction of C.C block masonry wall & pillar in superstructure of buildings upto ground level in cement mortar of mix 1:4 (1 cement: 5 river sand) with approved size, shape & quality of bella stone as directed including cost of supply of all labours, materials, tools & plants, scaffolding and all other charges etc. complete.

Construction of C.C block masonry wall & pillar in superstructure of buildings upto floor 2 level in cement mortar of mix 1:4 (1cement: 4 river sand) with approved size (380mmx230mmx200 mm with CC1:3:6), as directed including cost of supply of all labours, materials, tools & plants, scaffolding and all other charges etc. complete.

Providing 15mm thick cement plaster in single coat on fair side of brick concrete walls for interior plastering upto floor two lwvel and finished even and smooth in cement morter 1:4 ( 1 cement ,4 sand ) including finishing with with a floating coat of neat cement slurry for plastering and fixing ( inner and external side) hexagonal GI chiken wire mesh of 24 gauge required size with nails /cement at junction of concrete and brick work or between different matrrials etc. including scaffolding at all floors/all levels/at all height/all shapes etc complete as per specification and direction of Engineer-in-charge.

Celling plaster 12mm thick in CM 1:3 (1Cement:3 fine sand)

Providing and laying plinth protection all around the building as per direction including earth cutting , laying stone packing and laying cement concrete 1:2:4with neat cement finish. Supply of all labour , materials, tools and plaants etc complete.

Providing and fixing 10mm thick of full body vetrified tiles in various finish of 600mmx600mm size ( Swastika/Marbito or their equivalent) as per details ,in floor of approved make and of approved colour of first quality, even shade, set in cement slurry over minimum 50mm thick cement morter 1:3 laid to proper slope,line and level, as specified including using white cement with or without colour mixing as per shade of approved quality in pointing of joints also joint fill with acrylic grout filler and applying neat cement paste about 3kg per sqm, curing and cleaning complete as directed by engineer-in-charge. No extra payment pay for architectural design.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in all colours, shades, except White, Ivory, Rey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4(1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed (300mmx450mm)wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade area of slab over 0.50 sqm

Marble stone slabs 18 mm thick marble stone as per sample of marble in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing 35 mm thick factory made laminated veneer plumber door/cup bord shutter conforming to IS : 14616 and TADS 15:2001 fixing with necessarey(1No.Hinges-50mm,4No.Brasshinges-100mm,2No.Aldrop-250mm&230mm,2No.Handle-125mm)

25mm Thick cupbord and TV Cabinet with necesarry screw

Providing and fixing glazed shutters(30mm thk) for windows and clerestory windows using 4 mm thick float glass panes including ISI marked necessary screws(2No.Hinges-50mm,6No.Brasshinges-100mm,2No.I-hook-250mm&230mm,2No.Handle-100mm).

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Providing and fiximg of fly proof teck wood shutter of size (75mmx30mm thick ) with shine Gobin jalli of window shutter with approved 1st quality,brand of netlon jalli and fixed with teak wood beading of approved 1st quality,brand and necessary brass screws, nails etc. as directed at site including cost of all materials, labours, disposal of the debris within a lead of 50mtr, tools and plants and all other charges etc. complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : ( Apex)New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Providning and appyling white cement based putty of average thickness 1mm aprroved brand and manufacture over the plaster surface to prepared the surface even and smooth complted

Distempering with oil bound washable distemper(Asian) of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer.

Painting 2 coats with one coat primer to the door / window / cupboard / ventilator with S.E. paint(Berger)of approved first quality, brand and colour paint, cleaning & preparing the surface properly & then cleaning the painting spots on the floors,furnitures, etc of the building all heightsl and placing of all the items in existing position as directed including supply of all materials, labours, tools & plants, scaffolding, and all other charges etc. complete

100 mm mortice latch lock with 6 liver and a pair of handle

Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 including 500x450 mm pre cast directed including curing, cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Construction of Septic Tank as per drawing and as directed including curing, cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Construction of Soak Pit as per drawing and as directed including curing, cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.

Providing & laying 20mm dia "C" PVC/Finolex (heavy duty) - 25 kgf /Sq.cm

Providing & laying 25 mm dia "C" PVC/Finolex (heavy duty) - 25 kgf /Sq.cm

Providing & Laying 32 mm dia"C" PVC/Finolex pipes (Heavy duty)- 25 kgf /Sq.cm

Providing & laying 40 mm dia "C" PVC/Finolex (heavy duty) - 25 kgf /Sq.cm

Supplying & placing pvc water tank of approved make Syntex or equivalent 500 Ltr capacity at the roof of the building & making its connection with pipe line as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete

Supplying & fixing following items of water supply as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete

20mm Brass Bib cock (APR-ESS-101037 Bib cock with Flange)

20mm jaquar Shower arm with nose(ALE-536A,EOS-542A7 & APR-ESS-101055K)

20mm Single lever Basin mixer &geyser points of approved qualityconferming to IS:8931

20mm Angle valve (MQT-526-ESS- Basin inlet connection- Concealed with wall flange)

20mm (APR-ESS-101053 Angular stop cock with wall flange &ALE-547 Jet Spray with 1meter pvc tube SS))

20mmConcealed Stop Cock for water heater(APR-ESS-101069-ESS)

25mm Brass(DLX-551-Flush Cock with wall flange lever handle )

25mm Brass wheel valve (Jaquar-ESS)

32mm Brass wheel valve (Jaquar-ESS)

40mm Brass wheel valve (Jaquar-ESS)

25mm Brass float valve (Jaquar-ESS)

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

Supplying & laying 100/150 mm dia PVC. Sewer/rain water pipe ( Finolex)line of approved quality including required excavation, laying and joining the pipes in proper gradient,bed concrete etc with all nessassary fittings as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Supplying & fixing of 100 mm dia PVC vent pipe with cowl inclu. fixing with clamps as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Provid and fixing White vitereous china wash basin size 630x450mm with a pair of 15mm C.P Brass pillar trapand cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

Supplying & fixing mirror with frame of approved size & make with all nessassary fittings like brackets, of approved quality as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.

Supplying & fixing CP Brass cloth wall hanger/Robe Hook Double coat Hook of approved size & make with all nessassary fittings of approved quality fixed as directed in masonry wall. Supply of all materials, labours, tools & plants and all other charges etc. complete.

CP Brass cloth wall hanger/Robe Hook with wooden base (Jaquar-ESS make AEC-1191 -2x2x3=12)

CP Brass cloth wall hanger/ Double coat Hook with wooden base (Jaquar-ESS make -AEC-1161-2x2x2 = 8)

CP Brass Toilet paper holder (Jaquar-ESS make -AEC-1151)

Supplying & fixing CI Manhole cover of approved size & make with all nessassary fittings of approved quality fixed as directed, Supply of all materials, labours, tools & plants and all other charges etc. complete.

300mmx300mm cover with frame

600mmx455mm cover with frame

Supplying and Fixing of M.S.Rolling shutter /with bearing ball of approved size and made MS laths interlocked toghter entire lenght and jointed toghter at th end by locked inclunding materials, labours, tools & plants, Cutting , bending, welding lock ,alldrop ,hinges ,fixing in position etc.and applying two coats of SE painting over primer coat etc., complete.

Providing and fixing crompton greef mono block pump mini extra with ISI Marked inclunding pump cover, starter switch, main switch, foot valve ect of approved quality and make fixing in position with foundation ballin line and level includng provinding inlet and outlent aggarment etc inclunding materials, labours, tools & plants, Cutting , bending, welding lock ,alldrop ,hinges ,fixing in position etc.and applying two coats of SE painting over primer coat etc., complete.

Electrical Work

1400mm Sweep Energy saver ceiling fan with double ball bearing, motor, blades, down rod, canopy, Capacitor etc. as required, Make: Havells/Crompton

18W LED T-5 pre-wired compact Tube light fixture complete with all accessories, Make: Havells/Cromton make

Heavy duty Exhaust fan of 300mm sweep complete suitable for operation on 230V, 50Hz single phase AC supply with all accessories such as motor, Blades, capacitor etc. complete set

12W (Surface light) Pre-wired compact LED Light fixture, complete set, Make: Havells/Compton/Philips/Syska

18 way metal box, Make: Havells/Anchore

16 way metal box, Make: Havells/Anchore

12 way metal box, Make: Havells/ Anchore

4 way metal box, Make: Havells/Anchore

6 way metal box, Make: Havells/Anchore

12 way MCB Box, Make: Havells/Anhore

32A Doubel Pole MCB, Make: Havells

20A Single Pole MCB, Make: Havells

16A Single Pole MCBN, Make: Havells

1.5Sq.mm FRLS PVC multistrand insulated copper wire/1.1KV grade Make: Finolex(Red and Black)

2.5Sq.mm FRLS PVC multistrand insulated copper wire/1.1KV grade Make: Finolex(Red and Black)

Angle Holder, Make: Anchore

Ceiling Rose, Make: Anchore

Fan ceiling round plate (fan chakkar)

Round base, Make: Anchor

18 Way plate, Make: Anchore Roma

12 Way Plate, Make: Anchore Roma

16 Way Plate, Make: Anchore Roma

4 Way Plate, Make: Anchore Roma

6 Way Plate, Make: Acnhore Roma

10A Plug, Make: Anchore Roma

10A Switch, Make: Anchore Roma

Fan Regulator(Dimmer), Make: Anchore Roma

20A Plug, Make: Anchore Roma

20A Switch, Make: Anchore Roma

Blank Plate

Fan Box with Hook complete set, Make: Anchore

25mm medium class PVC pipe complete length of pipe, Make: Anchore/Precesion

25mm medium class PVC Bend, Make: Anchore/Precesion

25mm Deep Junction box, Make: Anchore

PVC Insulation tape, Make: Steel Grip/Anchore

25W Pre-wired compact LED fixture, complete with all accessories. (Street Light), Make: Philips/Crompton/ Havells/Syska

GI Pipe stand for fixing the 25W LED street light on wall with GI clamping

PVC Junction, Make: Anchore

Screw and PVC Grip

Installation. Testing and commissioning of ceiling fan including wiring the down rod of standard length(up to 30cm) with 1.5Sq.mm, FRLS PVC insulated copper conductor, single core cable etc as required

Installation. Testing and commissioning of exhaust fan in the existing opening

Installation. Testing and commissioning of T-5 LED tube fixture

Installation. Testing and commissioning of 25W LED Street light.

Wiring for light point, fan point, exhaust fan point etc. Point charges

Earthing for power House: Complete Earthing with copper plate Size: 600x600x3mm with brazing of 25x3mm copper strip on copper plate (Length of 25x3mm copper tape: (12mtr)9.132Kg) and providing masonry encloser with cast iron cover plate size: 12”x12” having locking arrangement and water pipe 2.7meter long etc. with charcoal, salt including masonry work.

Transportation, loading, unloading and shifting charges of material at the site

19mm white sunmica with plywood panel sheet size: 4’ x 5’ along with 50x50mm MS angle bracket (black colour) for fixation of plywood panel sheet in power house.

ISI standard, Reputed brand 200A Bus Bar with Box

RYB indicator along with box

4 Pole ELCB 63A along with MCB Box, Schneider/Legrand/Havells make

4 Pole MCB 40A along with MCB Box, Scheider/Legrand/Havells make

8 way MCB Distribution Box, DBOX x SPN DG, Size1200 x 1140mm

6A SP MCB, Scheider/Legrand/Havells make

16A DP MCB Scheider/Legrand/Havells Make

4 Pole Change over 63A MCB with MCB encloser Scheider/ Legrand/Havells make

32A Double pole MCB with MCB encloser

Installation, testing and fixation of accessories S.NO.47 to 56 in Power house

Sardar Construction

Maruti Abhiyantriki