REPAIRS TO JOINERY, PLUMBING FANCING, TEMPORARY SHED, COMPOUND WALL, JAFRI WALLS, HARDSTANDING AND OTHER MISC WORKS UNDER AGE BR-1 AT MIL STN BHUJ

Amount

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and M&L vitrified ,coloured light shade and printed tiles of area not exceeding 0.36sqm , 9 to 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and pointed in white or coloured cement to match with the colour of tiles, with all possible design combination as specified by Engr-In-charge complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and M&L vitrified ,coloured and printed light shade tiles of width as directed and 9 to 10 mm thick as in skirting fixed over and including 10 mm thick cement backing coat in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles with all possible design combination as specified by Engr-In-chargecomplete all as specified and directed.

Roughning sufaces of old concrete floor by picking , sweeping cleaning and washing down with water to remove dust etc. complete all as specified and directed

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and M&L Coloured Glazed Ceramic tiles (Digital Designer tiles) 300 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 with all possible design combination as specified by Engr-In-charge complete all as specified and directed

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F non skid ceramic joint free coloured matt finish tiles square / rectangular area of each tile exc 0.06 sqm but not exc 0.11 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in CM 1:6 and 2nd ( top ) layer of 5 mm thick rendering in CM 1:4( top layer mixed with water proofing compound as per manufacturer's instructions) finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

Supply only water proofing compound (ISI Mark) complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement and including preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint over a coat of alkaliy resistant primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S & F in repairs Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S & F in repairs Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S&F in repair Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store

Taking down chowkats or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store

Taking down existing shutters of any description and in any position exceeding 1.00 sqm but not exceeding 2 sqm each leaf complete all as specified and directed

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-C (20mm), 3track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.Note : Making all edges i.e. cill and jamb good by cement mortar 1:3 complete all as specified and directed

M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specified and directed

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed

S & F for anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminted particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam both side colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required complete all as specified and directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm one side prelam colour PVC sheet reinforced with MS square tube all as per specifications and as per drawing shown on SSR part II complete all as specified and directed.

S&F 100 mm long butt hinges stainless steel medium weight and fixed to wooden or PVC frame fixed in repairs by stainless steel screw complete all as specified and directed.

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed.

S&F in repair Vitreous China, wash down water closet pan "Pedestal pattern" white including P TRAP OR S TRAP and connection to drain and to flush pipe(flushing cistern include) and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified.

S&F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc(including flushing cistern and flush pipe) complete with provision of lime concrete bedding including taking down existing unserviceable WC of any discription and in any position & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified

S&F in repair PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .

S&F in repair Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified

S&F (concealed / open) 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 15mm bore.

S&F (concealed / open) 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 20mm bore.

Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fiber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing at site on as per specification and drawing comlete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling (At the spacing of 1 feet centre to centre) inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L applying one coat of white wash , complete all as specified and directed.

Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated surface ofwall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L for applying one coat of cement base paint including watering and curing of surface adeqautely before and after application of cement base paint complete all as specified and directed.

Preparation of old decorated plastered or unplastered surfacesof wall including washing , rubbing down and stopping of distempered surface M&L for applying one coat of distemper oil emulsion paint white or tinted complete all as specified and directed.

Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of exiting treatment from external wall preparation of old plastered surface and two coat of premium acrylic exterior anti algal fungal emulsion paint on wall complete all as specified and directed.

S&F in repair stainless steel grating 150 x150mm size over floor trap anti cockros all as approved sample complete all as specified and directed.

S&F pillar taps in repair of cast copper alloy with capstan heads fancy type chromium plated screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type complete all as specified and directed.

S&F pillar taps in repair of cast copper alloy with swan neck chromium plated screwed down high pressure with long crutch handle , screwed for iron pipe, 15mm bore fancy type complete all as specified and directed.

M & L for mild steel roof trusses (framed) trusses purlins and fastening (etc.,angle, channel) or flat section including distance pieces, MS plates / gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 quality A also fastening and fixing and including applying one coats of coat of primer alround before fixing in position complete all as specified and directed.

Dismantling plain or corrugated A C or steel sheeting any guage, of any description and in any position as in roof coverings and pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roofing, self drilling and self tapping screws complete all as specified.

Dismantling plain or corrugated A C or steel sheeting any guage of any description and in any position as in roof coverings and S&F pre-painted galvalume aluminium zinc coating plain steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/caldings/ridges, hips, valley gutters, drip and straight flashings cut to length & bent to shape required, fixed using hot dip galvanised, self drilling and self tapping screws complete all as specified.

M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick,with grey cement and pigment set jointed and pointed in cement slurry in floors with grey cement and pigments including 15mm thick screed bed in CM 1:6 complete all as directed

S & F 60 mm thick, machine made, Ist quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles of triangular / zigzag / hexagonal / I in shape or shape and designe as approved with grey cement and pigment conforming to IS-15658-2006, M-35 grade laid over and including 25 mm thick sand cushioning and the voids shall also be filled with fine sand complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as 75mm thick finished fair all as speificed

M &L providing precast cement concrete louvres and jallies 35 mm thick with type B1 (1:2:4) set in cement mortar 1:4 and fixed in precast pillar with groove, including all moulding all as specified and directed

Taking out existing old kerb stones and M&L for factory made precast machine pressed kerd stones of PCC grade M-15 design mix and of shape and size rected, set jointed and pointed cement and sand mortar 1:4 fixed in repairs with and including necessary excavation and earthwork and making good the disturbed surfaces to match with the existing surfaces including removal of dispodal of rubbish complete all as specified and directed. Sizes shall be as under :- Length (L) not less than 300mm, Height (H) 300mm to 350mm, Thickness (T) 100mm and radius (R) 75mm.

Excavating in posts holes (or similar holes) in hard / dense soil each not exc 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm thick each layer watering, and removing surplus soil to a distance not exc 50 mtr away and making good the surface complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundations, fillings and mass concrete etc complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in foundations, fillings and mass concrete etc complete all as specified and as directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F PVC coated Chain link fencing of mesh size 100 mm x 100 mm , diameter of wire not less than 3.4 mm and weight not less than 1.43 Kg / Sqm complete all as specified and directed.

M & L for MS bars 10 mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking endss and binding with MS wire 0.9 mm dia annealed all as specified confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) complete all as specified and as directed.

M & L for Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, ach screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm and not exc 22.5 cm long complete all as specified and as directed.

M & L for preparation of new undecorated steel surfaces of any description and in any position not exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for galvenised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts including securing and tying at crossings with and provisions of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Taking down barbed wire any specification and removing from site complete all as specified and directed.

Dismantling fencing wire mesh, any type and removing from site complete all as specified and directed.

Dismantling structural steel work of any description not otherwise described for complete all as specified and direted.

M & L for preparation of new undecorated steel surfaces of any description and in any position exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and direted.

Excavation in trenches in hard /dense soil not exceeting 1.5 Mtr wide and not exceding 1.5 Mtr in depth and getting out for taking out / laying of cables, erection of poles / strut / stays etc and not exceeding 10 sqm on plan complete all as specified and directed.

Returning, filling in the any type of soil including spreading, levelling, watering and ramming in layers not exc. 25 cms complete all as specified and directed.

Removing excavated material of any type of soil not exceeding 50 Mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

machine vision plus

Ram J. Laljani

Sanjay Enterprise