Replacement and re-alignment of water supply pipelines and UGD gaps to cross roads opposite saibaba temple in Radha nagar 63rd Division

Manufacture, supply,& delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. (Supply up to 90 mm dia in coil & above 90 mm dia straight length in 6 M.) for 110mm dia. MAT- 07265

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For Pipe Ends Long Neck. 110 mm dia

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For M.S. Flanges. 110 mm dia

Manufacture ,Supply, Delivery of HDPE Speciales suitable to HDPE pipes PE 100 grade PN.10 (6Kg2) including transportation to any where in AP, but excluding Excise duty, Sale Tax and cost of specials etc. complete as per specification. For HDPE TEE 110mm dia MAT-07546

Supply and delivery of CID joints with drilled holes and with rubber rings, bolts and nuts etc., complete with suitable for above AC pipes of class 10 as per ISS Specification No. 8794/88 as amended from time to time including revision. For 100mm dia Class-5

Manufacture, Supply and Delivery of Cast Iron Pipes and Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties. MAT-07982

Providing Jack hammer on hire basis including all charges as per the ditections of the departmental authorities. LAB-00351

Cutting of C.C. Road surface including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.

Earth work excavation and depositing on bank with an initial lead of 50 Mts and lift of 3 Mts in loamy and clayey soils like black cotton soils, red earth and ordinary gravel as per SS 20-B. For pipe line trench

Supply and delivery of quarry dust from approved quarry including cost and conveyance of all materials and labour charges for stacking at site to departmental guage, spreading, sectioning, seignorage, watering etc., complete as per specification.

Laying and jointing of HDPE pipes by butt fusion welding as per IS: 7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure complete as directed by the departmental authorities.

Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) For 100mm dia

Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) For 80mm dia

Providing inter connection between to the existing pipe line and newly laid AC pipe line including of all necessary inter connection materials and washers and man mazdoors etc.,etc., complete as directed by the departmental authorities. below 225mm dia

Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities.

Conveyance of excavated earth with an average lead of 2 Km including loading, unloading, spreading and stocking etc. complete

Construction of circular manholes with a slope of 30mm to 50mm in the channel along with sewer lines as per the approved departmental drawings including cutting of C.C/B.T/WBM, earth work excavation and laying of C.C M10 bed with 40mm H.B.G. metal, brick work with C.M. (1:3) for Manhole using 2nd class best quality.The rate includes plastering with C.M(1:3) 20mm thick both inside and out side and smooth finishing of Sewer channel, providing top coping 150mm thick with R.C.C M30 Design Mix using 400Kgs of Cement/Cum including supply and fixing of 35 H.D Manhole cover as per BIS:12592 (Part 1&2) with frame and encapsulated plastic steps including cost and conveyance of all materials, including cost and fabrication of steel used in R.C.C coping as per S.S. including benching, channeling, finishing and refilling with excavated earth and conveyance of surplus earth etc., complete as per S.S and as directed by the departmental authorities for finished item of work. (APDSS NO.1325) For Circular Manhole 0.60m deep ( Up to 0.75m deep)

Construction of circular manholes with a slope of 30mm to 50mm in the channel along with sewer lines as per the approved departmental drawings including cutting of C.C/B.T/WBM, earth work excavation and laying of C.C M10 bed with 40mm H.B.G. metal, brick work with C.M. (1:3) for Manhole using 2nd class best quality.The rate includes plastering with C.M(1:3) 20mm thick both inside and out side and smooth finishing of Sewer channel, providing top coping 150mm thick with R.C.C M30 Design Mix using 400Kgs of Cement/Cum including supply and fixing of 35 H.D Manhole cover as per BIS:12592 (Part 1&2) with frame and encapsulated plastic steps including cost and conveyance of all materials, including cost and fabrication of steel used in R.C.C coping as per S.S. including benching, channeling, finishing and refilling with excavated earth and conveyance of surplus earth etc., complete as per S.S and as directed by the departmental authorities for finished item of work. (APDSS NO.1325) For Circular Manhole 0.90m deep (0.76 to 1.05M)

Manufacture,Supply & Delivary of manhole cover and frame manufacture as per BIS:12592 (Part 1& 2) any where in AP F.O.R.destination including loading,unloading & stacking ,central exice duty etc;complete as applicable for 35EHD 560mm dia clear opening manhole cover & frame

S/D and Lowering, laying of SWG pipes in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and hemp yarn including cost and conveyance of all materials etc; complete. For 100mm dia

S/D and Lowering, laying of SWG pipes in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and hemp yarn including cost and conveyance of all materials etc; complete. For 150mm dia

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) For OD 110mm dia (10kg/sqcm) (MAT-07315)

Supply of SWG Saddles conforming to IS standards 150 x100 mm including cost and conveyance of all materials and labour charges for fixing etc., complete.(BMW-A.75)

Supply and Fixing of House Service Connections (HSCs) including all materials and labour charges etc,. Complete as directed by the departmental authorities. For S/D of 1/2" HDPE Pipe