Construction of Tubewell and Laying of Distribution System at Sarvannath Nagar Under Haridwar Urban Water Supply Scheme

Rates for CONSTRUCTION OF TUBEWELL AND LAYING OF DISTRIBUTION SYSTEM AT SARVAN NATH NAGAR UNDER HARIDWAR URBAN WATER SUPPLY SCHEME

DRILLING & DEVELOPMENT OF TUBE WELL BY HEAVY DUTY DIRECT ROTARY RIG MACHINE IN DISTRICT HARIDWAR. (150 meter Deep)

Transportation of suitable truck mounted rig machine, air compressor, OP unit, camp equipage ,connected T&P and necessary accessories, casing pipe ,tube well assembly housing pipe etc including loading, unloading creation and eveling of rig machine upto site of work etc complete in all respect as per direction of Engineer in charge required for drilling and development of TW

Erection & Leveling of rig machine at site of work

Drilling of 550 mm dia bore by heavy duty direct rotary Rig machine in alluvial, boulders, pebbles, rocky stone, sticky clay etc from ground level upto entire depth for 300 mm dia linear assembly

Procurement of TW assembly as below 300 mm dia MSERW pipe 7.90mm thick (i) Blind & Threaded

(ii) Slotted & threaded

300 mm Dia Bail Plug

300 mm Dia MS well cap

300 mm Dia MS clamp with nuts & bolts

Supply of pea gravel of size 1.6 mm to 4.8 mm

Surrounding of pea Gravels in between bore and tube well assembly upto entire depth of tube well ordered by the department

Preparing & lowering of tube well assembly starting from G.L. to the required depth including cutting, welding as required at site complete with all T&P required. Fixing of 300 mm dia bail plug with Nut & U-bolt.

Lowering of 300 mm dia MSERW housing pipe (Plain & Slotted pipe) as required.

Fixing of 300 mm dia, 8 mm thick tube well cap.

Fixing of 300 mm dia M.S.D.I. housing clamp.

Dismantling of Rig Machine & Clearance of site after satisfactory completion of work.

Development of T/W by 350 PSI/1400 CFM air compressor unit to the satisfaction of Engineering in charge to give sand free discharge and proper packing of pea Gravels at least for 70 Hrs.

Development of T/W by the suitable submersible OP units complete with Lowering and lifting of pumping plant having 2000 LPM discharge approximate including running of OP unit and weld testing of tube well by V Notch atleast for 60 Hrs to the satisfactory completion of work.

SITC OF PUMPING PLANT

Supply of Submersible Pumping Plant (Capable of Delivering 2000 lpm Discharge at 52 m Head) or of suitable capacity With suitable Electric Motor as per design to be Operated on 415+\-10% Volts, 3 Phase, 50 Hz AC Supply With 5 m Submersible Cable.

Power Wiring & Earthing Material as Per IE Rule. Supply, Fixing, commissioning & testing of 200 Amp MCCB.

Supply, Fixing, commissioning & testing of 1 x 3 x 25 Sq.mm. Submersible Cable

Earthing Material (Copper Earth Strip, Copper Earth Plate etc. Including Digging of Pit & Complete Earthing Work in All Respect.

Supply, Fixing, commissioning & testing of Main Pipe line & Valves of 150 mm Size Having Following Items. 150 mm dia x 7.1 mm Thick Column Pipe in 3 m Length .

Supply and fixing of MS flange for 150 mm dia x 7.1 mm Thick MSERW Column Pipe in 3 m Length

150 mm dia CI D\F Sluice Valve With Hand Wheel

150 mm dia CI D\F Reflex Valve.

150 x 150 x 150 mm dia A/F Tee.

150 mm dia CI D\F 90° Bend.

150 mm dia M.S D\F Pipe of 1.5 M Length.

MS DI Clamp.

Tube Well Cap.

Necessary Nuts, Bolts & Packings.

Making Arrengement of by-pass of tubewell

Supply of Necessary Tools & Spanners.

Supply of 2.0 Tonnes Capacity & 4.5 m Lift Chain Pulley Block.

Supply of 25 mm Thick Rubber Resistance Insulated Sheet. Size 2 m x 1 m.

Consumable Items for Installation & Commissioning of Pumping Plant & All Accessories

AUTOMATION Supply,Installation,Testing and Commissioning(SITC) on turnkey basis for fully automatic pump automation control panels of suitable installed motor having intelligent unit having "FIELD PROGRAMMABLE LOGIC CONTROLLERS based, SCADA Operated Pump Motor Start,Run,Control,Protect against faults automatically operated control & Management System" for Supervisory Control and Data Acquisition System at Pumping water supply schemes including supply of water level indicator compitable to the above panel & data should be shown in supervisiory control & data aquision system.Two years free of cost A.M.C for warranty period of following duties as per specifications sheet enclosed & suitable for integration in the existing system including cartage from works of manufacturer upto site of work.

SITC OF INJECTING DOSER: Supply & installation of Electronically controlled, electrically actuated, diaphragm operated, chemical metering Pump, including arrangement for wall mounting, suitable for delivering upto 6 litres of Chemical Solution / Sodium Hypo Chloride Solution per hour under maximum delivery. Pressure upto 6 Kg/cm2 & suction lift not less than 1.5 metre &also including PVC tank(capacity 200 ltr.),nozel,tubing,necessary valve and all type of labour,material T&P complete required for proper completion of work.

SITC OF SERVO VOLATAGE STABLIZER Supply,installation,Testing and Commissioning of Three phase Digital Rolling Contact Servo Voltage Stablizers Suitable For Unbalance Load including fixing of proper size copper lugs on input and output cables on both ends at Different sites on Turnkey Basis including 5 years cost free maintenance. For Input Voltage (350V-480V phase-to-phase) , Out put Voltage (415 volts ± 5%),85 KVA

Supply,installation,testing and commissioning of ISI Marked 4 core copper flexible cable of 50 sq.mm as per IS:694:1990 with latest amendments for proper completion .

Supply & installation of Auto phase reversal unit

RISING MAIN

Supplying carting , laying , jointing of full length 150 mm DI K-9 pipes, including jointing etc.

Excavation of earth for pipe line in soil mixed with shingle ,bajri, and boulder strata lift up to 1.5 m. lead up to 30m. Including reffiling, watering, remaining lf excavated earth into the trenches and removal of surplus earth up to a distance of 60m from trenches including supply of labour T&P etc. all complete.

CONSTRUCTION OF PUMP HOUSE (size 3.6 mx3.6mx 3.0 m).

Earth work in excavation in Foundation including lift upto 1.5 meter and lead up to 30 meter and including filling, watering, ramming of excavated earth into the trenches or in to the space between the building and site trenches or in to treches and including all labour, T&P etc. required for proper completion of work.

Earth filling in plinth including watering,dressing ,ramming and carriage from a distance not exceeding 60 m from the site of work including all type of materials, labour, T&P etc. required for proper completion of work .

Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.

Plain Cement Concrete 1:3:6 with 40 mm gauge stone ballast, Course sand and Cement in foundation and floors, including supply of all material labour and T&P, required for proper completion of work.

Reinforced cement concrete 1:2:4 work in walls (any thickness), including attached pilaste shuttering, finishing and reinforcement

R.C.C.1:1.5:3 for beam & stiffner in foundation

First class B/w in 1:6 Cement, coarse Sand mortar in foundation and plinth including supply of all materials, labour and T&P.required for proper completion of the work

R.C.C. 1:1.5:3 with Cement, Coarse sand and 20mm gauge stone ballast in Beam and Column excluding supply of reinforcement and its bending but including its fixing, binding cost of binding wire necessary centring and shuttering etc and moulds all other material, labour, T&P etc required for proper completion of work,

First class brick work in 1:6 Cement, Coarse sand mortar in superstructure ( One brick thick) including necessory scaffoding and including supply of all material, labour and T&P etc.required for proper completion of the work.

R.C.C. 1:1.5:3 with Cement, Coarse sand and 20mm gauge stone ballast in Roof slab and sun shade etc excluding supply of reinforcement and its bending but including its fixing, binding cost of binding wire necessary centring and shuttering etc and moulds all other material, labour, T&P etc required for proper completion of work

Mild steel and iron works in reinforced concrete work (when not included in overall rate ) including bending and supply of all steel and wastage, over laping and hook, labour and T&P etc. required for proper completion of work

4cm (1”) thick 1:2:4 plain C.C floor with cement approved coarse sand and 20 mm (3/4”) graded approved stone shingle laid in panels finished with 3mm floating coat of neat cement or cement and with base concrete 1:4:8 as specified and including all material, labour and T&P etc required for proper completion of the work as per specifications.

S/F of galvanised iron mosquito proof heavy quality iron wire jali over window & ventilater with shisham wood battern.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required.

Plain Cement Concrete 1:2:4with 20 mm gauge stone ballast, Coarse sand and Cement in Hold Fast of door and windows, including supply of all material labour and T&P, required for proper completion of work.

S/F of Single leaf flush 35 mm thick door shutter commercial quality confirming to IS 2202 Part- I 1983 including supply & fixing of hinges bolt lock, handle.

12 mm thick plaster in 1:6 Cement , Coarse sand mortar including supply of all material, labour and T&P. For 100 sqft.

one coat of priming and two coat of oil distemper on including scrapping of old surface including supply of material,labour T &P etc required for proper completion of work .

Finishing wall with water proof acrylic paint of approved make and quality on new work with two coats to give an even shade, including supply of all materials, labour & T&P etc. required for completion of work.

Painting or varnishing new iron work or new wood with one coat of ready mixed priming paint and three coat of approved superior quality ready mixed paint or varnish including supply of all material s and T &P etc required for proper completion of work.

Making of drip course(25x12) mm in 1:2 cement and coarse sand including all material, labour and T&P etc. required for proper completion of the work.

Internal Electrification works @ 3 %of total cost of constrction of pump house (size 3.6 mx3.6mx 3.0 m).

BOUNDARY WALL, APPROACH ROAD AND GATE

Construction of boundary wall as per type design for the following including supply of all materials, labour, T&P etc. complete required for proper completion of the work.

Fixing of 3.6m wide M.S. gate with wicket gate including fabrication and supply of steel and construction of boundary pillars etc. all complete.

Dry brick pitching half brick thick in drains including supply of bricks and preparing

shyam engineers