EOT/W/26-27/000026

PAINTING WITH BEST QUALITY SYNTHETIC ENAMEL PAINT OF APPROVED MAKE AND BRAND INCLUDING SMOOTHENING SURFACE BY Sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface :With other than hi-gloss of approved quality Two coats (with any shade except white)

PAINTING WITH READY MIXED RED LEAD PAINT OF APPROVED MAKE AND BRAND : 2 COATS INCLUDING CHIPPING OFF AND SCRAPING OF Old paint and rust, 2 coats

CEMENT CONCRETE (1:1.5:3) WITH GRADED STONE CHIPS 5.6 MM SIZE WITH HEXAGONAL SQUARE MESH WIRE NETTING, I.R.C. FABRIC MESH OR X.P. M. FITTED AND FIXED AFTER TYING THE EXISTING REINFORCEMENT ON CONCRETE WITHOUT DISTRIBUTING THE SAME AND WITH PROPER SCARPING AND CLEANING THE REINFORCEMENT AND DISTURBED CONCRETE WITH WIRE BRUSH ETC. AFTER APPLYING A COAT OF CEMENT INCLUDING THE COST OF WIRE NETTING I.R.C OR X. P. M. & COST OF ALL HANDLING AND scaffolding complete as per direction of Engineer-in -charge. 37.5 mm thick

CLEANING THE CONCRETE SURFACE BY REMOVING DIRT AND DEBRIS, MARKING DEFECTIVE LOCATIONS AND REMOVING LOOSE CONCRETE BY CAREFUL STRIPPING UNTILL HARD SURFACE IS EXPOSED, CUTTING THE CONCRETE TO REGULAR SHAPE, WIRE BRUSHING THE EXPOSED SURFACE AND REMOVING DEBRIS FROM SITE complete as per direction of the Engineer - in - Charge.

ARTIFICIAL STONE IN FLOOR, DADO, STAIRCASE ETC WITH CEMENT CONCRETE (1:2:4) WITH STONE CHIPS, LAID IN PANELS AS DIRECTED WITH TOPPING MADE WITH ORDINARY OR WHITE CEMENT (AS NECESSARY) AND MARBLE DUST IN PROPORTION (1:2) INCLUDING SMOOTH FINISHING AND ROUNDING OFF CORNERS INCLUDING RAKING OUT JOINTS OR ROUGHENING OF CONCRETE SURFACE AND APPLICATION OF CEMENT SLURRY BEFORE FLOORING WORKS USING CEMENT @ 1.75 KG/SQ.M ALL complete including all materials and labour. 20 mm. thick, all floor

SHUTTER CONSISTING OF OUTER FRAME MADE OUT OF M.S. TUBES OF 19 GAUGE THICKNESS AND SIZE 19 MMX19 MM FOR STYLES, TOP AND BOTTOM RAILS, M.S. FRAME SHALL HAVE COST OF STEEL PRIMERS OF APPROVED MAKE AND MANUFACTURE, M.S. FRAME COVERED WITH 5 MM TH. HEAT MOULDED PVC “C” CHANNEL OF SIZE 30 MM TH, 70 MM WIDTH OUT OF WHICH 50 MM SHALL BE FLAT AND 20 MM SHALL BE TAPERED IN 45 DEGREE ANGLE ON EITHER SIDES FORMING STYLES; AND 5 MM TH. 95 MM WIDE PVC SHEET OUT OF WHICH 75 MM SHALL BE FLAT AND 20 MM TAPERED IN 45 DEGREE ON THE INNER SIDE TO FORM TOP & BOTTOM RAIL AND 115 MM WIDE PVC SHEET OUT OF WHICH 75MM SHALL BE FLAT AND 20 MM SHALL BE TAPERED ON BOTH SIDES TO FORM LOCK RAIL. TOP, BOTTOM AND LOCK RAILS SHALL BE PROVIDED EITHER SIDE OF THE PANEL WITH 10 MM (5 MMX2) TH.,20 MM WIDE CROSS PVC SHEET AS GAP INSERT FOR TOP RAIL AND BOTTOM RAIL. PANELING OF 5 MM TH. BOTH SIDE PVC SHEET TO BE FITTED IN THE M.S. FRAME WELDED/SEALED TO THE STYLES &RAILS WITH 7 MM (5 MM+2 MM) TH.X15 MM WIDE PVC SHEET BEADING ON INNER SIDE AND JOINED TOGETHER WITH SOLVENT CEMENT ADHESIVE. AN ADDITIONAL 5 MM TH. PVC STRIP OF 20 MM WHICH IS TO BE STUCK ON THE INTERIOR SIDE OF THE “C” CHANNEL USING PVC SOLVENT ADHESIVE ETC. COMPLETE EXCLUDING ALL NECESSARY hardwares as per direction of Engineer-in-Charge. All floor Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door

APPLYING 2 COATS OF NON- TOXIC ACRYLIC POLYMER MODIFIED PAINT HAVING ADHESIVE & WATERPROOFING PROPERTIES BY MIXING IN PROPORTION (1 LIQUID: 4 CEMENTITIOUS MATERIAL) OR AS PER MANUFACTURER'S SPECIFICATION FOR water proofing layer in water tank etc.