REPAIRS/REPLACEMENT TO BRICK WORK AND PLASTERING WORK AT AF STATION SURYALANKA

Amount

Taking down cement or cement lime plaster, any description, on brick walls including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in two layers, first layer 10 mm thick in CM 1:6 and second layer 5 mm thick in CM 1:4 finishing fair and even mixed with WPC as per manufacturer's instructions complete all as specified and directed. (Note : Supply of water proofing compound shall be measured and paid separately).

Supply only of integral water proofing compound of approved make complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling surface finished even and smooth with out using extra cement complete all as specified and directed.

M&L preparing new surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down, and applying one coats of with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with sub-class `B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

S&F in repairs of Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mmx 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F Stainless steel plate rack 1 mm thick of size 760x930x200 mm of standard makes complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement morar bedding, removing serviceable tiles to store and rubbish off the premises complete all as spd and as directed by Engr-in-Charge

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry laid over and including 15mm thick screed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as spd and as directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles 300 x 200 size 7 mm thick in vertical surfaces as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick screed in cement mortar in cement mortar 1:4 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed in cement mortar mortar 1:6 complete all as specified and directed.

M&L for 100 mm high skirting with joint free non Skid ceramic coloured tiles (matt finish) 7 to 8 mm thick high area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 10 mm thick backing coat in cement mortar mortar 1:4 complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level )including removal of demolished material out side MD land complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick cement concrete type C-2 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for reinforcement cut as reqd to facilitate demolition complete all as specified and directed.

M&L for TMT steel bars 8mm dia cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed not less than 0.90mm dia) complete all as spd and as directed.

Providing, cement concrete in roof type B-2(1:2:4) 20mm graded stone aggregate , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for Running welding in repairs thickness of metal welded n exc 6mm complete all as specified and directed.

M&L for Welding in repairs n. exc 2.5cm in length thickness of metal welded n exc 6mm complete all as specified and directed.

M&L for in repairs 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.

M&L for in repairs12 mm tk Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

all as above as per item no 30 -18mm tk complete all as specified and directed.

M&L for in repairs Harrison rails, aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for providing weld mesh size 100 x 100 x 3mm weld mesh and the mesh with shear connectors with 8mm dia reinforcement by drilling 75mm deep anchoring holes and filled with epoxy resign 20gm/hole with Shaligrout Anchor as per manufacturers instruction including all necessary scaffolding, machinery, tools tackles and men materials complete all as spd and directed by Engr-in-Charge. Make : Shaligrout Anchor of STP or equivalent brand in Fosroc/Dr. Fixit.

DHANA CONSTRUCTIONS

K VENUGOPALA SWAMY