station building and Proposal for developments of Circulating area at KVR Station IRPSM ID:-11.06.53.25.3.47.019. SW-2 :- Proposed Construction of Tensile Roof Sheet ,RCC Retaining wall , Extension of RCC Box bridge , Granite Flooring work at KVR station IRPSM ID :- 11.06.53.25.3.47.013.

A-Schedule-A (List of items of works that are covered by DSR-2023 of

B-SW-2 Schedule-B (Bridge Items) (List of items of works that are

A1-Schedule-A1 TMT Steel (List of items of works that are covered by

A2- Schedule-A2 Structural Steel (List of items of works that are covered

B1-SW-2 Schedule-B1 Cement Items (List of items of works that are

B2-SW-2 Schedule-B2 ( Reinforcement ) (List of items of works that are

Item Breakup - A-Schedule-A (List of items of works that are covered by DSR-2023 of CPWD, Delhi)

Item Breakup - B-SW-2 Schedule-B (Bridge Items) (List of items of works that are covered USSOR -2021 )

All kinds of soils

Providing and laying Plain Cement cum Concrete 1:3:6 with graded stone aggregate of 40mm nominal size, in foundation and floors, retaining walls of b r i d g e s including mechanical mixing, vibrating, pumping and bailing out water where ever required with all materials and labour complete but excluding the cost of cement and shuttering as per drawings and technical specifications as directed by Engineer.

Providing and casting machine batched, cum machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix, mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants, (Cast in- Situ/Pre-cast) in bottom/top slab, side walls, toe wall and sumps haunch filling head walls, thrust bed or any other component using 20mm graded crushed stone aggregate and coarse sand of approved quality of RCC box of any size including finishing, Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability, complete as per drawings and technical specifications as directed by Engineer in charge. Note: 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons at the stage of Mix Design and in that case deduction shall be made as per relevant item.

Providing and applying two coats of coal Sqm tar or bitumen confirming to IS:3117- latest version on the top and sides of RCC box/slabs @ 1.70 kg/sqm after cleaning the surface with all labour and materials complete job as directed by the Engineer. VIJAYAWADA DIVISION-GATI SHAKTI/SOUTH CENTRAL RLY Centering and shuttering including strutting, propping etc. and removal of form for :

All types of bridge sub-structures, e.g. Sqm pier, abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level Painting of cleaned plate/composite bridge girders including all scaffolding along with provision of Jhoola / hanging scaffolding ladders etc. where required.

With two coats of Aluminium paint in dual Sqm containers conforming to IS:2339 with DFT of 15 - 20 Microns for each coat.

Supplying of stone boulders weighing not cum less than 35 kg each at specified bridge locations.

Supply and laying of coarse sand including cum consolidation with all labour, lead, lift, tools, plants, crossing of tracks as per drawing and technical specification as directed by the Engineer in charge in case loose slush is encountered at site of foundation before casting the foundation or laying the filtering media. Grouting of masonry/concrete by injection process duly Sealing of cracks, through nipples complete as per Technical Specification and procedure given in IRBM Para No 209 including necessary admixture. Payment shall be as per use of cement by weight in case of neat cement/cement mortar grouting and weight of Epoxy in case of Epoxy Grouting. (Cement will be paid extra).

Neat Cement Grout with 20% shrinkage compound w.r.t. cement.

Providing cast in-situ plaques for bridge Each foundations details of size 45cmx45cmx5cm in cement concrete 1:2:4 mix using 20mm hard stone aggregate embedded in 30mm deep notch over abutment & piers, engraving the letters & figures with CM 1:3 and finished smooth including painting letters and figures with 2 coats of black enamel and plaque with white enamel with all labour, tools, cement, paint, curing etc. as a complete job. Providing & laying non pressure NP-4 Class RCC pipe with collars, jointing with 1:2 cement and ordinary sand mortar including testing of joints, but excluding earthwork with all labour and material as a complete job. Cement for mortar will be paid separately.(Pipes of 600mm dia and above will be laid using crane/hydra).

1200mm dia. VIJAYAWADA DIVISION-GATI SHAKTI/SOUTH CENTRAL RLY

Dewatering of natural or accumulated HP water from any location. Payment to be Hour done for Horse power of pump multiplied by pumping hours. Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

JCB Backhoe Loaders 3DX Plus or similar Hour with minimum 1.10 cum bucket capacity Total 1232508.04

Item Breakup - C-NS Items

Design of overall Tensile structure for Sqm canopy including membrance(Fabric)& steel. Supply of fabricated steel as per design, Erection ,painting of steel structure & installation & Tensioning of membrane (Fabric)wind load of 44m/s.1.38 kn/Sqm.Designing ,Supply fabric &Erection of structure steel works with necessary Gusset plates,Stiffener plates,Brackets,Bolts,Cleats Etc.,including paining Structural frame shall be factory fabricated from structurak steel using standard make IS 1239 pipes.YST240 the steel design shall be as per IS code 800.All segments of the assembly will be welded properly by mig weld &all segments of the assembly will be welded by properly by mig & all sharp edges and corners are grinded. the steel shall be enamel painted with two coats at (with brush) over zinc chromate primer for good finish.Approved make JINDAL/APPOLLO/SURYA/NEUZONE, Designing,supply fabricated &installation of PVDF fabric to be used is serge Ferrari, France Flexlight 90252(950gsm) of tensile strength 420/400 daN/5cm and 83252(850gsm) of tensile strength 420/420daN/5 cm steel cables,end plates,Tensile hardware and all accessories.

Site Survey and preparation of GAD/ESP in Each AUTOCAD for one drawing. (Preparation of GAD/ESP in Autocad, submit check print ,drawing upload in E-das,then attending GS/Division officers comments,then sent drawing HQ's for Approval, remarks attend till Drawing Approval. ( New Station building drawing GAD - 1 No's), Total = 1 No's. VIJAYAWADA DIVISION-GATI SHAKTI/SOUTH CENTRAL RLY

Supplying and providing work station size Each 5'-1"x5'-1"x29" with 18mm plywood for two persons including storage almirahs 2no of size (1'-6"x2'-6"x6" & 1'-6"x2'- 6"x2') with 12mm plywood for each with two locks and all laminated both sides and provision of 12mm thick glass 12" height at two sides & center above table top including seating arrangements with revolving chair with all hardware including hinges, handles and channels with all contractors materials, transportation, tools,labour lead,lift&taxes if and as directed by the Engineer-in charge at site. Total 811291.20 Item- 2 SW-2 Schedule-C NS items S No. Item No Description of Item Unit Qty Rate Amount

Design of overall Tensile structure for Sqm canopy including membrance(Fabric)& steel. Supply of fabricated steel as per design, Erection ,painting of steel structure & installation & Tensioning of membrane (Fabric)wind load of 44m/s.1.38 kn/Sqm.Designing ,Supply fabric &Erection of structure steel works with necessary Gusset plates,Stiffener plates,Brackets,Bolts,Cleats Etc.,including paining Structural frame shall be factory fabricated from structurak steel using standard make IS 1239 pipes.YST240 the steel design shall be as per IS code 800.All segments of the assembly will be welded properly by mig weld &all segments of the assembly will be welded by properly by mig & all sharp edges and corners are grinded. the steel shall be enamel painted with two coats at (with brush) over zinc chromate primer for good finish.Approved make JINDAL/APPOLLO/SURYA/NEUZONE, Designing,supply fabricated &installation of PVDF fabric to be used is serge Ferrari, France Flexlight 90252(950gsm) of tensile strength 420/400 daN/5cm and 83252(850gsm) of tensile strength 420/420daN/5 cm steel cables,end plates,Tensile hardware and all accessories.

Suppying and fixing 4 seater SS waiting Each chairs with two arms and backrest made out of SS 304 grade materials Each 57 21389.70 1219212.90overall length 1750mm, width 450mm and height 900mm (similar to below design) with Jindal made raw materials and laser cutting of all parts. Final product will be matt finished. Weight approx. 45Kg

Suppying and fixing Railway drinking Each water booth made of SS 304 grade materials sheet thickness will be used 3.0mm and pipe dia 168 mm, overall height 1850 mm (similar to below design) with Jindal made raw materials and laser cutting of all parts. Final product will be matt finished. Weight approx. 116 Kg Total 12092988.90 Schedule A1-Schedule-A1 TMT Steel (List of items of works that are covered by DSR-2023 of CPWD,

Item- 1 SW-1 Schedule-A1 TMT Steel

S No. Item No Description of Item Unit Qty Rate Amount

VIJAYAWADA DIVISION-GATI SHAKTI/SOUTH CENTRAL RLY

5.0 REINFORCEMENT CEMENT CONCRETE

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work

including straightening, cutting, bending,

placing in position and binding all

complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of Kg 99201 107.85 10698827.85

grade Fe-500D or more.

Item- 2 SW-2 Schedule-A1 TMT Steel

S No. Item No Description of Item Unit Qty Rate Amount

5.0 REINFORCEMENT CEMENT CONCRETE

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work

including straightening, cutting, bending,

placing in position and binding all

complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of Kg 42000 107.85 4529700

grade Fe-500D or more.

Schedule A2- Schedule-A2 Structural Steel (List of items of works that are covered by DSR-2023 of

Item- 1 SW-1 Schedule-A2 Structural Steel

S No. Item No Description of Item Unit Qty Rate Amount

10.0 STEEL WORK

10.1S General

10.1 Structural steel work in single section, Kg 700 117.35 82145

fixed with or without connecting plate,

1 including cutting, hoisting, fixing in

position and applying a priming coat of

approved steel primer all complete.

10.2 Structural steel work riveted, bolted or Kg 6000 133.7 802200

welded in built up sections, trusses and

2 framed work, including cutting, hoisting,

fixing in position and applying a priming

coat of approved steel primer all complete.

10.28 Providing and fixing stainless steel ( Grade Kg 1284 772.4 991761.6

304) railing made of Hollow tubes,

channels, plates etc., including welding,

grinding, buffing, polishing and making

curvature (wherever required) and fitting

the same with necessary stainless steel

nuts and bolts complete, including fixing

the railing with necessary accessories &

3 stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top

of the floor or the side of waist slab with

suitable arrangement as per approval of

Engineer-in-charge, (for payment purpose

only weight of stainless steel members

shall be considered excluding fixing

accessories such as nuts, bolts, fasteners

Schedule B1-SW-2 Schedule-B1 Cement Items (List of items of works that are covered USSOR -2021

Item- 1 SW-2 Schedule-B1 Bridge Cement Items of USSOR-2021

S No. Item No Description of Item Unit Qty Rate Amount

Supply and using Cement at Worksite

approved brands/makes

Schedule B2-SW-2 Schedule-B2 ( Reinforcement ) (List of items of works that are covered USSOR -

VIJAYAWADA DIVISION-GATI SHAKTI/SOUTH CENTRAL RLY

Item- 1 Sw-2 Schedule-B2 Bridge Reinforcement Items of USSOR-2021

S No. Item No Description of Item Unit Qty Rate Amount

Supply of steel reinforcement of approved

brands/makes for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete.

grade Fe-500D or more of approved