NAIL GUJRAND GOV Supply scheme Under YAMKESHWAR blocks in District Pauri

Rates for Supplying ,carting , laying and jointing of G.I pipe (M) , Source work ,Reservoir& Providing Functional House Hold Tap Connection (FHTC) for appropriate & qualitative drinking water for each house hold and all other appurtenant works etc complete NAIL GUJRAND water Supply scheme Under YAMKESHWAR blocks in District Pauri. All rates shall be included all types of taxes and G.S.T. It is necessary the contractor will start the work from source to Distribution System. If any dispute in the source than other work will not done by the contractor

Transportation of suitable truck mounted Rig machine, air compressor, OP Unit, Camp equipage, connected T&P and necessary accessories, mini Tubewell assembly housing pipe etc. including loading unloading erection as per direction of Engineer incharge, required for drilling and development of mini tubewell

Drilling of bore 200 mm size by rig machine using ODEX method in alluvial. Boulders, pebbles, rocky stone, sticky clay etc. including lowering welding of required kind/sizes of MS ERW casing pipe (blind/slotted) from ground level upto entire depth ordered by the department.

Development of mini tubewellby suitable air compressor unitto thesatisfaction of Engneer incharge to give sand free discharge atleast for 15 hr

Development of mini tubewell by the suiatble submerssible OP unit complete with lowring and lifting of pumping plant having suitable discharge including running of OP unit and yield testing of tubewell by V notch, atleast for 30 hrs to the satisfaction of Engineer incharge

Dismentalling of rig machine and other equipments and clearence of site after finishing the job

Supply and fixing of 200 mm size well cap after completion of work made from MS ERW pipe and MS sheet of 8 mm thick

Supply and fixing of suitable size casing shoe suitable for ODEX drilling and made from EN-24 steel

Supply and fixing bit tube of 100 cm in length made out of seamless casing pipe as per requirement of ODEX attachment etc.

Supply and fixing of 200 mm size MS housing clamp 8 mm thick including nut, bolt and washers complete set

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain/ slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia (casing/housing/slotted)

Column pipe (MSERW PIPE)-Dia-65 mm, 4.8 mm

Geohydrological survey of site

Chemical & bacteriological testing of water sample

Supply, Carting (site store to trench), lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line by welding for making up lengths as required for proper completion of work of following grade & sizes ((Excluding cartage from Rail Head to site store.) MS ERW Pipe Yst 210 65mm Dia 4.8 mm thick

80 mm Dia 4.8mm thick

Painting of MSERW Pipes with 2 coats of approved quality. (Anti-Corrosive paint over one coat of Primer) (dia. of pipe in mm) 65mm Dia 4.8 mm thick

80 mm Dia 4.8mm thick

Supply of all materials, labours, T&P etc and construct RCC 1:1.5 :3 anchor / thrust blocks as per design complete

M.S. Iron work in anchor / thrust blocks .

Supply of all materials, labours, T&P etc and construct of briddle path along the alignment of rising main for cartage of rising main and later on for effective maintenance.

Excavation in foundation for retaining, breast walls etc, in all types of soilsand rocks including all lead, lift and disposal of surplus material as perdirection of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction

PCC 1:4:8 including supply of all materials, labour, T&P etc. complete

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Excavation of earth for pipeline in following strata lift upto 1.5 m lead upto 30 m including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60 m from trenches including supply of labour, T & P etc.all complete assuming that 90% pipe line is laid in trenches. Soil mixed with Shingle, Bajri and Boulders

Medium Rock

Dismantling of following existing CC road pavement for laying different sizes of pipes, stacking the serviceable materials and disposal of waste materials upto a distance of 30 m including supply of materials, labour, T&P etc. complete Bituminous road (Two layer)

Construction charge to road cutting of following road pavement (which was dismantled during execution of works) after laying of different sizes of pipes and disposal of debris if any upto a distance of 60 m including supply of all materials labour, T&P etc. complete Bituminous road at different places

Supply of all materials, labour, T & P etc and construction of BPT as per type, design (Size :- 1.0 m x 1.0 m x 1.0 m)

Supply of G.I. medium pipes & specials fittings Excluding Cartage) lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line including cutting and threading of pipe for proper completion of work of following sizes. 15 mm dia (Average 30m length for house connections)

20 mm dia

25 mm dia

32 mm dia

40 mm dia

Supply and fixing of the following fittings including cartage of materials, labour, T & P etc complete G.M Gate Valve IS 778 Vertical Check Class -1 20 mm

C.I. Air Valve (Screwed) 15 mm

Scour / Sluice valves (PN-1.6) as per I S 778/2000 50 mm dia

P/F of CI Air valve (Screwed) in position including all material labour T&P etc. 15 mm dia. Cast steel

Supply of all materials, labour, T & P etc and construction of Wheel / Air Valve chamber with brick work in 1:4 cement Sand morter, plastring in 1:3 c/s morter as per type, design (Size :- 0.6 m x 0.6 m x 0.75 m)

Supply of all materials, labour, T & P etc. and Construction of Sluice Valve / Reflux Valve / Scour Valve Chamber as per type design complete (Size :- 1.2 m x 1.2 m x 1.0 m)

Supply of all materials, labour, T & P etc. and Construction of Air Valve Chamber as per type design complete (Size :- 0.9 m x 0.9 m x 1.0 m)

Making Ferrul connection with the M.S./ Galvanised mains fixing ferrul, washer, stop cock etc. up to 25 mm nominal dia.

Brass ferrul 15 mm with C.I. mouth cover

Dismantling of following existing road pavement for laying different sizes of pipes, stacking the serviceable materials and disposal of waste materials upto a distance of 30 m including supply of materials, labour, T&P etc. complete CC Road (Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

PCC 1:2:4 including supply of all materials, labour, T&P etc. complete (For Re-construction of cc road at different places.)

Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. 3 KL

Supply and installation of Bucket Type Chlorinator of 25 L Capacity on the top of Service Reservoirs

Constuction of Pump House including, Earthwork, Brickwork, PCC, RCC, Painting, Electrical & Mechanical Works withall labour, Material, T&P etc complete size (5.50x 5.0x 4.5m)

Approach Road including PCC work with all labour, Material T&P etc Complete

Pravision of Sign Board

Cartage of Material including laoding & unloading

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. SOR UJN 2021-2022 Suction Pipe (40 mm Dia)

Delivery Pipe of Individual (40 mm Dia GI)

Common Delivery Pipe (50 mm GI )

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.

Providing, supplying and fixing Kinetic Double Orific type Air Valves conferming to IS 14845 specification having small orific elastic ball resting on a gunn metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, with built in Kinatic feature, isolating sluice valve mounted in horizontal position and oprated by wheel gearing, inlet face and drilling, including insurence, loading, unloading, transportation upto stores in all respect etc complete. Air Valve Double Ball Flanged Type - PN -1 15 mm Dia

Providing and supplying ISI mark CI /DF sluice valve, Butterfly valves & NRV (reflux valve) of following class and diameter including all taxes, insurance, transportation, fright charges, octrio, inspection charges, loading, unloading, convenynce to departmental store, stacking etc. complete 50 mm Dia

Providing and Fixing Woltman type Bulk Water Meter Inline type, flange end with integral mounted display and all necessary fitting etc complete. 50 mm Dia

Supply, Installation, Testing & Commissioning of CENTRIFUGAL PUMP, Head - 190 M, Flow - 1.87 LPS, 2900 RPM, with suitabe motor complete, automatic auto transformer type starter, Main Switch Complete

Supply, Installation & Commissioning of Submersible pump, Head - 75 M, Flow - 3.75 LPS, 2900 RPM, with suitabe motor complete, Servo Volatge Stabilizer, automatic auto transformer type starter, Main Switch Complete

Charges for Electrical Safety Clearance and Proper fencing of substation as per I.E. rules

1100 V grade XLPE insulated PVC sheathed GI flat armoured 'Aluminium conductor' power cable (A2XFY) of the following sizes as per enclosed detailed specifications and IS 7098 (Part-1).. 4C x 25 Sq.mm. (A2XFY)

1100 V grade XLPE insulated PVC sheathed GI round wire armoured 'Copper conductor' power cable of the following sizes as per enclosed detailed specifications and IS 7098 (Part-1). 3C x 4 Sq.mm. (2XWY)

3C x 2.5 Sq.mm. (2XWY)

Cable dead end termination kit with double compression brass glands, Aluminium lugs and tape as required for 1100 V grade XLPE insulated PVC sheathed GI flat armoured Aluminium conductor power cable of the following size : 4C x 25 Sq.mm.

Cable dead end termination kit with double compression brass glands, Copper lugs and tape as required for 1100 V grade XLPE insulated PVC sheathed GI round wire armoured Copper conductor power cable of the following size : 3C x 4 Sq.mm.

3C x 2.5 Sq.mm.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

12.5 Kg Carbon di oxide type portable fire extinguisher mounted on stands with wheels at bottom complete with fill.

6 Kg Capacity,wall mounted type foam soda acid extinguisher.

Provision of Sign Board

M/S limra enterprises