Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.1 LAccepted-AOC | L1 | Accepted-AOC BEING THE LOWEST BIDDER | |
| 2 | L2₹43.7 L+₹3.2 L (7.95%)Rejected-Finance GANDHI NAGARI AIRPORT ROAD BHUJ KUTCH PIN 370 001 GUJARAT | KACHCHH | GUJARAT | 370001 | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 3 | L3₹46.5 L+₹6.0 L (14.7%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
Tender Value
₹48.3 L
EMD Value
₹96,600
Closing Date
30 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
ADDITION/ALTERATION TO OPS AND MAINT INFRASTRUCTURE IN NORTH LOOP AT AF STN BHUJ
2023_MES_621686_1
8695/V/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
GE (AF) BHUJ
₹96,600
Yes
4 Dec 2023
5 Oct 2023
1 Nov 2023
5 Oct 2023
30 Oct 2023
18 Oct 2023
9 Oct 2023 - 12 Oct 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete with collars complete all as specified and directed by Engineer-in-Charge.
Material & labour for vitrified ceramic polished light shade tiles 10mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified and directed by Engineer-in-Charge.
All as per Ser Item No 2 above but in vertical surfaces such as dado, skirting and riser including10mm thick CM(1:4) backing coat of tiles,etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified and directed by Engineer-in-Charge.
Material & labour for glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match icluding backing coat of tiles CM (1:4) complete all as specified and directed by Engineer-in-Charge.
Desmentling of stone slab including pointed and beddding in any mortor complete all as specified and directed by Engineer-in-Charge.
Material & labour for 25mm thick cement concrete type B-1 1:2:4 ( 20mm graded aggregate ) finishing under floor, surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charged.
Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge.
Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of oil bound distempher over chalk whitening complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparing old existing plastered ceiling/soffits of chajjas surfaces and applying two coats of oil bound distempher over chalk whitening complete all as specified and directed by Engineer-in-Charge
Material & labour for rendering in cement mortar (1:6), 10 mm thick on brick wall or on concrete surfaces finished fair & even complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation of newly plastered surface of walls and apply two coats of oil bound distemper over and including a coat of 1mm average thick wall putty, complete all as specified and directed by Engineer in Charge.
Material & labour for preparation of existing old plastered surface of walls and apply two coats of oil bound distemper over and including a coat of 1mm average thick wall putty complete all as specified and directed by Engineer-in-Charge
Material & labour for rendering 15mm thick on brick work or concrete surfaces (in drain,external surface of wall etc.) in cement mortar 1:4, mixing with WPC as per manufacturer’s instructions, finishing plastered surfaces even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. NOTE:- Water proofing compound (WPC) will be measured and paid separately under appropriate Item as 'Supply only'.
Supply only Integral water proofing compound, conforming to IS 2465-1975 complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation of new or previously untreated concrete or PCC block masonry external surfaces and applying two coats of exterior emulsion paint (in camouflage pattern as approved by the GE) over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Material & labour for complete removal preparation of old existing plastered surface untreated concrete or PCC block masonry external surfaces and applying two coats of exterior emulsion paint (in camouflage pattern as approved by the GE) over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 10 mm thck on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparing old steel or iron surfaces of any description, over 10 Cm width or girth and applying two coats of synthetic enamel paint (first quality) complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparing new steel or iron surfaces of any description, over 10 Cm width or girth and applying two coats of synthetic enamel paint (First quality) over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge
Material & labour for 100 mm thick cement concrete type B-2 (1:2:4) using 40 mm graded stone aggregate as in as in floor complete all as specified and directed by Engineer-in-Charge.
Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engineer-in-Charge.
Supply & fix solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MD land complete all as specified and directed by Engineer-in-Charge.
Material & labour for reinforced cement concrete type A1, 1:1.5:3 using 20mm graded stone aggregate as in slabs supported on columns and beams complete all as specified and directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid separately.
Material & labour for providing precast reinforced cement concrete type A1, 1:1.5:3 using 20mm graded aggregate as in landings, cover slabs (for man holes etc) and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork and demolition / taking up of existing cover slabs & removing rubbish outside MD land complete all as specified and directed by Engineer-in-Charge.. Note : Supply & fix reinforcement shall be measured and paid separately.
Supply & fix TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.
Supply & fix TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.
Material & labour for formwork to sides and soffits of suspened slabs such as roof slabs, floor slabs, ladings and similar work, not exc. 200mm thick (horizontal or sloping) of rough finished concrete surfaces complete all as specified and directed by Engineer-in-Charge.
Material & labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished concrete surfaces complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n.exc. 10 sqm on plan and n exc 1.50m in depth and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches n.exc 1.5 mtr wide and exc 1.5 mtr but n.exc 3.0 mtr deep for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n.exc. 10 sqm on plan and n exc 1.50m in depth and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.
Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed by Engineer-in-Charge.
Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engineer-in-Charge.
Demolition and breaking up drain pipes 150 mm bore (Salt glazed ware, AC or reinforced concrete) set in cement mortar including the pipe inserted in Man holes walls etc. for undermentioned drain pipes, including removal of rubbish outside MD land complete all as specified and directed by Engineer-in-Charge.
Material & labour for providing cement concrete 1:3:6 type C-2 bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for complete all as specified and directed by Engineer-in-Charge..
Material & labour for laying SGSW pipe of 150 mm internal dia pipes of grade 'A' laid in trenches and jointed complete all as specified and directed by Engineer-in-Charge.
Demolition of precast concrete block walling built in cement morter complete all as specified and directed by Engineer-in-Charge.
Material & labour for Precast cement concrete block masonry with solid blocks exc 10cm in width Type C1 (1:3:6) (using 20mm graded stone aggregates) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material & labour for providing cement concrete type C1, 1:3:6 mix (20mm graded aggregate) in benching in manholes all as specified and directed including necessary use and waste of form work complete all as specified and directed by Engineer-in-Charge.
Dismantling of cast iron,PVC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of trenches if required complete all as specified and directed by Engineer-in-Charge for the following bore of pipe :-
100/110mm bore
75mm bore
Supply & fix UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors of following size complete all as specified and directed by Engineer-in-Charge for the following bore of pipe :-
110mm bore
75mm bore
Supply & fix UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge for the following bore of pipe :-
110mm bore
75mm bore
Supply & fix UPVC sockets equal, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge for the following bore of pipe :-
110mm bore
75mm bore
Supply & fix UPVC bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes complete all as specified and directed by Engineer-in-Charge.
Supply & fix UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes complete all as specified and directed by Engineer-in-Charge.
Supply & fix UPVC socket reducer 110mmx75mm size, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.
Supply & fix UPVC cowl for 75mm size pipes, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs of UPVC gully trap 150x110mm,setting and jointing with solvent cement including dismantling of surrounding concrete and fixing of gully trap with and including cement sand mortar 1:3 complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
Supply & fix waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix grating square 150mm size of PTMT (minimum weight 100 gms ) complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, bll valve, flaot and handle including brackets of 10 Ltr capacity complete all as specified and directed by Engineer-in-Charge.
Material & labour for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
Material & labour for 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including fixing bolts and Plastic water closet seat ( black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device) complete all as specified and directed by Engineer-in-Charge.
Supply & fix vitreous china urinals, bowl type flat back, size 465X355X265mm white (minimum), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; (Excluding flushing cistern and waste pipe ) complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing and connections including removal to store for reuse or credit to contractor complete all as specified and directed by Engineer-in-Charge for the following size :- Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing,where required
15mm bore
20mm bore
25mm bore
Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors (SDR-13.5) complete all as specified and directed by Engineer-in-Charge for the following size :-
20mm bore
25mm bore
32mm bore
Supply & fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge for the following size :-
20mm bore
25mm bore
Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position of capacity 750 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs for bib taps, fancy type, cast copper alloy with crutch handle, cromium plated, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs stop valve 15 mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.
Supply & fix PVC connection 450mm long with check nut for wash hand basin/ flushing cistern etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs shower rose 150mm dia, cast copper alloy, chromium plated, screwed end for iron pipe or for unionsof 15 mm dia, swivel joint complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs vitreous china wash basin, white, flat back, size 550mm x 400mm, including provision in replacement of brackets, pillar taps (cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, fancy type), Waste fittings ( brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed), PVC connections (15mm size with PTMT nuts of length 450mm) and waste pipe of 32mm dia UPVC pipe approximately 1.5m in length complete all as specified and directed by Engineer-in-Charge (Note:- including pillar tap) .
Demolition of concrete any thickness any position otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation board/slab/blankets of any thickness, etc. including cover fillets of any description complete all as specified and directed by Engineer-in-Charge.
Supply & fix anodised aluminium 605x605mm snap grid frame work for false ceiling complete all as specified and directed by Engineer-in-Charge.
Supply & fix 12mm perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid fixed in slope or flate surface ceiling, wall etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-Charge.
Supply & fix anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix sheet glass 5.5 mm thick plain and glazing in aluminium frame work,square or rectangular, area n exc 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.
Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repair, sink with drainage board made of stainless steel l.0mm thick kitchen or laboratory overall size 915x460mm bowl size 410x330x 160mm with plugs, washers and wastes, etc. including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed by Engineer-in-Charge.
Supply & fix n repair, waste coupling of PTMT (half or full threaded) for 32mm bore (dia) discharge pipe (minimum weight 45 Gram) suitable for glazed ware sinks, basins, etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repair, health faucet including 1.50 metre tubes & hook, (as approved) connecting complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repair, angle stop cock 15mm bore (dia) fancy type, chromium plated, screwed down, high pressure, with crutch or butter-fly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repair, drapery rod 20 mm dia, decorative type complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repair, end stopper, decorative type and fixing brackets for the drapery rod 20 mm dia. (one set comprises of 2 No. of decorative type end stopper 2 No. of fixing brackets) complete all as specified and directed by Engineer-in-Charge.
Supply & fix aluminium anodised barrel tower bolt 200 mm long, extruded section complete all as specified and directed by Engineer-in-Charge.
Supply & fix 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix aluminium alloy, 300 mm anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix stainless steel butt hinge of size 75 mm long (as approved) and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix stainless steel butt hinge of size 100 mm long (as approved) and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix aluminium alloy handle 100mm long febricated type, extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix aluminium alloy handle 150mm long febricated type, extruded Section and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repair, white plastic water closet seat for water closet pan (pedestal pattern), closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.
Rough excavation n exc. 1.50 deep and getting out any type of soil complete all as specified and directed by Engineer-in-Charge.
Forming embankments including raising (or lowering) earth, spreding in layers n exc 30cm thick, watering, ramming/rolling and finishing to required size, shape etc n exc 1.50m high from base (Note: lead for earth 500m) complete all as specified and directed by Engineer-in-Charge.
Forming embankments including raising (or lowering) earth, spreding in layers n exc 30cm thick, watering, ramming/rolling and finishing to required size, shape etc exc 1.50m high but n exc 3.0m high from base (Note: lead for earth 500m) complete all as specified and directed by Engineer-in-Charge.
Removing excavated material in soils exc. 1.50km but not exc 5.00Km and depositing where complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation of old existing previously untreated concrete or roof top, hardstanding , plinth etc surfaces and applying two coats of exterior emulsion paint inc pink primer (in camouflage pattern as approved by the GE) over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Material & labour for cement concrete 1:2:4 (using 12.50mm graded stone aggregate) in channels, etc. in manhole including necessary formwork (if required) complete all as specified and directed by Engineer-in-Charge.
Material & labour for extra forming fair finished to drains or channels 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/ stopped ends, etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for plain Cement concrete, type D2, (1:4:8), (using 40mm graded stone aggregate) in foundation and filling mass concrete complete all as specified and as directed by Engineer-in-Charge.
Material & labour for providing cement concrete type B1, 1:2:4 mix (20mm graded aggregate) in copings all as specified and directed including necessary use and waste of form work complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat frame without taking offf shutters from frame not exc 1.50 sqm complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat frame without taking offf shutters from frame exc 1.50 sqm not exc 4.00 SQM each complete all as specified and directed by Engineer-in-Charge.
Supply & fix collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and as directed by Engineer-in-Charge.
Surface excavation n. exc 30cm deep and averaging 30cm deep and getting out in soft loose soil complete all as specified and directed by Engineer-in-Charge complete all as specified and directed by Engineer-in-Charge.
Material & labour for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.
Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and as directed by Engineer-in-Charge.
Material & labour for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles complete all as specified and directed by Engineer-in-Charge.
Material & labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.
Material & labour for 60 mm thick (M-25 mix) glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) with grey cement no pigment conforming to IS-15658-2006 laid dry over 30 mm copacted sand bed, size & pattern of tiles complete all as specified and directed by Engineer-in-Charge. (Note:- sand cushioning paid separatelly)
Removing of surplus soil to a distance exceeding 250 Mtrs but not exceeding 500 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engineer-in-Charge.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard/denses soil complete all as specified and directed by Engr-in-Charge.
Material & labour for plain Cement concrete, type B2, (1:2:4), (using 40mm graded stone aggregate) in foundation and filling mass concrete complete all as specified and as directed by Engineer-in-Charge.
Supply & fix mild steel pipe fixed as vertical post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St.-240 as in posts complete all as specified and directed by Engineer-in-Charge.
Supply & fix steel work as rafters and web in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.
Supply & fix mild steel plates, plain or chequered, in Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed by Engineer-in-Charge.
Supply & fix Mild steel screw bolts 16 to 20mm Dia of Neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5cm long and not exc 10cm long complete all as specified and as directed by Engineer-in-Charge.
Supply & fix pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Supply & fix hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed by Engineer-in-Charge.
Supply & lay galvanised iron pipe medium class of size dia 25 mm in trecnches / wall /roof / floor including fittings of galvanised iron such as tee, elbow, flanges, sockets complete all as specified and as directed by Engineer-in-Charge.
Supply, install, testing and commisioning of horizontal openwell submersible pumpsets ,electric driven single phase 220-240V ,AC supply,50 Hz,2840 RPM with a capacity of 2 HP, Head range 08-30 mtr and discharge 300 LPM of suction and discharge size 50mmX40mm inclusive of submersible cable,starter,auto water level sensor including copper wire 1.5 Sqmm and SS probe complete all as specified and directed by Engineer-in-Charge.
Supply, spreading and filling of clean river sand spreading leveling in layers not exceeding 18 cm thick as cushioning to cable complete all as specified and directed by Engineer-in-Charge. (NOTE : Punned thickness of dry sand will be measured and paid) .
Supplying and laying un-reinforced precast concrete cable cover class LV, type - 2, flat, size 300x 180 x 40 mm complete all as specified and directed by Engineer-in-Charge.
Supply & fix ,connecting,testing and commissioning and jointing,LT under ground cable 1100 volts grade,XLPE insulated,armoured with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in trenches,ducts,fixed on poles/walls with proper size saddles and clamp laid under roads /path /drain /culverts or encased in GI pipe fixed & testing and commissioning complete all as specified and as directed by the Engineer-in-Charge for the following Sizes:- Note:- (i) Sand cushioning, Cable protection cover, GI pipes, excavation and earth work shall be measured and paid for separately under respective items of Schedule "A" .
LT cables upto 35 Sqmm, 4 core.
LT cables upto 10 Sqmm, 2 core.
Supply & fix 40 mm bore Galvanised iron tubes light grade for cable protection complete all as specified and directed by Engineer-in-Charge.
Material & labour for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to using galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers and providing galvanised iron or steel, 15 mm bore galvanised iron medium grade watering pipe, 40 mm bore galvanised iron light grade pipe for earth strip protection, including all excavation earth work in any type of strata, PCC 1:3:6 type C1 for chamber of internal size 300 mm x 300 x 300 mm with 120 mm thick wall and 700 mm x 700 mm x 150 mm thick bed concrete, RCC 1:2:4,type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.00 Kg/Sqm) with cast iron frame, funnel with wire mesh, test point etc complete all as specified and directed by Engineer-in-Charge. Note: (i) Earth strip and GI protection pipe up to length 7.5m shall deemed to be included in rate of above item.
Supply, testing and commissioning of LT electrical out door distribution panel board floor mounted cubical type dust proof, weather proof, vermin proof, astehically designed, having at least IP-54 degree of ingress protection, fabricated from 3.0 mm thick CRCA sheet with front and rear opening including bus bar chamber, continuous GI strip earth bus bar 4 strips of Copper bus bar having size 40 mm x 6 mm cross sectional area, insulated color sleeves, epoxy insulators, rail channels cable alloy, danger notice board including provision of angle iron frame of size 40 x 40 x 6mm, 30 cm grouted in ground floor and 30 cm above GL duly painted including necessary excavation, foundation, PCC etc complete with locking arrangement duly powder coated of approved color connecting incoming MCCB/Changover connection withcopper strip & outgoing cable connection with suitable lugs, nuts, bolts, washers and cable joints, prewired complete with PVC insulated fire retardant copper conductor cable complete.The panel having bird proof spikes with polycarbonate base including preparation of surfaces and fixing properly by using adeshive/silicon.The panel shall be comprising of the following:-
Supply, install & testing air cooled split unit air conditioner 100% copper condenser & copper evaporator electric driven single phase of capacity of 2 TR indoor & outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating (as per 2019 BEE rating) including MS stand for outdoor unit, suction and delivery line copper material of suitable length as per site requirement complete including flexible copper cable 3 core 4.0 Sqmm appx 2 M, UPVC drain pipe 20mm dia approx 3 RM of including making holes to existing wall to draw cable and pipes to connect the indoor unit to the out door unit including provision of extra copper tubing/ hoses etc and making good the disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.
Supply, install & testing air cooled split unit air conditioner 100% copper condenser & copper evaporator electric driven single phase of capacity of 1.5 TR indoor & outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating (as per 2019 BEE rating) including MS stand for outdoor unit, suction and delivery line copper material of suitable length as per site requirement complete including flexible copper cable 3 core 2.5 Sqmm appx 2 M, UPVC drain pipe 20mm dia approx 3 RM of including making holes to existing wall to draw cable and pipes to connect the indoor unit to the out door unit including provision of extra copper tubing/ hoses etc and making good the disturbed surfaces complete all as specified and directed by Engineer-in-Charge.
Supply & fix voltage stabilizer for automatic operation, wall mounted type single phase naturally air cooled indoor type & designed for input variation between 170 V to 260 V with output voltage stabilized at 230 V with low and high cutoff facility including under and over current protection with accuracy of ± 2.5% and of capacity 3 KVA complete all as specified and directed by Engineer-in-Charge.
Supply & fix voltage stabilizer for automatic operation, wall mounted type single phase naturally air cooled indoor type & designed for input variation between 170 V to 260 V with output voltage stabilized at 230 V with low and high cutoff facility including under and over current protection with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed by Engineer-in-Charge.
Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 1100 Volts grade, conforming to IS-1536-1977 multi-stranded 6 Sqmm single core, copper conductor drawn through and including concealed conduit and 6 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and as directed by Engineer-in-Charge. (Note : Two runs of conductor with one run of earth wire and pvc conduit will be measured & paid as one unit)
Material & labour for sub main wiring with 04 runs of 10 Sqmm and one run of 10 Sqmm as earth continuity, 1100 V grade PVC insulated, unsheathed FRLS grade copper conductor cable signle core, pvc insulated, multistranded ISI marked (IS-694) drawn through and including concealed condui heavy grade ISI marked (IS-9537, Part-III) including accessories such as bends, supports etc complete all as specified and as directed by Engineer-in-Charge. . Note : All runs of main cable and earth cable and one run of conduit/casing caping shall be measured as one unit.
Supply & fixing of 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by the Engineer-in-Charge for the following Sizes:-
MCB TPN 100 Amp
MCB SPN 32 Amp
MCB SP 5 To 32 Amp
Supply & fix sheet metal enclousure double door factory made DB protection class IP-43,suitable for fixing of MCBs conforming to IS13032, Isolators etc TPN 4 way with 200 Amp rated bus bar 415V powder coated complete all as specified and as directed by Engineer-in-Charge
Supply & fix metal clad enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed by Engineer-in-Charge. .
Talking down carefully copper/aluminium point wiring (light, fan,socket or power) complete including teak wood battens or from existing conduits with all fittings, such as switches, ceilling rose, pendants, sockets, lamp holder, fan regulators, brackets light fittings (except tube light fitting & ceiling fan) and removal of old material form site (except fitting to be reused) and making good disturbed surfaces of walls, floors ceilling etc complete all as specified and directed by Engineer-in-Charge to match with existing surfaces.
Taking down sub main wiring any size of two single core and one earth single core Aluminium/Copper conductor cable PVC insulated alongwith/ without conduit and accessories and removing from site of work making good the disturbed surfaces of wall and floor / ceiling etc complete all as specified and directed by Engineer-in-Charge.
Taking down main switch/DB’s/sintex box including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for point wiring complete with 1.5 sqmm single core multistranded copper conductor Flame Retardant Low Smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through and including non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5mm FRLSH PVC insulated unsheathed copper earth wire including Suitable for Modular switches and sockets complete all as specified and directed by Engineer-in-Charge. for the following:-
One light point controlled by one, one way switch single pole.
One Ceiling Fan/ Exhaust Fan point controlled by one, one way switch single pole.
One 3 pin 5 Amp socket outlet on the same board .
One 3 pin 5 Amps socket out let on independent board
One light point controlled by two, two way switches.
Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed as earth wire continuity one light point controlled by one, one way switch single pole complete all as specified and as directed by Engineer-in-Charge. .
All as per item No 143 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular metal flush box of module 1 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular metal flush box of module 3 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular metal flush box of module 6 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular surface mounting plastic box of module 6 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular metal flush box of module 8 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular metal flush box of module 12 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular white cover plate with frame of module 1 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular white cover plate with frame of module 3 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular white cover plate with frame of module 6 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular white cover plate with frame of module 8 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular white cover plate with frame of module 12 flush ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular blank plate module 1 complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular switch one way, 10 Amp, 1 module ISI Marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular switch one way , 16 Amp. ,1 module ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular socket 10 Amp, 2/3 pin, combined 2 module, ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular socket 6/16 Amp, 2/3 pin, combined, 2 Module. ISI marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix modular switch two way , 10 Amp. ,1 module ISI Marked complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix sheet metal enclousure double door factory made DB protection class IP-43, suitable for fixing of MCBs conforming to IS13032, Isolators etc single pole and neutral (SPN) 8 way with 200 Amp rated bus bar 240V powder coated complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix sheet metal enclousure double door factory made DB protection class IP-43, suitable for fixing of MCBs conforming to IS13032, Isolators etc single pole and neutral (SPN) 4 way with 200 Amp rated bus bar 240V powder coated complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix ceiling rose, surface type,polycarbonate body, two to three terminals complete all as specified and as directed by Engineer-in-Charge. .
Supply & fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-Charge. .
Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including galvanised earth lead wire 4.0 mm dia by means of nuts bolts checknuts and washers of galvanised iron including 15 mm bore GI pipe, medium grade upto 7.50 mtr long all as shown in electrical plate No. 3, SSR PART-I, and testing on completion including earth work and excavation in any type of soil/rock, PCC 1:3:6 type C1, earthing chamber, precast RCC slab 50mm thick in cement concrete 1:2:4 type B1 reinforced with welded steel wire febric or XPM [Weight hot less than 4 Kg/Sqm], with cast iron frame funnel with wire mesh, GI watering pipe of 20mm bore, medium grade test point and lugs omplete all as specified and as directed by Engineer-in-Charge. (Note: (i) Item includes cost of 7.5 mtr length of GI pipe and earth lead for protection of earth lead ,any variation in length shell be adjusted through deviation order (ii) on testing if earth resistance less than specified not obtained earthing will be regenerated at no extra cost till the desired earth resistance is obtained) c. .
Supply & fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-Charge (Note:- Old Ceiling fan deposit in AGE E/M store yard).
Supply & fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm complete all as specified and as directed by Engineer-in-Charge (Note:- Old Exhaust fan deposit in AGE E/M store yard) . .
Supply & fix LED Batten lights fitting 1x 20W, 220V,AC decorative slim linear ,polycarbonate body,round profile with lumens efficiency 100 Lumens/watt including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. .
Supply & fix building security light luminaire LED type 25 W with aesthetically designed sheet aluminium housing and UV stabilised acrylic cover complete with lamp and internal connection including bracket made of 32 mm dia GI ppe light grade fixed with MS Clamp of suitable size grouted on wall with suitable nos of screws complete all as specified and as directed by Engineer-in-Charge. .
OM SREE MAHADEV TRADERS
BHAVANI PROVISION STORES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .