REPAIR MAINTENANCE AND REPLACEMENT OF STREET LIGHTS FITTINGS PERIMETER LIGHTS INCLUDING HIGH MAST TOWER AND FLAME PROOF LIGHTS AT AF STN BHUJ

Amount

Taking down existing street/security light fittings of any type and any wattage for repair and re-fixing the same after repairs to its orginal position including replacement of cable PVC insulated unsheathed with aluminium conductor of size 1.5 Sqmm (2 runs) upto 1.5 mtr length from street light fitting to LT OH line including connections all as directed. Note : Spares for repairing the street light will be measured & paid seperatly as "supply only" , cost of fixing spares is deemed included in quoted rate in this item.

4x14 watt T-5 street light fitting.

HPMV street light / FLP fittings 250 Watt./ Flamr proof light

Tower light HPMH 400 Watt.

HPMH light fittings/flood light fittings single/ double ended 150 Watt.

LED light fitting 35/40/72/80 watt light fitting

Solar light fitting of any make upto 40 watt.

Medium mast / High Mast /Hanger light HPMH upto 10 mtrs height fitting of 250 Watt.

Supply & fix in replacement of ballast for 2x14 watt T-5 fitting complete all as specified and directed by Engineer-in-Charge.(Make : Havells/Bajaj/CG/Halonix).

Supply & fix in replacement of T-5 14 watts lamp suitbale for 4x14 watt CFL fitting complete all as specified and directed by Engineer-in-Charge (Make : Havells/Bajaj/CG/Halonix).

Supply & fix in replacement of bipin holder 5 Amp suitable for T-5 type, 14 watt lamp complete all as specified and directed by Engineer-in-Charge (Make : Havells/Bajaj/CG/ Halonix).

Supply & fix in replacement of ballast HPMV 250 watts complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG/Halonix).

Supply & fix in replacement of HPMV 250 watts Lamp complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG/Halonix).

Supply & fix in replacement of holder edison screw type for 250 watts HPMV fitting, ISI marked for light fittings of make Cropmton Greaves/Philips/ Havells/ Bajaj.

Supply & fix in replacement of CFL 1 x 11 watt suitable for post top latern make complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG).

Supply & fix in replacement of Metal halide (MH) lamp suitable for 250 watts metal halide fittings, screw type complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG/Halonix).

Supply & fix in replacement of Ballast suitable for 250 Metal halide (MH) flood light fitting complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG/Halonix).

Supply & fix in replacement of Metal halide (MH) lamp suitable for 400 watts metal halide fittings, screw type complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG/Halonix).

Supply & fix in replacement of Ballast suitable for 400 Metal halide (MH) flood light fitting complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG/Halonix).

Supply & fix in replacement of holder edison screw type for 250/400 watts MH flood light fitting complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG).

Supply & fix in replacement of ignitor, super imposed ignitor for metal halide fitting 150 W/250 W/400 W complete all as specified and directed by Engineer-in-Charge.(Make : Philips/Bajaj/ Havells/CG/Halonix).

Supply & fix in replacement of Metal halide (MH) lamp double ended for 150 Watt.complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG/Halonix).

Supply & fix in replacement of Ballast suitable for 150 watts Metal halide (MH) DE flood light fitting for make- Bajaj complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG/Halonix).

Supply & fix in replacement of holder suitable for 150 watts Metal halide (MH) DE flood light fitting for make- Bajaj complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG).

Supply & fix in replacement of In built electronic driver with APFC & THD >15% suitable for LED light fitting of below mentioned watt complete all as specified and directed by Engineer-in-Charge (Make : Philips/Shakti/ Bajaj/Havells/CG).

70-80 Watt fittings

35-45 Watt fittings

Supply & fix in replacement of High efficiency long life CREE LED chip in modules of 30/40/72/80W each (6x5 array) with Ra>75 and lumen efficacy of >95 lum/watt or equivalent suitable forsuitable for LED light fitting of 35/40/72/80 watt complete all as specified and directed by Engineer-in-Charge (Make : Philips/Shakti/Bajaj/ Havells/CG).

70-80 Watt fittings

35-45 Watt fittings

Supply & fix in replacement of solar battery ,12 V- 40 / 42 AH @ SMF battery,including Metal housing for battery (suitable for solar light pole fixing with mounting fixture as clamp, nut bolt etc) fixed on upper side of pole of make : Exide/Amaron/Okaya or equivalent make as approved by GE.

S & F in replacement LED luminaire for solar street light 20 watts, of epoxy powder coated pressure die cast aluminium housing with weather proof gasket and heat resistant tonghened clear glass cover fixed with SS screws, with inbuilt charge controller with auto switch built in for dusk to dawn operation, ingress protection IP 65, suitable for side entry mounting bracket of 50-55mm OD of make Havells cat no. LHKTBJU7PA J018/ NESS or Equivalents

M & L for maintenance of battery including necessay adding of acid,charging and reinstalling to its original position all as directed.

Supply & fix in replacement of 3 pole power contactor ML 4, 70A, 415V Cat No SS90910 of L&T make complete all as specified and directed by Engineer-in-Charge(Make : L&T or equivalent)

Supply & fix in replacement of 3 pole power contactor ML4 , coil of rating 240V Cat No SS91258 of L&T make complete all as specified and directed by Engineer-in-Charge (Make : L&T or equivalent)

Supply & fix in replacement of Street light digital Timer complete all as specified and directed by Engineer-in-Charge (Make : Philips/Bajaj/ Havells/CG/seltech).

M&L for painting of solar street lights including scraping of old painted surface with silver colour aluminium paint including all nuts bolts & street light brackets etc all as directed by Engineer-in-Charge.

S & F in replacement of 35 watt LED street light luminaries comprising of cast aluminium housing, toughned glass, IP 65 and wired with all accessories enclosed with glass cover in frame suitable for 40/50mm ID pipe. Make: Orient/Havells/ Halonix or equivalent.

Supply & fix in replacement of 150W MH flood LED flood light-High Lumen output fitting of 100 Watt with exclusive innivative designed, long life versatile pressure die cast aluminium IP65 flood light luminaire with high power LED as light source complete all as specified and directed by Engineer-in-Charge.Make-Havells/orient/Halonix or equivalant

Supply & fix in replacement of SAIL LED twin type avaiation obstruction light fitting Make-Shakti Cat part no-SZPALMX--2 or equivalent of Crompton Greaves / Bajaj / Philips.

Supply & fix in replacement of SAIL LED single type avaiation obstruction light fitting Make-Shakti Cat part no-SZPALMX--1 or equivalent of Crompton Greaves / Bajaj / Philips.

Supply & fix in replacement of Flame proof LED light-High Lumen output fitting of 40 Watt with exclusive innovative designed, long life versatile pressure die cast aluminium IP65 flood light luminaire with high power LED as light source complete all as specified and directed by Engineer-in-Charge. (Make - Shakti/Shyam/ Balinga/ Bajaj/Sudhir or equivalent)

Supply and Fix in replacement MCB SP 6 to 40 Amps 10 KA all as directed by engineer in charge

Supply and Fix in replacement MCB TPN 63 Amps 10 KA all as directed by engineer in charge

M & L for reparing of flame proof switch / MCB including replacement of switch nob made of ceramic / plastic with proper screw, greasing and replacement of connector all as directed by engineer in charge.

Supply & Fix in replacement 3 pole power contactor ML-1.5,25 A,415 V for high mast light complete all as directed by EIC. Make- SEIMENS/ L&T/ LEGRAND/ SCHNEIDER as approved by GE.

M& L for servicing/taking out of the high mast three pase electic motor for rewinding and rewinding with existing gauge of copper wire complete and the same motor Installaing & testing for smooth working in presence of Engr-In-Charge.

Supply and fix in replacement of 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed 2 core 6 Sqmm cable for sevice connection of secuity lights / aviation lights all as specified and as directed by Engr-in-charge.

S & F in replacement of 100 watt LED street light luminaries comprising of cast aluminium housing, toughned glass, IP 65 and wired with all accessories enclosed with glass cover in frame suitable for 60mm ID pipe. Make: Orient/Havells/ Halonix or equivalent.

S & F in replacement of Emergency bells 215 Volt 50 Hz as per sample at various locations all as specified and as directed.

Supply and fix in replacement of 1100 volts grade heavy duty cable with PVC insulated Copper conductor served with an inner sheathing of PVC tape and overall PVC sheathed 5 core 2.5 Sqmm cable for connection of high mast lights all as specified and as directed by Engr-in-charge.

M/s Bombay Novelty Stores

Jyoti Refrigeration

Ahmed B Khatri

Hi-Tech Systems

M/s Pal Builders

Mohshin Refrigeration & Electrical Services

machine vision plus