RESOURCE MANAGEMENT FOR MAINT OF TROPO TECHNICAL SUB STN, MAIN PUMP HOUSE AND SWIMMING POOL AT DARJIPURA AT AF STN BARODA

Amount

SCHEDULE 'A' PART -I

Resource management of Tropo Tech Sub station including complaint cell, Flood Pump House, of Tropo Technical area with one Electrician for one shift of 8 hrs ( 0900 hr to 1700 hr) including Sunday and holidays for Resource management the installation and attending the complaints received from users complete all as specified and directed.

Tropo Tech Sub station consisting of the following items :-

Two pole structure (incoming) - 01 No.

HT VCB of capacity 400 Amps - 01 No.

Voltage stablizer 150 KVA - 02 Nos.

LT panel (Power House/ Flood Pump house) - 02 Nos.

Transformer of 200 KVA Capacity - 01 No.

Building with inventory and surrounding areas.

Electric pump-motor set centrifugal of 40 HP capacity - 01 No.

Diesel engine of 40 HP capacity - 01 No.

Diesel engine of capacity 6 BHP - 01 NO.

Electric pump-motor set of 5 HP - 01 NO.

Resource management of the swimming pool installation at Darjipura with employment of two FGM/Electrician per day for two shift ie 01 person in first shift with one FGM for IInd shift (Ist shift from 0600 h to 1400h and 2nd shift from 1400h to 2200h) all as directed by Engr-In-Charge.

The swimming pool consisting of the following items :-

Centrifugal pump set with starter capacity 16 LPS - 03 Nos. make - Kirloskar.

Quartz Media filter capacity 60000 Litr/Hr - 02 Nos.

Ionizer unit with copper and silver electrode - 01 No.

Control panel of ionizer unit.

Main incoming LT panel - 01 No.

Bleaching and alum dozer - 02 Nos.

Building with internal electrification and accessories and surrounding areas.

UG sump of capacity 50000 Ltrs - 01 No.

Pool cleaner with PVC flexible pipe and 40 M rope - 01 No.

Resource Management for water supply main pump house at Darjipura installations with one FGM operater in each shift round the clock,24 hours(i.e three shift per day) including sundays & Gazette holidays for operation of pump set and diesel Engine (stand by) including operation of connected valves, maintain equipment in perfect conditions, maintaining proper timing of distribution of water supply, maintaining proper condition of equipments, cleaning of installation and surrounding areas as directed by Engineer-in-charge at pump and consisting of the following:-

Centrifugal pump type DB 80/20 (Make Kirloskar ),2900 RPM, motor- 50HP capacity - 01 Nos.

Centrifugal pump type DB 80/20 (Make Kirloskar ),2900 RPM, motor- 40HP capacity - 02 Nos.

Centrifugal pump type DB 80/20 (Make Kirloskar ),2900 RPM, motor- 25HP capacity - 02 Nos.(for MAP)

Electrical panel board consisting of following (2 Nos):-

Oil immersed starter 50 HP make jyoti- 05 Nos.

Standby diesel engine generator set Capacity 30 KVA, 1500 RPM , 84 BHP complete with panel board, battery 180 AH and battery charger - 01 No.

Standby diesel engine generator set Capacity 35 KVA, 1500 RPM complete with panel board, battery 180 AH and battery charger - 01 No.(for MAP)

Chloronome plant pressure feed, 200 Gms/Hr( Make:- Sweta) - 01 Nos.

Pump house bldg including connected accessories, internal wiring, sluice valves, pipe lines etc.

Note : (Application for item No. 1 to 3)

Negligence of duty during operation of plant off, maintaing of records shall be taken seriously and compensation will be made as per contract procedures.

Contractor shall ensure that no worker shall work more than 48 hrs in a week.

The electrician/FGM shall perform any duties other than the work releated to the contract detailed by JE E/M or AGE E/M when required urgently.

Staff shall always remain on duty & shift staff will not change over the duty unless proper handing taking over is signed.

Operator shall maintain the Log book, chlorine testing book, plant running records book and attendance register should be maintened by contractor duly signed by contractor, JE E/M and AGE E/M.

Installation and complex should be kept clean and tidy in presentable look, otherwise a recovery at the double rate of quoted will be charged if the installation and its complex are not kept clean at the time.

Tradesmen shall take all preventive measures and will use protective clothing of any untoward incidents.

Contractor shall provide all necessary T & P, fuse wire, furniture for using by duty staff.

FGM should be ITI pass or minimum matriculate with three years experience in the trade from reconized government institution.

Electrician/FGM shall operates the Pool cleaner in water Pool and shall do normal daily maintenance/cleaning the pool water with necessary T & P.

The contractor shall ensure that the operator uses the chemicals properly and checks the water quality regularly as per SOP as directed by Engr-In-Charge.

He shall ensure the normal maintenance of DG set/Flood pump like check of water level in radiators, fuel level in diesel tank, cleaning of DG set/Flood pump, cleaning of surrounding area, check of lubricant oil, checking of all spares, checking of output supply from alternator, checking of battery termination and charging the battery.

The contractor shall ensure that the battery is always fully charged, DHPP(N) always balanced in the tank so that the DG set/Flood pump start without delay in the case of breakdown of supply.

The trademen shall use Chemicals carefully for maintained the water quality, checking TDS & records maintained properly.

Contractor shall provide life insurance of min 1 Lakh to all the employed manpower & copy of life insurance shall be deposited with department within one month of acceptance.

No one shall remain absent on duty, if anyone found absent a recovery at the double rate of quoted will be charged .

Contractor shall submit all the documents like, Insurance copy, Educational Qualification, Log book, Attendence Register, Absentees Register, EPF/Service Tax details while claiming the pays of RARs and Final bill. No payments shall be entertained by the dept in the absence of the above said documents.

SCHEDULE 'A' PART -II

Supply only alum for filtration of water of swimming Pool , confirming to the relevent ISI marked complete all as specified and directed.

Supply only copper sulphate for pool water, confirming to the relevent ISI marked complete all as specified and directed.

M&L for removal of existing materials in Quartz sand filter such as silica sand(0.35mm-0.60mm), pabbels(0.6mm-1.0mm) of various size and supply and lay all fresh materials such silica sand, pabbels of size 1 to 3mm, 3 to 7mm and various size as per site and all as specified and directed by Engr-In-Charge. Note: (i) Replacement of materials of quartz filter shall be done by proper authorised/registerd supplier. Make: UV Rich or equivalent. (ii) Contractor shall remain responsible for proper quality of filtered water for next one year. If filter found not working properly, the work to be redone by contractor without any extra cost.

Material and labour for Pool cleaner brush suitable size as required for cleaning at shallow side and deep side with suitable length handle of brush complete all as specified and directed byof make.Make UV Rich or equivalent.make approved by GE

Supply only NEO-CHLOR-90 (TRICHLOROISOCYNAURIC ACID DRY TYPE) for chlorination of swimming Pool, ISI marked complete all as specified and directed..

Supply and fix in repairs fiber brush for suction sweeper of suitable size as per site for cleaning of swimming poo lcomplete all as specified and directed . MakeUV Rich or equivalent.make approved by GE

M & L Nylon rope for Pool cleaner size of 15 mm dia, ISI marked complete all as specified and directed..

S & F in repairs of PVC flexible pipe (heavy duty) of size 50 mm dia for Pool cleaner, ISI marked complete all as specified and directed..

Supply & fix in repairs 80 mm dia SS Spindle CI sluice valve 1.6PN, long body, confirming to IS- 14846 : 2000.rubber diaphram) Complete and testing all as specified and as directed by the Engineer-in-Charge of Make :- KIRLOSKAR/LEADER/AUDCO

Supply net with frame and handle structure ISI marked complete for picking up floating leaves and small insects all as specified and directed by Engr-In-Charge.

Material and labour for cleaning of water by means of muratic acid or PH booster to maintain the PH of water at desired level and by using chlorine or whatever is required to maintain the pool water upto the approval of user and MES requirement of quality of water all as specified and directed by Engr-In-Charge.

Supply and fix in repairs suction sweeper of suitable size as per site for cleaning of swimming pool complete with connecting accessories for proper functioning of sweeper and making working it complete all as specified and directed of Make UV Rich or equivalent.make approved by GE

M & L for preparation/cleaning of old painted steel surfaces of any description such as suction line, delivery line, priming line, valves and Quartz sand filter complete with scraping out old painted surface and after that marking of flow direction along with two coats of synthetic enamel painting complete all as specified and directed .

Supply and fix in repair of pressure guage, range 0-100 PSI SS bourdon type 4", bottom connection 1/4" or 3/8" BSP(M) complete as in repairs all as specified and directed.

M&L for repairing and servicing of leakages/blockage at flanges at various joints such as near pressure guage, motor, pipes and at various location inside Swimming pool plant premises by means of opening from joint and replacing flanges of required size and length complete with teflon tape and other accessories complete clearing of leakage all as specified and directed by Engr-In-Charge. Note: (i) Complete clearing of leakage at various locations of plant shall be considered under one job. (ii) Any spares other then flanges or teflon tape/ packings/gaskets etc shall be measured and paid under respective item.

Supply and fix in repair of following parts for existing centrifugal pump set electric driven 3 phase 415 volt 7.5 HP having discharge 60000 LPH.

Motor cooling fan of existing make

Pump motor MS coupling

Cover bolts & washers

Pump bearing Make : SKF/UBC/TATA/FAG/ NBC

CI impellar suitable for existing pump set.

SS Sleeve (Gland Sleeve)

Pump shaft with studs and nuts for pump body.

Starter relay Make- L&T/SIEMENS or equivalent.make approved by GE

Magnet coil

Motor bearing Make : SKF/UBC/TATA/FAG/ NBC

Contactor coil for starter. Make- Havells/L&Tor equivalent.make approved by GE

25A 2P Contactor for starter. Havells/L&T or equvalent.

Supply only hydro chloric acid LR type suitable for swimming pool water complete all as specified and directd.

S&F in repair of star delta centrifugal pump starter 7.5 HP 415V 3 Phase complete all as specified and directed. Make- Havells/HPL/Jyoti

Supply and fix in replacement of CI foot valve ISI marked of size 80 mm dia for under ground sump suction CI/ GI line including nipple of suitable size, welding, connection and testing complete all as specified and as directed.

Disconnecting unbolting and taking out existing monoblock pump set of 7.5 HP capacity, electric driven 3 phase 415volt including Re-fixing in the same position after repair with necessary screw and bolts complete all as specified and directed.

Rewinding of following centrifugal pump (Motor) 3 phase 415 volt with super enamelled copper rewinding wire of suitable size/gauge and providing insulation including taking out the existing winding, varnishing, heating, testing complete all as required for completion of job complete all as specified and directed.

K A ELECTRIC CO

LAXMI CORPORATION

Gayatri Associates

Shiv Projects

Shiv Kripa Tradimg