Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.6 CrAccepted-AOC | ₹2.6 Cr | 1 | Accepted-AOC AOC |
| 2 | Rejected-Technical 11 30 | PITHORAGARH | UTTARAKHAND | 262501 | - | - | Rejected-Technical REJECT |
Tender Value
₹2.6 Cr
EMD Value
₹5.1 L
Closing Date
12 Sept 2022, 5:00 pmClosed
EXECUTIVE ENGINEER
Uttarakhand Jal Sansthan L block new tehri
Construction of all civil and E and M Works on Laloor pumping water scheme under JJM
2022_UKJS_48885_1
1536/E-Temder-JJM/2022-23/59 Dtd 25.08.2022
Open Tender
Civil Works - Water Works
Item Wise
365 days
Block jaunpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,900
EXECUTIVE ENGINEEER UTTARAKHAND JAL SANSTHAN
₹5.1 L
NEW TEHRI
30 Sept 2023
2 Sept 2022
13 Sept 2022
2 Sept 2022
12 Sept 2022
7 Sept 2022
5 Sept 2022
Construction of Distribution System, CWRs, Feeder Main, Service CWRs,and Electrical & Mechanical Work etc under Laloor Pumping Water Supply scheme
Excavation in soil mixed with single boulders etc. requireing the use of specials T&P, if any for pipe line trenches including lift up to 1.50 M. & lead up to 30M. With back filling, watering , ramming of excavated earth in the trenches.
Providing, Supply and Carting, laying jointing fixing and testing of G.I. screwed pipe with specials in trenched (including cost of jointing materials like white lead, hemp and oil etc.) testing of pipe (medium quality) including cutting and threading etc. complete.
15 mm dia.
20 mm dia.
25 mm dia.
32 mm dia.
40 mm dia.
50 mm dia.
65 mm dia
For CWRx in Rural Areas
Supply of all materials, labour & T&P etc. and construct RCC CWR of following capacities ( in Kiloliters) with M.S. ladder ouside & inside of the tank, M.S Mh.H cover with locking arrangement, supply and fixing of outlet, inlet, over flow and wash out puipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with apporoved water proofing (apex)/enamal paint, testing, filling water for testing purpose etc. including supply of verticval pies and specials, assuming bearing capacity as 8MT/M2
Protection work for pipe line including supply of all materials, labour T&P etc. complete
Random Rubble masonry laid 1:6 for Source & pipe line protection
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:
P.C.C. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Supply of all materials, labour, T&P etc and construct wheel valve chambers as per type design (0.40x0.45m)
Supply and fixing of the following fittings including cartage of materials, labour, T&P etc. complete.
G.M. Gate valve class-1 with hand wheel ISI marked conforming to IS:778/1984 (Reaffirmed 2000) for water purpose.
20 mm dia.
25 mm dia.
32 mm dia.
40 mm dia.
50 mm dia.
65 mm dia.
Making connection with the existing M.S. Galvanised mains of upto 25mm nominal dia, including cutting and threading of pipe, bailing out water, fixing if required, specials and testing etc. complete, but excluding cost of insertion pipes and specials besides boring out (and also subsequent back fill) existing main.
Providing and fixing C.P. brass biv cock of approved quality conforming to IS:8931
C.I. mouth , brass ferrule 15 mm dia
E&M Work
Intake Well
SITC of Submersible Pump with discharge capisity 620 LPM Head 28 Mtr,RPM-2900 and motor of suitable capacity for this pump.
MPS (Naingaon) SITC of Energy Efficient Centrifugal pump with discharge Capacity : 580 LPM, HEAD 317, 2990 RPM and motor of suitable capacity for this pump with the following specifications: Suction casing material-CI,Casing-WCB,Stage Casing-CI,Impeller-Bronze,Shaft & Sleeve-SS-410
IPS 1st (Naingaon) SITC of Energy Efficient Centrifugal pump with discharge Capacity : 540 LPM, HEAD 470, 2990 RPM and motor of suitable capacity for this pump with the following specifications: Suction casing material-CI,Casing-WCB,Stage Casing-CI,Impeller-Bronze,Shaft & Sleeve-SS-410
IPS 2nd (Bhutgaon) SITC of Energy Efficient Centrifugal pump with discharge Capacity : 470 LPM, HEAD 317, 2990 RPM and motor of suitable capacity for this pump with the following specifications: Suction casing material-CI,Casing-WCB,Stage Casing-CI,Impeller-Bronze,Shaft & Sleeve-SS-410
IPS 3rd (Ashadthat) SITC of Energy Efficient Centrifugal pump with discharge Capacity : 270 LPM, HEAD 252, 2900 RPM and motor of suitable capacity for this pump with the following specifications: Suction casing material-CI,Casing-WCB,Stage Casing-CI,Impeller-Bronze,Shaft & Sleeve-SS-410
Fully Autometic Auto transformer Starter
MPS (Naingaon)
IPS 1st (Naingaon)
IPS 2nd (Bhutgaon)
IPS 2nd (Bhutgaon)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .