REPAIR,REPLACEMENT OF MISC BR ITEMS ALONGWITH REPAIRS TO DOORS,ROLLING SHUTTERS, GALVALUME SHEETS,FLOORING,PLASTERING AND MISC WORKS IN HANGER, STORAGE ACCN IN TECH AREA AT AF STN BHUJ

Amount

Demolition of PCC block masonry built in cement mortar all as specified

M&L for providing precast cement concrete block masonry type 1:5:8 using 20mm graded aggregate with solid blocks, exc 10cm in width and setting in CM 1:6 complete

M&L PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in coping, bed blocks etc including necessary form work complete

Rough excavation n exc 1.5 m deep and getting out any type of soil

Removing excavated material exc 500m but n exc 1.5km and deposited where directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc 30cm thick, watering,ramming/rolling and finishing to required size, shape etc n exc 1.5m high from base (Note : lead for earth 500m)

Item No 6 above but exc 1.5 m high not exc 3.00 m from base.

Item No 7 above but exc 3.0 m high not exc 4.50 m from base.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

15mm thick cement plastering in cement mortar 1:4 stone or concrete surfaces of wall finished fair and even without using extra cement,complete all as specified and directed.

10mm thick cement plastering(in two layers each layers thickness is 10mm) in cement mortar 1:6 on fair faces of stone work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new or previously untreated concrete/plaster surfaces and applying two coats of exterior emulsion paint (in camouflage pattern) as approved by the GE over a coat of primer all as specified and directed by EIC using any one of following material :- Make Brand Nerolac Suraksha Asian ACE Berger Walmasta

M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of Birla White Putty by finishing the surfaces even and smooth complete all as specified and directed by EIC.

Supply only integral water proofing compound complete all as specified & as directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting,any gauge,thickness incl.Nanital or similar patternroof coverings.

S & F Galvanized corrugated mild steel sheeting 0.63mm thick with two corrugations side lap of class 8 fixed with L type or J type hooks bent to a curve all as specified and directed.

0.63 mm thick Galvanized corrugated mild steel sheeting with two corrugations side lap of class 8 fixed with L type or J type hooks except sheeting fixing only all as specified and directed.

S & F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified

Dismantling of unserviceable wrought iron or mild steel of any desription not other wise provided for complete as directed .

M&L for rolled sections as in main and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails and guides for slinding doors, fixed with angle cleats or other connecting plates to Fe-290 (Gde E-165)

M & L for preparation of new steel surfaces and applying two coats of syanthetic enamel paints over a coat of red oxide primer of any girth & any description over 10cm in width or girth,not otherwise described complete all as specified & directed by EIC.

preparing old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed.

M & L 75mm thick PCC (1:2:4) type B-2 (using 20mm graded crushed stone aggregate), surfaces finished even and smooth without using extra cement

M & L for cement concrete Type D-2, 75mm thick 1:4:8 (using 40mm graded aggregate) for sub base flooring.

Forming dummy joints 65 mm deep X 10 mm wide filled with sealing compound grade 'B'

S&F 60 mm thick (M-25 mix) glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm copacted sand bed, size & pattern of tiles all as directed by Engineer-in-Charge.

S & F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped,wired and laid in position,including closing after filling all as specified

Taking down carefully un-serviceable/old rolling shutters of size exceeding 5 Sqm but n. exc 10 Sqm each, gear operative/pull or push type type for replacement of un-serviceable/defective parts, denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling to make the system smooth/easy functional, repair to locking arrangements including supply and fix new nuts & bolts of existing size by removing old/rusted nut and bolts wherever required, necessary welding wereever required as directed, giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work carried out complete all as specified and as directed by the Engr-in-Charge.

All as per serial item above but of size exc 10 Sqm n. exc 20 Sqm each.

All as per serial item No above but of size exc 20 Sqm each.

S & F 530mm long helical wire spring ‘O’ gauge for electrical operated rolling shutter.

S & F 450mm long helical wire spring.

S & F 300mm long helical wire spring.

S & F ball bearings of size 50mm (Inner Dia).

S & F cast iron gear set for mechanically operated rolling shutters thickness of laths 1mm.

S&F in repairs 1.00mm thick M.S. sheet hood covers bent to shape to match with the existing bracket welded with angle iron 25 X 25 X 3 mm on both sides and painted with two coats of aluminium paint over one coat of red oxide primer.

Repairs to collapsible gates removal, replacement of wom out minor spare parts such as rivets, roller wheels, straightening of vertical channels and cleaning of rust including greasing for smooth functioning including applying one coat of synthetic enamel paint complete all as specified and as directed.

Repairs to aluminium doors/windows by cleaning, greasing and easing for smooth functioning including replacement of unserviceable fittings for the following:- Note:Spare parts if required shall be measured and paid separately under respective items.

(a) Doors of any size

(b) Windows of any size.

supply only rubber beading suitable aluminium doors and windows

Repairs to existing Steel windows shutters with proper alignment for easy opening and closing including replacement of unserviceable fittings such as handles,peg stay, projecting type hinges. Note:Spare parts if required shall be measured and paid separately under respective items.

S & F Mortice lock above 4 levers any size all as specified

Supply and fixed in reparis Double action floor spring hydraulically regulated made up to minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty for aluminium doors all as specified and directed.

S & F only mild steel mortice lock of size 100mm, 4 levers.

Supply only Butt hinges of size 100mm , extruded aluminium alloy with galvanised mild steel hinge pin, anodised , type B-21

Supply only MS handles of size 150mm suitable for MS windows

S&F 4.0 mm thick ordinary glass fixed in aluminium windows/door/partions

S & F for Collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top and bottom unners, brass handles etc, as specified erected in position and securing runners with holdfast and brackets complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F mild steel work in tubular trusses/structures of square/round/ rectangular pipes, rafters, purlins including special shaped washer etc. complete using ERW or inductuin butt welded tubes confirming to IS-1161-1998 grade St-240 including notching, drilling, fitting, rivetting and or welding or connecting bolts and nuts, cleats, gusset plates etc complete all as specified and as directed.

S&F mild steel for wind ties for roof including securing bolts ,incuding cutting tops to shape as directed , drilling holes and similar works conforming to Fe-290 Gde E-165

M & L for preparation of new or previously un treated steel and iron surfaces over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome on steel and iron surfaces all as specified and directed.

Dismantling of plain or corrugated Abestos cement sheeting , any gauge , thickness roofing covering .

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coverimg/ cladding to wall, fixed with self tapping screws as specified.

S & F coloured galvalume ridges,corner piece,barge board,window flashing etc, 0.50 mm thick, fixed with L or J type,special screw or crenked hook bolts in roofs , walls etc.

Demolition of cement concrete any description any thickness and any position complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6, by using 40mm graded aggregate in plinth protection

M&L for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles.

M&L 60 mm thick (M-25 mix) glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm copacted sand bed, size & pattern of tiles all as directed by Engineer-in-Charge.

M &L Sand cushioning under floor/ tiles 30mm thick complete all as specified

S&F 6mm thick tinted glass as approved by GE, fixed to existing aluminium door/ windows including hacking out existing glass and provn of rubber beading.

Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads.

Taking down Chowkats or frame exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), all as specified.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge

100mm size PVC butt hinges complete all as specified and directed

150mm size PVC handles complete all as specified and directed.

200mm long PVC tower bolt complete all as specified and directed.

M&L100 mm thick for PCC 1:2:4 type B2 (using 20mm graded aggregate) as in path/ hard standing finishing smooth without using extra cement complete all as specified.

M&L100 mm thick for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in path/ hard standing complete all as specified.

Forming contraction (Dummy) joints 65mm X 10mm wide, filled with sealing compound Gde 'B' for key scrubbing down with water etc.

Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises

Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.06sqm but n exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B-1 using 20mm graded crushed stone aggregate,complete all as specified and directed

Door closer Aluminium Die cast hydraulically regulated designation No 3, universal type, suitable type for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedNo 3 universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 kg and fixed all as specified

divyarsh entrprise

ABHOG INFRASTRUCTURE PRIVATE LIMITED