SPL REPAIRS TO BUILDING NO P 53(MES BHUJ) AND P-184 OTM 6 RAJFRIF (COOK HOUSE) AND CERTAIN REV/MW WORKS AT MIL STN BHUJ

Amount

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L vitrified ,coloured and printed tiles of size 600 mmx600 mm x 9 to 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and pointed in white or coloured cement to match with the colour of tiles, with all possible design combination as specified by Engr-In-charge complete all as specified and directed.

M&L vitrified ,coloured and printed tiles of width as directed and 9 to 10 mm thick as in skirting fixed over and including 10 mm thick cement backing coat in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles with all possible design combination as specified by Engr-In-charge complete all as specified and directed.

Roughening surfaces of old concrete floor by picking , sweeping cleaning and washing down with water to remove dust etc. Complete all as specified and directed

M&L Coloured Glazed Ceramic tiles (Digital Designer tiles) 300 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 with all possible design combination as specified by Engr-In-charge complete all as specified and directed by Engineer-in-Charge..

M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M & L for sunken portion treatment of toilet/bathrooms (area not exceeding 1.50 sqm and depth not exc. 0.60mtr) cutting of existing tiles, demolition of pvc ,removal of pvc material ,taking out of old floor trap/Nahni trap and then cleaning ,drying of internal surface ,application of water proofing membrane 3mm thick after plaster and prime coat .Provision of waste pipe by drilling hole and provided 25mm pvc pipe .place new floor trap/Nahni trap of 100mm size with grating ,connect trap with outer sir pipe by proper jointing /sealing with approved material and filling pvc in gap and making good sunken floor after all connections with pvc and tiles ,all as specified and directed

S&F in repair Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed.

M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expansion joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Taking down chowkat or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store

Taking down chowkat or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store

M & L for powder coated ( minimum thickess of powder coating 50 micron) alumiium frame for slidig widows with two or more channel icludig joiing cleat for fixing etc .complete all as specified and directed

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e.. handles, barrel tower bolts, hinges etc, powder coated aluminium snap beading, screws etc. complete, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : (i) Making all edges i.e. cill and jamb good by cement mortar 1:3 (ii) Frame channel will be paid sepreatly.

M & L powder coated aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 9mmX9mmX1mm all as specified

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

S&F in repair Vitreous China, wash down water closet pan "Pedestal pattern" white including P TRAP OR S TRAP and connection to drain and to flush pipe(flushing cistern include) and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified.

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified

S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S & F in repair for plate rack made out of 1 mm thick stainless steel of size 75 Cm X 75 Cm X 25 Cm with all internal fittings and compartments/ partitions all as per sample B-346 Of Prayag all as specified and directed.

S&F in repair CP brass Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges fitting with 15mm dia pipe three in one use complete all as specified and directed

S&F (concealed / open) 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 15mm bore..

S&F (concealed / open) 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 20mm bore.

S&F (concealed / open) 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 25mm bore.

S&F (concealed / open) 40mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 40mm bore..

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.

S&F 110 mm bore PVC (SWR) pipes ISI marked Type B single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed

S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110mm bore, complete all as specified and directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

S & F in repairs PVC mirror cabinet with front mirror, size 330x430mm minimum 5 compartment all as per sample kept in GE office. Make : (Make : Prayag Cat No 551 or equivalent design) PRAYAG/Polytuf/Sintex

S&F in repair for shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs.

S&F in repair PVC (SWR) Nahni trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .

S&F in repair Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified

S&F in repair Stop valves fancy type chromium plated with long shank and cup (concealed type) Stop valves, ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified

S&F in Repair Chromium plated Brass 60 cm long Tubular towel rail complete all as specified.

S&F in repair soap dish & holder , colour chrome, brass holder fittings fancy type complete all as specified and directed

S&F pillar taps in repair of cast copper alloy with capstan heads chromium plated screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type

S&F stainless steel health faucet with 1 Mtr tube and hook complete all as specified and directed by Engr-in-charge. Confirming to Cat part No F8030103 of cera or equivalent of jaguar/Kingston completed all as specified

S&F in repairs heavy duty Stainless steel (Grade 305) curtain rods 20 to 25mm dia.

S&F in repairs Stainless steel (Grade 305) brackets (Open ends) suitable for curtain rods of 20 to 25mm dia

S&F in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 20 to 25mm dia

S&F in repairs Stainless steel (Grade 305) supports suitable for curtain rods of 20 to 25mm dia

Demolition of Concrete (Reinforced) in chajjas ,staircase, landing and other suspended portion at any height, complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celling etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls, finished even & smooth without using extra cement

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces/stone masonry and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on walls

M&L for preparation of newly plastered surfaces of walls & applying 2 coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

S&F in repair sinks with drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed .

Dismantling of stone slabs and tiles (Kota stone etc.) of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick as in floor laid and jointed with grey cement slurry mixed with pigment to match with the shade including rubbing and polishing over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in cooking platform, Jambs cill and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed.

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels commenrcial face on bath sides with lipping/frame to match complete all as specified and directed.

M & L for 30 mm thick glazed and skeleton shutters of 2nd class Hard Wood(Not less than Hollock wood) local made shutter, open rebated and prepare to revive glass, gauge etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.24 (a) supplied and fitted to chowkat complete all as specified and directed.

M&L preparation of the new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 100 mm long butt hinges stainless steel medium weight and fixed to wooden or PVC frame fixed in repairs by stainless steel screw as directed by Engr-in-Charge.

S&F aluminium handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying three coats of white wash on walls

M&L for preparation of old plastered surfaces and applying three coats of white wash on ceiling

M&L for preparation of newly plastered surfaces of walls & applying 2 coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L Complete removal of existing treatment of wall and Finishing walls with Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete

S & F stainless steel kitchen plate rack size 750 x 600 x 250 mm & 0.63 mm thickness of grade AISI 304 incl suitable arrangements for hanging to wall

S&F mild steel angle iron work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165)

S&F 30 mm thick flush shutter , Solid core , construction with particle board core and plywood face panels commercial type on both sides.

M&L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats.

M & L painting to wood and wood based surfaces of any description exc 10 cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated surface all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as per specifications and as per drawing shown on sl page No 150 of SSR part II (for item-884)

M&L Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, 300mm size

S&F Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size

S & F 200mm size aluminium anodised, barel tower bolt of extruded section.

S & F 150mm aluminium alloy handles, fabricated type anodised

M&L providing precast reinforced cement concrete type B 0 1:2:4 (using 12.5 mm graded stone aggregate) as in louvers and jallies 35 mm thick (measured solid) including all mouldings but excluding frames set in cement mortar (1:4) all as spd and directed (including reinforcement )

M&L Preparation of old surfaces of steel of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and fair without using extra cement (ht of bldg up to 4m)

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement.

M&L for preparation of old surface of walls (plastered/ unplastered ) and applying two coats of white wash to ceiling leaving premises clean and tidy all as specified and directed by the Engineer-in Charge.

Complete removal of existing treatment on walls.

M & L aplying 3 mm thick wall care putty on wall.

M & L applying two coats of distemper oil emulsion, white or tinted over a coat of primer on wall complete all as specified and directed

complete removal of existing treatment and M&L two coat of cement base paint on old /new surface including one coat of primer on walls. (note : chhajja and roof facia shall be in different colour)

S & F Rotational moulded polythelene water storage tank 500 Ltr (Cylindrical vertical with closed top) hoisted and fixed in position all as spd.

S&F in repairs vitreous china squatting pan Orrisa pattern of size 580X440mm white with CI `p' or `s' trap front or bach inlet and foot rests any pattern (excluding cistern and flush pipe) in repairs complete including lime concrete bedding all as spd & directed)

S&F in repairs PVC valveless 10lts capacity syphonic action type flushing cistern low level, white with inlet, ball valve float and handle including brackets and pvc waste pipe 32mm dia all as spd & directed

S &F in repair vitreous china wash basins flat back size 550 x 400mm including cutting for and pinning in ends of brackets or errecting stand , PVC connections 15mm size with PTMT nuts of length 600 mm

S&F in repair sink made of stailness steel 1mm thick kitchen with plugs, eashers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, bowl size 410mmx330mmx160mm

S&F 15mm dia stop valves , fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions and fixed in repair

S&F PTMT square grating with side hole 150mm size for trap in repairs

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified or directed by the EIC

M & L 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) including necessary form work as in flooring, surface finished even & fair without using extra cement complete all as specified.

S& F mild steel welded fabric of weight exe 3.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified.

Supply only integral water proofing compound

S&F soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmX150mmX100mm

M&L for surface dressing soft/ loose soil n exc 15 cm deep

M&L Excavation in trenches, not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. of soft/ loose soil

M&L Excavation in trenches, not exceeding 1.50 meter wide and not exceeding 3 meter in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not of soft/ loose soil

Material and labour for Cement concrete in foundations, filling and mass concrete type D2(1:4:8) using 40 mm graded stone aggregate including compaction of concrete, curing etc. complete.

M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/ loose soil.

M&L Form work to sides of concrete foundations, foottings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar works; vertical or to batter for rough finished surfaces.

M&L RCC M-25 in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc; basement slabs, under reamed piles and mass concrete.

M&L TMT bars 10 mm dia and over cut to length bent to shape required including cranking,bending,spirally for hooping and binding with and including mild steel wire anealed not less than 0.9 mm dia

Ditto but 5 mm dia and over up to and including 10 mm dia in stirrups spacers and binders

Form work to sides of pillers, posts, struts, piers, columns and stanchions for rough finished surfaces.

M&L for Reinforced cement concrete (design mix M-25) in columns, pillars, piers, posts and struts.

M&L for Reinforced cement concrete (Design Mix, M-25) in beams, cantilevers, bressummers, lintels over 1.50 meter span

Reinforced cement concrete (Design Mix, M-25) in Chhajha

M&L for Brick work with Fly Ash Bricks,straight or curved on plan exceeding 6 meter mean radius buil in cement sand mortar 1:6 including curing,racking of joints etc.complete in all rescpect.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels cantilevers, shelves including supports, overhungs etc. also splays between floors and beams etc. as in rough finished surfaces.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works not exceeding 200 mm thick (Horizontal or slopping)

Reinforced cement concrete (Design Mix M-25) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

S & F for anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydraulic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminated particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 As in Internal wall

Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM 1:3 As in Celling

Rendering 15mm thick on fair faces of brick work or concrete surfaces,10mm in CM 1:6 and 5mm in CM 1:4 as in Extarnal Wall

M&L for preparation of new plastered surfaces and applying two coat of OBD over primer

M7L three coat of white wah in Celling on new surface

M&L for preparation of newly plastered surfaces of walls & applying 2 coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

PCC for 25mm thick (1:2:4) Type-B0 using 20mm geaded aggregate

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 75 mm thick, watered and rammed to a true surface

PCC for 50 mm thick (1:3:6) type D-2 using 20 mm graded stone aggegate

Material and labour for treating the soil under plinth protection at the rate of 5 liter of emulsion per square meter of surface area.

Material and labour for anti termite treatment along top surface of filled earth at rate of 5 litr per sqm

M&L Treating the back fill in contact with foundation at the rate of 7.5 liter of emulsion per square meter of vertical surface (Area of the sub structure in contact with back fill to be measured).

M&L Treating the soil along with external perimeter of building at a rate of 2.25 litr of emulsion per meter of perimeter of wall

M&L removal of excavated soil n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point

Surface Excavtion n exc 30 cm deep and average 15 cm deep and getting out soft/loose soil complete all as specified and directed

M&L for sand cushioning under interlocking tiles including watering and consolidtion complete all as specified and directed.

M & L Machine pressed precast concret interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658- 2006 of 60 mm thickness M-35 grade complete all as specifed and directed by Engr-in- charge.

Removing excavated material exc. 1.5 Km and depositing where directed at a level n exc. 5 Km above the starting point complete all as sspecified and directed by Engr-in -Charge.

M&L nonskid ceramic tiles in floor surface and in skirting 400 x 400mm , set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick screed bed of CM 1:6.

M&L rendering 15 mm thic in CM 1:4 on PCC block masonry brick work or concrete surfaces to be finished even and smooth.

M&L preparing new plastered surfaces of wall & apply three coat of white wash over a coat of lime putty cpmplete all as specified and directed.

Pre-cast cement concrete block Type C1 1:3:6 (20 mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete

m&L two coat of synthetic enamel paint over 10 cm width or girth,not otherwise described over a coat of redoxide on new surface incl preparation

Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface.

S&F Roof trusses (framed) trusses purlins and fastening (etc.,angle, channel,tubular section,round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed. Note: Rate inclusive of all bending curving of steel sections as per site requirement as directed by Engineer In charge

S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.

Excavation in trenches not exc 1.5 mtr depth for foundation etc n.exe 10sqm on plan in and getting out in hard dense soil.

Removing excavated material soil n.exc. 500m and depositing where as directed

S & F 125 x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

100mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed

200 mm long 10 mm dia Al tower bolt

150 mm long Mild steel pressed handles, oval type, stove enamelled black

150mm Long, 16mm Dia Alu. Aldropbolt

M&L RCC Beams, cantilevers, bressummers, lintels Type B1 1:2:4 20 mm graded aggregate

M&L Brickwork in burned heat resistant brick with subclass B’ bricks straight or curved on plan n exc 6 m mean radius with CM 1:4

M&L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) with smooth finish without using extra cement (70 mm thick) in floors

M&L Cement concrete coping work Type B0 1:2:4 12.5 mm graded aggregate

Framed work as in doors or gates or partition or for sheet cover of angle or other sections with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, welding etc. to be prepared for hanging or sliding with and including either hooks and hinges or handle and hooks steel hanging door fittings inclusive of steel sheeting or other covering, running rails and guidesand hanging; also fastening and fixing complete

Supply and fix hinges, heavy weight, cold rolled mild steel size 40mm x6mmx220 mm long

M&L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete.

Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm long

Supply and Fixing of MS plates steel 10mm thick gde Fe 450-S cut to size square.

Supply and Fixing of MS plates steel 10mm thick gde Fe 450-S cut to size square.

Supply and Fixing of Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit pipe of adequate size concealed type with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with modular type white plate with suitable brass screws and cup washers

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No. 171 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

S&F switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed.

S&F switch socket outlet five pin, 5 Amps, flush type, 230 volts AC circuit complete all as specified and directed.

S&F switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular fan regulator 120 W 2 module complete all as specified and directed.

S & F buzzer, ding dong AC 230 Volt single pole complete as specified.

S&F fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including three core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED lamp fitting complete all as specified and directed.

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 2.5 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc for laying of cables, erection of poles, struts/ stays etc not exceeding 10 sqm on plan and getting out in soft loose soil.

Returning, filling in, including spreading leveling watering and well ramming in layers not exceeding 25 cm in any type of soil.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils.

M & L for sand filling in trenches for cushioning of LT cables punning after filling complete as specified and as directed. Note: Punned thickness shall only be measured and paid

Supply and lay un-reinforced precast concrete cable cover , class , LV , Type I flat size 250 x 150 x 40 mm laid dry in treches over under ground cables.

S & F GI pipe, light grade, of size 50 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection .

Supplying ,Laying, jointing and testing new XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed of size 4 core 16 sqmm complete all as specified and directed

S & F sheet metal enclosure powder painted for MCB DB SPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, BEE 5 star rating complete all as specified and directed

Supplying ,Laying, jointing and testing new XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed of size 2 core 10 sqmm complete all as specified and directed

M/s Bombay Novelty Stores

Sanjay Enterprise

Gayatri Construction Co