Loading…
Loading…
Tender Value
₹1.7 L
EMD Value
₹1,700
Closing Date
8 Jun 2026, 4:15 pm3d left
Deputy Executive Engineer Bhuj Electrical R & B Sub Division, Bhuj
Addition and Alteration to E.I at Samras Girls Hostel at Bhuj, Ta-Bhuj, Dist-Kachchh.
309745
03 of 2026-27
Open
Electrical Works
Kutch
7 documents required · 7 mandatory
₹600
Deputy Executive Engineer Electrical R and B Sub Division Bhuj
₹1,700
1 Jun 2026
1 Jun 2026
1 Jun 2026
8 Jun 2026
1 Jun 2026
Name of Work :- Addition and Alteration to E.I at Samras Girls Hostel at Bhuj,
Ta-Bhuj, Dist-Kachchh.
Rate at which the
materials will be
Sr. No. Quantity Particulars charged to the
Signature of the Contractor Deputy Executive Engineer
Electrical R&B Sub Division
Name of Work :- Addition and Alteration to E.I at Samras Girls Hostel at Bhuj, Ta-Bhuj, Dist-Kachchh.
Quantities Estimated Rate
may be more or Description of Item.
No. In Figures In Words according
1 30 Ea. Replacing old and u/s by Providing following type of Modular Type 398.95 Rupees Three
Accessories mounted with PVC / metallic/Wooden box, single Hundred Ninety
mounting base frame covered with textured / metallic/white front Eight And Paise
plate , modules erected with necessary connections as per site Ninety Five Only
situation directed by Engineer In charge.
(5) Electronic hum Free steps EME Fan regulator
2 100 Ea. Replacing old and u/s by Providing & erecting following type of 27.27 Rupees Twenty
Modular Type Accessories with necessary connection. As desired Seven And Paise
by Engineer In charge Twenty Seven
(1) 6 Amp. SP one way switch Only
3 30 Ea. (4) 6 A socket 42.42 Rupees Forty Two
And Paise Forty
4 50 Mtr. Providing and erecting Mains with 1.1 KV grade FRLS PVC 82.82 Rupees Eighty
insulated ISI marked stranded Copper conductor wire in following Two And Paise
type of pipe to be erected concealed in /flushed on wall/ceiling, Eighty Two Only
with 1.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size
(D) Partial PVC pipe and drops in oval conduit / PVC casing
(b) 2 wire 2.5 sq. mm
5 2 Ea. Providing & erecting Switch board for Computer or electric 1133.22 Rupees One
apparatus consisting of following modular type accessories Thousand One
mounted with PVC / Metallic concealed/open box with single Hundred Thirty
mounting base frame covered with textured/metallic /white front Three And Paise
plate,modules erected with necessary connections as directed Twenty Two Only
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug
For Modular Type Accessories
6 60 Ea. Replacing old and u/s by Supplying and erecting LED indoor 373.70 Rupees Three
fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on Hundred Seventy
single MCPCB, with housing used as a heat sink shall be made of Three And Paise
thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast Seventy Only
powder coated and high U.V. & corrosion resistance with diffuser
with company mark/name 160V to 270V, Power Factor more than
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Tube Light with integral driver
(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet
7 50 Ea. Supplying and erecting led lamps with following wattage capacity 188.87 Rupees One
of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in Hundred Eighty
built-surge protection,Polycarbonate diffuser, mounting suitable for Eight And Paise
E14 / E27 / B22 lamp holders, pf >= 0.5 Eighty Seven Only
(A) LED Lamps integral type, with PC diffuser suitable LAMP
(iii) 10 to 15 watts
8 20 Ea. Replacing old and u/s by Supplying and erecting LED indoor 758.51 Rupees Seven
fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on Hundred Fifty
single MCPCB, with housing used as a heat sink shall be made of Eight And Paise
thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure Fifty One Only
die cast powder coated and high U.V. & corrosion resistance with
diffuser housed in aluminium casted body with company
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount Downlight
with provision for spring loaded mounting clips complete.IP20
(iv) 22-24 watts, Surge-2 KV
9 50 50 Replacing old and u/s by Providing & erecting Approved make 1982.63 Rupees One
Ceiling Fan with double ball bearing with Condenser 230 volt Thousand Nine
A.C.50 Hz. 900 mm sweep complete having 3 Aluminium blades, Hundred Eighty
canopy erected complete. [ Make shall be approved by Engineer in Two And Paise
Charge] Sixty Three Only
In Words : Rupees One Lakh(s) Sixty Eight Thousand Five Hundred Forty Two And Paise Seventy Four Only
Note : The Credit of dismentalled materials of Rs. 11695.70 shall be recovered from the First R.A. bill payable to the contrator and there
after the dismentalled materials shall be the property of the contractor.
I/We am/are willing to carry out the work at ____________% above/below (in Figures)__________________________
percent Above / below (in words) the estimated rates mentioned above amount of my\our tender works out as under :-
Estimated amount put to Tender Rs._________________
Deduct _____% below Rs._________________
(-)Less For Dismantle Material Rs._________________
Net Amount Rs._________________
Estimated amount put to Tender Rs. _________________
(-)Less For Dismantle Material Rs. _______________
Net Amount Rs. _________________
A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding
material,labour and other factors pertaining to the work before submitting this tender.
B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender
documents of this work and agree to execute the same accordingly.
C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out on the instruction of Competant
Authority on Tender Submitted rate, No Excuse will be Accepted. Hence Contactors are Requested to quote the rate
considering this condition.
D Contractors are requested to quote the Tender by considering that payment will be made after availabilty of grant. Contractor
has to start the work immediately after issue of Work Order and as per instruction of Engineer in-Charge irrespective of
availability of grant.
E This Estimate has been prepared on the new SOR which is exclusive of GST hence GST additional will be paid to the agency
as per existing guidelines.
(Signature of the Contractor) Deputy Executive Engineer
Electrical R&B Sub Division
Note 1 Please strike out whichever is not applicable.
2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SCHEDULE A and B.pdf
List of Dismantle Material.pdf
Samras Girls Hostel SBD BHUJ.pdf
Download all tender documents and submit your bid