Maint. and Elect. Consumption Charges of Street Light on PWD Road under CND Division. (SH- SITC of Electro-Mechanical GPS Type Tower Clock and Other Misc Work in Ghantaghar Clock Tower).

SITC of Electro - Mech. Analog type GPS Clock Movement with stepper strong gearing motor bronze bearing with protection tube mechanism assembled in the aluminium die cast enclose the clock system will run the electricity and will directly change over the battery in the event of power failure our master clock Four set of wire connected to each slave mechanism which is fixed at the back of dial Master clock pulse signal are set periodically to the slave clock machine work independently and can only run in receiving signal from master clock auto plug & play tower clock of Minimum Size 5 feet x 5feet with GPS Time adjustment system. Our master control clock connected Ac main from the master clock. The Dial will be made up of acrylic dial (8mm) with MS pipe , designer hand are made up of aluminum with a strong substructure static & dynamic balanced. The Dial will illuminated during night through back light led , the light will automatically wake up 6:00 PM and shut off at 6:00 AM. Tower Clock cover with 96 hour online battery back up system will auto charging complete as required. 5 year warranty on Mechanism.

SITC of GPS NTP Network time server system with 3 nos loud speaker (80-100watt), 1 no 100 watt woofer and one no 250 watt amplifier for every hour alarm etc complete as reqd.

Supplying and drawing 3 core 2.5 sq.mm size of PVC insulated copper conductor multicore cable in the existing poles and bracket from cable termination connector to the fitting i/c providing suitable copper lugs connections etc. as reqd.

Supplying, Installation, Testing & Commissioning of 4Mtr. Decorative pole made out of gravity die casted base (H‐760mm) single Piece. Bottom part of the pole is 2000mm GI 165mm and top part 150mm PC 2000mm equipped with tri colour 75 Watt LED powered by Philips driver and 10KV surge. Pole has a fix base plate of 570mm. Pole has a top crown in golden colour casted in aluminium. The pole has a service window at the bottom containing 25Amp. connector terminal and 6A C Curve DP MCB of the desired rating. The pole is primer coated and painted with polyurethane paint. Unbreakable polycarbonate diffuser with titan finish complete with all connections and accessories like connector, wire, MCB etc and Dismantling of old damaged/ broken pole from foundation complete with disconnection and credit for the same etc. complete as required. (Note:- The newly installed poles should be identical in specifications, dimensions, material composition, design, and finish to the previously installed poles, ensuring uniformity in appearance, structural integrity, and functionality)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and laying one number PVC insulated and PVC sheathed / XLPE aluminium power cable of 1.1 kV grade of following size in existing DWC Pipe/ Duct / on wall surface etc as required

4 X 16 sq mm

4 x 25 sqmm

Please Enable Macros to View BoQ information