NIQ No.42/WBTDCL OF 2024-25(Technical)

Amount

Self Standing Pole Direction Signage: Design, supply, and manufacture of self-standing pole signage consisting of a 50 mm x 50 mm x 2.5 mm thick SHS base welded onto the bottom part and a 40 x 40 x 2 mm thick Ms SHS portion in the necessary form, fixed with 2 mm thick, using CNC machine cutting. After powder coating every component and adding the necessary hardware, Mateer & Arrow must CNC layout 3M or LG vinyl over the Ms plate. Dimensions: 48' x 16" x 23". Delivery to a tourist destination.

Wall Direction Signage: Design,Supply and fabrication of 3mm thick ACP over pest on 3m/LG make vinyl through Plotter cutting, fixing through VHB tape with necessary work. Size : 16" x 8". Delivery to a tourist destination.

Single side Directional pole : Supply, Febrication, and Design of This totem pole, which has the required work, is constructed from a 50 mm x 50 mm MS SHS piece with an exterior grade aluminum composite panel that is 3 mm thick.The pole's MS tube part is used to hold the MS plate.uses a plotter cutting machine to produce a retro reflective honeycomb vinyl pest on board. All exposed areas should have epoxy paint coated over epoxy primer. Dimensions: 3' x 2' x 8'. delivery at a tourist location without any civil construction.

Both side Directional pole : Supply, Febrication, and Design of This totem pole, which has the required work, is constructed from a 50 mm x 50 mm MS SHS piece with an exterior grade aluminum composite panel that is 3 mm thick.The pole's MS tube part is used to hold the MS plate.uses a plotter cutting machine to produce a retro reflective honeycomb vinyl pest on board. All exposed areas should have epoxy paint coated over epoxy primer. Dimensions: 3' x 2' x 8'. delivery at a tourist location without any civil construction.

M/S UDAYAN CONSTRUCTION (BID ID -5917526)

SIGNPOST INDIA LIMITED (BID ID -5917059)

J S CONCLAVE PVT.LTD. (BID ID -5904111)