Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC | ₹29.5 L Quoted ₹30.5 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹33.9 L+₹3.4 L (11.2%)Rejected-Finance | ₹33.9 L+₹3.4 L (11.2%) | L2 | Rejected-Finance BEING NOT LOWEST |
| 3 | L3₹34.0 L+₹3.5 L (11.6%)Rejected-Finance | ₹34.0 L+₹3.5 L (11.6%) | L3 | Rejected-Finance BEING NOT LOWEST |
| 4 | L4₹35.7 L+₹5.2 L (17.1%)Rejected-Finance 120 ODHAV VANDANA AIRPORT ROAD BHUJ KUTCH 370 001 | KACHCHH | GUJARAT | 370001 | ₹35.7 L+₹5.2 L (17.1%) | L4 | Rejected-Finance BEING NOT LOWEST |
| 5 | L5₹35.9 L+₹5.4 L (17.8%)Rejected-Finance | ₹35.9 L+₹5.4 L (17.8%) | L5 | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | SARASWATI CONSTRUCTION L1 | ASHAPURA CONTRACTOR L2 | BHAVANI PROVISION STORES L5 | SHREE BHANU ENTERPRISE L4 | Khodiyar Construction L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge. | 18.05 | QUINTAL | 400 ₹7,220 Lowest | 500 ₹9,025 | 500 ₹9,025 | 550 ₹9,927.5 | 500 ₹9,025 |
| 2.00 | Excavation in post holes (or similar holes) each n.exc. 0.5 cum, getting out in soft/loose soill returning, filling in and ramming earth or broken rubble mixed with earth around, in layers, n.exc. 25cm, watering complete all specified and as directed by Engineer-in-Charge | 20 | EACH | 120 ₹2,400 | 125 ₹2,500 | 100 ₹2,000 Lowest | 250 ₹5,000 | 300 ₹6,000 |
| 3.00 | Material & labour for cement concrete 1:3:6 type C2 (using 40 mm graded curshed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge | 4.32 | CUBIC METRE | 4,500 ₹19,440 Lowest | 5,500 ₹23,760 | 4,500 ₹19,440 Lowest | 5,500 ₹23,760 | 5,000 ₹21,600 |
| 4.00 | Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all specified and directed. | 4.32 | CUBIC METRE | 280 ₹1,209.6 | 700 ₹3,024 | 100 ₹432 Lowest | 300 ₹1,296 | 300 ₹1,296 |
| 5.00 | Supply & fix mild steel work in tubular trusses/structures of square/round/ rectangular pipes, rafters, purlins including special shaped washer etc. complete using ERW or inductuin butt welded tubes confirming to IS-1161-1998 grade St-240 including notching, drilling, fitting, rivetting and or welding or connecting bolts and nuts, cleats, gusset plates etc complete all as specified and directed by Engineer-in-Charge | 1,200 | KILOGRAM | 116 ₹1,39,200 | 115 ₹1,38,000 Lowest | 140 ₹1,68,000 | 120 ₹1,44,000 | 140 ₹1,68,000 |
| 6.00 | Supply & fix mild steel for wind ties of size 25mm x 5mm for roof including securing bolts ,incuding cutting tops to shape as directed , drilling holes and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge. | 80 | KILOGRAM | 112 ₹8,960 | 120 ₹9,600 | 120 ₹9,600 | 110 ₹8,800 Lowest | 125 ₹10,000 |
| 7.00 | Supply & fix MS framed work by fabrication such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work of water tanks etcincluding portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge. | 500 | KILOGRAM | 116 ₹58,000 Lowest | 120 ₹60,000 | 140 ₹70,000 | 200 ₹1,00,000 | 140 ₹70,000 |
| 8.00 | Supply & fix MS purpose made butt hinges conforming to Fe-290 Gde-E-165 suitable for fixing to stone/ concrete door and window frames including fabrication work etc complete all as specified and directed by Engineer-in-Charge. | 25 | KILOGRAM | 199 ₹4,975 | 130 ₹3,250 | 140 ₹3,500 | 200 ₹5,000 | 125 ₹3,125 Lowest |
| 9.00 | Material and labour for preparing new or previously untreated steel and iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint 1st quality over one coat of rid oxide primer or zinc chrome on steel and iron surfaces complete all as specified and directed by Engineer-in-Charge. | 70 | SQUARE METRE | 50 ₹3,500 Lowest | 100 ₹7,000 | 80 ₹5,600 | 140 ₹9,800 | 80 ₹5,600 |
| 10.00 | Material and labour for preparing new or previously untreated steel and iron surfaces of any description not otherwise described n. exc. 10cm width or girth and applying two coats of synthetic enamel paint 1st quality over one coat of rid oxide primer or zinc chrome on steel and iron surfaces complete all as specified and directed by Engineer-in-Charge. | 9 | TEN RUNNING METRE | 800 ₹7,200 | 800 ₹7,200 | 100 ₹900 | 140 ₹1,260 | 80 ₹720 Lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
19 Jul 2025, 6:00 pmClosed
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
REPAIRS TO ROOFING FALSE CEILING, BIRD PROOF NETTING AND MISC WKS TO CERTAIN BUILDING IN TECH AREA UNDER GE (AF) BHUJ AT AF STN BHUJ
2025_MES_710105_2
8820/V/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
GE (AF) BHUJ
₹70,000
Yes
26 Aug 2025
2 Jul 2025
21 Jul 2025
2 Jul 2025
19 Jul 2025
7 Jul 2025
3 Jul 2025 - 3 Jul 2025
Amount
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.
Excavation in post holes (or similar holes) each n.exc. 0.5 cum, getting out in soft/loose soill returning, filling in and ramming earth or broken rubble mixed with earth around, in layers, n.exc. 25cm, watering complete all specified and as directed by Engineer-in-Charge
Material & labour for cement concrete 1:3:6 type C2 (using 40 mm graded curshed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge
Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all specified and directed.
Supply & fix mild steel work in tubular trusses/structures of square/round/ rectangular pipes, rafters, purlins including special shaped washer etc. complete using ERW or inductuin butt welded tubes confirming to IS-1161-1998 grade St-240 including notching, drilling, fitting, rivetting and or welding or connecting bolts and nuts, cleats, gusset plates etc complete all as specified and directed by Engineer-in-Charge
Supply & fix mild steel for wind ties of size 25mm x 5mm for roof including securing bolts ,incuding cutting tops to shape as directed , drilling holes and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.
Supply & fix MS framed work by fabrication such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work of water tanks etcincluding portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
Supply & fix MS purpose made butt hinges conforming to Fe-290 Gde-E-165 suitable for fixing to stone/ concrete door and window frames including fabrication work etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparing new or previously untreated steel and iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint 1st quality over one coat of rid oxide primer or zinc chrome on steel and iron surfaces complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparing new or previously untreated steel and iron surfaces of any description not otherwise described n. exc. 10cm width or girth and applying two coats of synthetic enamel paint 1st quality over one coat of rid oxide primer or zinc chrome on steel and iron surfaces complete all as specified and directed by Engineer-in-Charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge.
Supply & fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Supply & fix coloured galvalume ridges,corner piece,barge board,window flashing etc, 0.50 mm thick, fixed with L or J type,special screw or cranked hook bolts in roofs , walls etc complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete any description any thickness and any position complete all as specified and directed by Engineer-in-Charge.
Material & labour for 75mm thick cement concrete type C2 1:3:6 using 40mm graded aggregate as in plinth protection finished even and smooth without using extra cement, laid in bays, joints filled with sand and bitumen mixture at 3:1 ration complete all as specified and directed by Engineer-in-Charge.
Material & labour for 75 mm thick cement concrete type C-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed by Engineer-in-Charge.
Material & labour for 100 mm thick for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in path/ hard standing finishing smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Material & labour for 100 mm thick for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in path/ hard standing complete all as specified and directed by Engineer-in-Charge.
Material & labour for forming contraction (Dummy) joints 65mm X 10mm wide, filled with sealing compound Gde 'B' for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
Taking down existing water proofing tretment on RCC slab / beams with bitumen felt without damaging structure and removing the debris outside the MD land and M&L for plaster 15 mm thick on concrete surfaces in cement mortar 1:4 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to receive WPT treatment , applying a coat of bitumen primer confirming to IS - 3384-1986 @ 0.30 ltr / Sqm ,providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application with side overlap 100 mm and ends over laps 150 mm over primed surfaces complete all as specified and as directed by Engineer-in-Charge.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. .
Supply & fix cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors with grey cement and no pigment, and cut and polished over 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge. .
Material & labour for providing cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in roof kerbs, mud stops, filling in frames and the like rounded or or chamfered on edges complete all as specified and directed by Engineer-in-Charge. .
Material & labour for 60 mm thick (M-25 grade) glossy rubber mould interlocking tiles with grey cement and pigment conforming to IS-15658-2006 laid dry over 30 mm compacted sand bed, size & pattern of tiles complete all as specified and directed by Engineer-in-Charge. Note:- Sand to be measured & paid separately
Material & labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.
Dismantling wall and ceiling boards, any thickness including cover fillets, grid work of any description complete all as specified and directed by Engineer-in-Charge. .
Material & labour for providing 12mm thick Gyp boards in ceilings fixed to ceiling sections with screws @ 300mm centre to centre and making good joints Gypsum binder including preparing the surfaces of ceiling boards and applying 2 coats of acrylic oil emulsion distemper 1st quality with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofits at approxly 900mm centre to centre with GI cleats, GI suspenders and steel expansion fasteners with and including ceiling section of 0.55mm thick having kurled web of 50 mm and flange of 26 mm each side with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed by Engineer-in-Charge..
Material & labour for false ceiling corners with designed angular shape of size 100x100mm with POP fixed on 6mm thick fibre board with 20x20mm, 0.55mm thick galvanised sections fixed at intervals not more than 750mm complete all as specified and directed by Engr-in-Charge.
Supply & fix exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed by Engineer-in-Charge.
Supply & fix anodised aluminium snap grid frame work for false ceiling, size of grid 605X605 mm complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge..
Supply & fix 4.00 mm thick sheet figured glass pin headed type and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed by Engineer-in-charge. .
Material & labour for rendering 15mm thick in Cement Mortar 1:4 (external) on brick walls, PCC block masonry or on Concrete Surfaces in two coats, 1st coat of 10mm thick and 2nd coat of 5mm thick including mixing with WPC to 2nd coat with water proofing compound @3% by wt of cement as per Manufacturer's instructions, plastered surfaces finished even and Smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. NOTE : Integral water proofing compound shall be Measured and Paid separately. (ii) Height of building may vary from 3 m to 6 m. .
Supply only inetergal water proofing compound complete all as specified and directed by Engineer-in-Charge. .
Material & labour for 10 mm thick rendering for fair faces of concrete, brick work surfaces on walls in CM 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. .
Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and directed by Engineer-in-Charge
Material & labour for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion 1st quality, white or tinted including one coat of birla white putty by finishing the surfaces even and smooth complete all as specified and directed by Engr-in-Charge
Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
Material & labour for preparation of new or previously untreated concrete or PCC block masonry external surfaces and applying two coats of exterior emulsion paint 1st quality (in camouflage pattern as approved by the GE) over a coat of primer complete all as specified and directed by Engr-in-Charge. .
Supply & fix in repairs bird proofing netting in hangers, storage accn etc complete all as specified bird proofing net of Co-Polymer Nylon monofilament, ultraviolet stabilized with aperture of 25mm x 25mm Machine Knotting with the dia of filament wire as 0.80mm, melting point 260 deg, tensile force to resist 23.08 Kgs as approved by GE complete all as specified and directed by Engineer-in-charge. Note:- Height of Bldgs approx 12mtr considered .
Repairing/ taking down aluminium window/doors of any description area exc 1.00Sqm n. exc 2.00 Sqm repairing/ retightening screws, aluminium clips and securing top & bottom rails using MS 10mm bar having both sides threading incl bolting, fixing of new rubber padding, aluminium snap bidding, glazing clips and re-fixing resuring in same opening complete all as specified and directed by Engineer-in-Charge. .
Repairing/ taking down aluminium window/doors of any description area n. exc 1.00 Sqm repairing/ retightening screws, aluminium clips and securing top & bottom rails using MS 10mm bar having both sides threading incl bolting, fixing of new rubber padding, aluminium snap bidding, glazing clips and re-fixing resuring in same opening complete all as specified and directed by Engineer-in-Charge. .
Taking down chowkaht or frame (without taking off shutter from frame) exc. 1.50 Sqm but n.exc. 4.00 Sqm complete all as specified and directed by Engineer-in-Charge.
Taking down Chowkaht or frame (without taking off shutter from frame) n.exc. 1.50 Sqm complete all as specified and directed by Engineer-in-Charge.
Supply & fix anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-charge. .
Supply & fix anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-charge.
Supply & fix galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge
Supply & fix aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and directed by Engr-in-Charge.
Supply & fix in repairs steel rolling shutters 1 mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle complete all as specified and directed by Engr-in-Charge.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position Ecx 250 & n exc 500 Ltr. (Cleaning repairing, etc. Measured separately) complete all as specified and directed by Engr-in-Charge.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position Ecx 500 & n exc 1000 Ltr. (Cleaning repairing, etc. Measured separately) complete all as specified and directed by Engr-in-Charge.
Supply & fix rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 750 ltrs complete all as specified and directed by Engineer-in-Charge. .
Supply & fix rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs complete all as specified and directed by Engineer-in-Charge. .
Taking up or down following size of steel tubing and connections including removal to store for reuse or credit to contractor complete all as specified and directed by Engr-in-Charge. Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing, where required.
15 mm bore .
20 mm bore .
Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge. of following sizes: (SDR-13.5)
25 mm bore .
32 mm bore .
Supply & fix in repairs ball valves 25mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe & fixed (Minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge.. .
Supply & fix for 32mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge
ASHAPURA CONTRACTOR (BID ID -3355102)
Khodiyar Construction (BID ID -3364781)
SHREE BHANU ENTERPRISE (BID ID -3364869)
BHAVANI PROVISION STORES (BID ID -3361593)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .