SPECIAL REPAIRS TO PERIMETER ROAD FROM POST NO 02 TO POST NO 03 OF FASF AT MIL STN BHUJ

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, makinggood by filling in screened & graded road metal, watering and well ramming (including supply of road metal complete all as directed.

M&L Premix bituminous,macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 4% binder contant using paving bitumen(VG-30) any penitration including prepration of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat of bituminous primer at 5 Kg per 10 Sqm complete all as directed.

M&L Premix bituminous,macadam laid/rolled and compacted to required gradient and camber (consolidated thickness more than 75 mm) with 4% binder contant using paving bitumen (VG-30) any penitration including prepration of black top surfaces bu brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat of bituminous primer at 5 Kg per 10 Sqm complete all as directed.

M&L Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc applying evenly a priming /tack coat with paving bituminous primer (VG -10)grade at 5 kg per 10 Sqm.

Material and labour for bituminous premix semi dense asphaltic concrete , 30 mm consolidated/compacted thickness using Hot Mix plant and machenical paver with 5.5% (paving bitumen grade)(VG-30) binder content by weight of total mix, rolled and compacted using 8 to 10 tone power road roller to require camber and gradient compl,ete all as specified and as directed by Engr-in-charge.

M&L demolation of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any morter complete all as directed.

M&L Boulder pitching, laid dry, hand packed tightly and grouted with cement and sand mortar 1:6 complete all as directed.

M&L Boulder pitching, Except boulders laid dry, hand packed tightly and grouted with cement and sand mortar 1:6 complete all as directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above GL)

M&L for 75mm thick PCC type D2 1:4:8 using (40mm gradded aggregate) as in sub base.

M&L for 100mm thick PCC type B2 1:2:4 using (40mm gradded aggregate) as in Hard standing finishing cement concrete even and smooth without using extra cement.

M&L for preparing bituminous surfaces of road and making 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n.exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Pelectricals