15th Finance Commission Untide

Name of Work :Bid Documents For ( 1) Constriction of paver block work in S.C.S.P area (2) word no-6

vatsal park sarvjanik plot development work (3) word no-7 kalapurn nagar and nirmal park sarvjanik

plot development work Under 15th Finance Untide – Mundra‑Baroi Municipality, District Kachchh

Item No Item Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making

1 a base for road work including removing the excavated stuff and 61.88 109.24 Cum

depositing on the road side slope as directed upto 50Mt.lead.

2 Extra Lead Upto 1 km….Statment-5, 61.88 145.19 Cum

Providing and laying cement concrete 1:3:6 (1 Cement : 4 coarse

sand :8 Crushed broken stone aggregates 40 mm nomial size) and

curing complete excluding cost of form work in (A) Foundation and

providing and fixing pre-cast rubber Day / steel day inter locking

concrete block 60mm thick with grad of concrete M300 pnumetic

compressed/ viberated mechenically and as per approved design

conforming to IS 15658 : 2006 including35mm sand layer for

leveling and filling the joint with sand in proper line level as per

guidlinesof IRC : SP 63-2018 etc. complete.

providing cement vata (10cm. X 10cm. Size) quarter round in

5 cement mortar 1:1 including neat cement finishing, watering etc. 100 24.28 rmt

providing and fixing towell celing and flooring 10.0 kg. F/Cm2

working pressure poluthene pipes of the following outside Dia. Low

6 density , complete withspecial flange compression tye fittings, wall 21 339.05 rmt

clipset. Including making vgood the wall celling and flooring.

providing laying (to level or slop) and jointing reinforced concrete

light duty non-pressure pipe I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints

including testing of joints complete. (B) 150mm

Uplift & Renovation manhole chamber Brick work using common

brunt clay build ing brick having crushing strength not less than

kg/Sq.cm in Foundation and plinth in cement mortar 1:5 (1-cement :

5- fine sand) (B) Conventional (up to 10 ton)

RCC precast M.H. frame &cover manufacture, supply &delivery at

store or at site of work precast RCC M.200 fram & cover suitable to

9 drainage M.H. and as per type design & drawing including cost of

reinforcement M.s. angles or flate, curring mold work etc.

frame 3 1121 No.

cover 3 1173 No.

Schedule B1 Total

Filling in foundation and plinth with murrum or selected soil in

1 layers of 20cm. thickness including watering, ramming and 247.50 269.75 Cu.m

consolidating etc. complete.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

sand : 6- hand broken stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in

4 cement mortar 1:1 including neat cement finishing, watering etc. 220.00 24.28 Rmt

Mundra Baroi Nagarpalika

Item No Item Quantity Rate Per Amount

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

5 M250 grade concret as per approved design and including 60.00 400.87 Rmt

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete.

Precast concrete block masonry (including quoin blocks jamb blocks

closer etc.) with solid concrete blocks of approved size made of

6 cement concrete 1:3:6 mix (1-Cement : 3 coarse sand: 6- graded 12.97 3771.97 cum

stone aggregates of 20 mm and down grade) in foundation and plinth

cement morter 1:6

Item No.8 Providing 20mm thick cement plaster in single coat on

single or half brick walls for interior plastering upto floor two level

and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement. 6-1-4. (D) 6 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 59 kg

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 60 x 60 x 120 cm.

10 Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm 1 1078.68 Ea.

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner. 6-3-5.

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with

11 cutting, welding, grinding & finishing duly painted with one coat of 20 57.57 Kg.

red oxide with erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering & finishing

complete.3-16-4-A

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)2-16-2 (B) Flood Light (IP-65), Surge

protection -4kV integral and ,Light must have 440VAC line supply

with over-voltage protection. (iv) 90 - 119 watts Cat-lll

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kV grade ISI marked copper wires of following size to be

erected as directed.'1-4-5 (h) 2.50 Sq.mm 3 core round PVC

Mundra Baroi Nagarpalika

Item No Item Quantity Rate Per Amount

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 kV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables. 4-3-2. (C) 3 core 6 Sq. mm

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

15 connecting accessories of same material at required depth in 40 53.53 Mtr.

existing trench for laying of cable. below ground / road surface for

enclosing cable 4-5-8. (A)50 mm outer dia

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity 3-10-3. (A) 6 to

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. 3-14-9 (a) For Electrical Installation up to

440V in normal soil Length of pipe - 1 Mtr Back filling compound -

1 Nos Bag of 15 Kg.

Schedule B2 Total

Filling in foundation and plinth with murrum or selected soil in

1 layers of 20cm. thickness including watering, ramming and 570.5 269.7508 Cu.m

consolidating etc. complete.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

sand : 6- hand broken stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in

4 cement mortar 1:1 including neat cement finishing, watering etc. 334 24.2804 Rmt

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

5 M250 grade concret as per approved design and including 60 400.869 Rmt

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete.

Mundra Baroi Nagarpalika

Item No Item Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement. 6-1-4. (D) 6 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 59 kg

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 60 x 60 x 120 cm.

7 Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm 2 1078.68 Ea

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner. 6-3-5.

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with

8 cutting, welding, grinding & finishing duly painted with one coat of 40 57.57 kg.

red oxide with erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering & finishing

complete.3-16-4-A

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)2-16-2 (B) Flood Light (IP-65), Surge

protection -4kV integral and ,Light must have 440VAC line supply

with over-voltage protection. (iv) 90 - 119 watts Cat-lll

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kV grade ISI marked copper wires of following size to be

erected as directed.'1-4-5 (h) 2.50 Sq.mm 3 core round PVC

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 kV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables. 4-3-2. (C) 3 core 6 Sq. mm

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

12 connecting accessories of same material at required depth in 120 53.53 MTR

existing trench for laying of cable. below ground / road surface for

enclosing cable 4-5-8. (A)50 mm outer dia

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity 3-10-3. (A) 6 to

Mundra Baroi Nagarpalika

Item No Item Quantity Rate Per Amount

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. 3-14-9 (a) For Electrical Installation up to

440V in normal soil Length of pipe - 1 Mtr Back filling compound -

1 Nos Bag of 15 Kg.

Schedule B3 Total

Schedule B1+Schedule B2+Schedule B3 Total

Say Total(excluding GST)

I/We am/are willing to carry out the work at ______________% above/below percent (should be written in figures and words) of

Tendered amount put to tender Rs.30,10,252.26 Tendered amount put to tender Rs

1.All work shall be carried out as per public works department handbook and other specifications of division or as directed.

2.Rates quoted inclusive of clearance of sight (prior to commencement of work and at its close) in all respect

and hold good for work under all conditions , sight, moisture, weather etc

3.one percent labor cess will be deducted from the valued work done as per ' Bulding and other construction

4.work welfare cess act' G.R. No. GHR - 2005/04/CWA/2004/841/M-3 Dt. 31/01/2005

President, Chief Officer,

Signature of Contractor. Mundra-Baroi Municipality Mundra-Baroi Municipality

Mundra Baroi Nagarpalika