Supply of 2 No. Auto Tipper with Bin Lifter 1.8 Cum Capacity at Municipal Board Itawa

Amount

Supply of 02 Nos. Auto tipper with bin lifter

Fabricated on four wheel chassis with factory installed cabin. The Tipper should be capable to collect the garbage from the door to door having capacity minimum 1.80 cum. The Tipper should be hinged on two nos. of arm to capable the hi-rised tipping and suitable to unload the garbage directly in to the compactor. Equipment should have bin lifter arrangement for hydraulically lifting of 1.1 cum container and directly loading in its hoper. It should have facility to cover from the top and locking arrangement at the time of tipping. The Hopper having following specifications. • Gross vehicle weight (GVW): Minimum 2100 Kg. • Pay load: Min. 1000 Kg. • Engine: Fuel efficient, diesel engine minimum 55 HP. • Wheel base: Minimum 2300 mm Hydraulically operated tipping arrangement a). Main Frame should be box type, made of pressed steel sections ISMC 75x40 mm mounted on vehicle chassis through rolled steel channel sub-frame. b). Body should be made of should 2mm thick MS sheet. c). Tipping Ram: Two nos. of single acting type tipping cylinder having capacity of 2.0 tone. The ram to have removable glands easy dismantling and hard chrome plated rods. d). Boom Arm: Two heavy duty boom, having centers match the hopper body size, for maximum workability of boom arm. These booms should be of box type construction made of 4 mm thick MS sheet. The arm should be connected at the top through cross structure/ metal plate. e) Bin Lifter: The lifter should be reliable system with proven technology. Optimum system should be there for the collection of various types of refuse within one collection point and its low rave rail should permit the hand loading of bulk refuse items as well as the easy emptying of wheel bins. Tipping of 1.1 m³ container directly in the hopper. This should be done without any damages to the container. The lifter should be able to unload Garbage from bin of size 1100 Litres. Should be light weight for high legal payloads. A safety valve shall be provided in the system to avoid sudden descent of bin lifter in a case of failure in hydraulic system. Stabilizers: Two no. number of independent Controlled stabilizers shall be provided to keep the vehicle leveled even on the un-even terrain and to balance the vehicle during /unloading of garbage into the compactor Control Valve: Three Spool type Direction valve is to be provided for all operation with levers easily for easy & comfortable operation. Spools should be self cantering type. A pressure relief valve is to be provided to safeguard the hydraulic circuit and to prevent excess loading. Provision for safety when loading and unloading of the garbage collection container. Hydraulic Pump: Hydraulic pump should be coupled with the vehicle PTO /vehicle engines capable to lift the 2.0 ton Garbage. Painting: All members of the hydraulically operated mechanism shall be first cleaned either by appropriate method, or given a two coat of primer, and finally two or more coats of synthetic enamel paint of approved colour and make, as per Purchaser. Accessories: Provision should be made for Bell. GAD shall be submitted by the bidder should got approved before manufacturing.