Facelifting of Mini-Secretariat Complex Duderhama Ganderbal

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50meters lead.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Dismantling of existing wooden panelling, skirting and framing from walls, partitions or ceiling- including removal of nails, screws, adhesives, beading and fixtures, stacking of serciceable materials as directed and disposal of unserviceable materials within a lead of 50 meters complete as per direction of the EIC.

Brick work with (Maharaji Bricks) in lime mortar in cement sand mortar 1:4 of brick size 9"*1.5"*3.5" including cost of 15mm thick budloo wood beading iron brackets/strips of size 8mm thickness and pointing with lime surkhi : sand mortar of mix 1:1 in superstructure above plinth level upto floor V-Level including curing and scaffolding charges inluding all carriages/head load upto site of work complete, as per directions of EIC.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Imported wood KD

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second kail wood

Refixing of glazed windows got from dismentalling & repairing as required incl. all necessary all fixtures completeas per the directions of EIC.

Refixing of Window Wire Gauze Shutters got from dismentalling & repairing as required incl. all necessary all fixtures completeas per the directions of EIC.

Refixing of Doors got from dismentalling & repairing as required incl. all necessary all fixtures completeas per the directions of EIC.

Supply/fixing of timber for replacement of damaged portion incl. all carriages, Head Load etc complete all as per directions of EIC.

P/F of Almunium Hardware fittings all complete Hinges

T. Bolts 100mm

Handles 150mm

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

Providing/Fixing of 0.50mm thick Colour coated (Hi-Rib) profile sheets for roofing including vertical/curved surface fixed with Polymer coated J or l hooks, bolts and nuts 8mm diameter with bitumen and G.I Limpet washers or with G.I Limpet washers (0.50mm thick with zinc coating not less than 275g/sqm) including ridges,hips,valleys and carraiges of materials involved upto site of work complete.

providing and fixing 10mm thick wooden knotted imported panelling fixed in soffits including underneath frame work of wooden jambs of size 50*25mm including wooden cornice of required size, the job shall also include scaffolding finishing with coat of touchwood polishing etc all up to the satification of EIC.

Providing and fixing plained eaves boarding. 2nd class kail wood 300x40 mm (nominal size)

Provision for Traditional/ Ornamental Exterior features like wooden columns, bracings etc in second class deodar complete in all respects -as per directions of EIC

Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) including all carriages

Providing and applying one coat of dust-resistant acrylic wall putty of approved make and manufacture specially for mulated for easy sanding and minimal dust generation on drying on new or prepared masonry/plaster substrates (walls/ceiling) including filling cracks up to 2mm surface leveling curing and sanding ready for subsequent finish coat complete.

French spirit polishing, Two or more coats on new works including a coat of wood filler

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.incl priming coat.