Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹9.4 LAccepted-AOC GEETA COTTAGE NO 03 HOUSE NO 11 OPP CIVIL AIR PORT BHUJ KUTCH 370001 GUJARAT | KACHCHH | GUJARAT | 370001 | l1 | Accepted-AOC LOWEST | |
| 2 | L2₹10.3 L+₹78,392 (8.27%)Rejected-Finance HAVELI FALIYA NALIYA KUTCH 370 655 | KACHCHH | GUJARAT | 370655 | L2 | Rejected-Finance NOT LOWEST |
Tender Value
₹9.9 L
EMD Value
₹19,900
Closing Date
13 Jun 2020, 6:00 pmClosed
Asst Garrison Engineer (I) (CG) Jakhau
Asst Garrison Engineer (I) (CG) Jakhau Military Engineer Services Naliya-Kutch-370655
REPAIR MAINT OF PUMP MOTORS RO GEN SET AND STP WITH MISC ALLIED WORKS AT ICGS JAKHAU AND CGRA NALIYA UNDER AGE I CG JAKHAU
2020_MES_341248_2
8034
Open Tender
Civil Works
Item Rate
270 days
JAKHAU AND NALIYA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE (I) (CG) Jakhau
₹19,900
Yes
19 Jun 2020
29 May 2020
15 Jun 2020
29 May 2020
13 Jun 2020
30 May 2020
Amount
Dismantling cleaning and servicing of domestic RO 15/20 LPH as per manufactured instructions and rectifying defects such as RO tubing ,elbow if any found during servicing and check outlet water parameters and replace u/s spare parts or filter accordingly to caryout desire water quality as per IS and making record register complete all as specified and directed. Note:- Supply only spare parts found unserviceable/defective will be measured and paid separately under relevant item of Sch 'A'. (a) The rate for refixing/ replacing unserviceable items are deemed to be included in unit rate of above item. (b) The Contractor has to quote credit for all retrived (c) Each domestic RO servicing shall be on monthly basis and rate are deemed to be included in unit rate of above item.But this item pay one time of entire period of contract for each RO.only accessories will be pay in concerned item.
Supply only active carbon filter for domestic RO plant 15 /20 LPH capacity complete all as specified and directed
Supply only spun cartage filter 5 micron for domestic RO plant 15/20 LPH capacity complete all as specified and directed
Supply only RO membrane 80 GPD for domestic RO plant 15/20 Ltr/hour capacity complete all as specified and directed
Supply only booster pump 100 GPD for domestic RO plant 15/20 Ltr/hour capacity complete all as specified and directed
Supply only 36 watt ,1.5 amp A/C TO D/C Adapter for booster pump of domestic RO plant 15/20 Ltr/hour capacity complete all as specified and directed
Supply only 36 watt solnvoied valve of domestic RO plant 15/20 Ltr/hour capacity complete all as specified and directed
Supply only membrane housing of domestic RO plant 15/20 Ltr/hour capacity complete all as specified and directed
M&L for servicing of 500 LPH RO plant Make:-Thermax (installed at ICGS Jakhau Station) as per manufacture company instruction and carried out desire results of output water as per IS 10500 : 2012 including dismantling of filter cartage and membrane and removing of blockage in pipes and making leak proof connections after rectifications of any type of defects in filtration and refixing the same system complete all as specified and directed.Note:- Supply only spare parts found unserviceable/defective will be measured and paid separately under relevant item of Sch 'A'.(a) The rate for refixing/ replacing unserviceable items are deemed to be included in unit rate of above item.(b) The Contractor has to quote credit for all retrieved. (c) RO servicing shall be on monthly basis and rate are deemed to be included in unit rate of above item. But this item pay one time of entire period of contract for each RO. only accessories will be pay in concerned item
Supply only membrane 4040 for RO 500 LPH capacity complete all as specified and directed Make:-Torroy
Supply only film spun cartage filter for RO 500 LPH capacity Make:- Thermax complete all as specified and directed
Supply only anti calent chemical for RO 500 LPH capacity complete all as specified and directed
M&L for dismantling and replacement of U/S 0.5 HP raw water feed pump motor 2000 LPH and refix its original position complete all as specified and directed.
S & F in replacement of (including all the necessary connection electrical as well as hydraulic i.e. starter, MCCBs, connecting cables/wires, Connecting Pipe Lines/ fittings and all accessories which are not mentioned but required for smooth operation of High Pressure Pump) High Pressure Multistage Centrifugal Pump of Capacity 2KW, 3 Phase, 415V, 50 Hz, RPM 2945, with IP 55 Protection, Max operating Pressure 2.5 Mpa with 125 M head of Make: Wilo Model Helix First V 2211-5/25/E/S/40 or equivalent in Crompton or equivalent including removing the old motor of any capacity complete all as specified and directed
Supply and Fix in trenches/passing under roads galvanised steel water tubing, medium grade, including necessary fittings such as GI bends, Tees, Union etc complete and connecting to water supply pipe line and connections including removing / taking down the old pipe line complete all as specified and as directed.
all as above item No 15 but 50 mm bore
all as above item No 15 but 40 mm bore
all as above item No 15 but 25 mm bore
Supply and Fix in trenches/passing under roads Unplasticised PVC pipes of pressure rating 10 Kgf/sq cm water tubing, including necessary fittings such as bends,Tees, Union etc complete and connecting to water supply pipe line and connections including removing / taking down the old pipe line complete all as specified and as directed
all as above item No 19 but 50 mm bore
all as above item No 19 but 40 mm bore
all as above item No 19 but 25 mm bore
all as above item No 19 but 20 mm bore
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc and getting out including trimming sides and forming levelled bottom surface all as specified and directed at site.
Returning, filling-in, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
S&F in repair Upvc ball valve for UPVC pipe and fixed after taking out old unserviceable one of the following sizes.:-
all as above item No 27 but 50 mm bore
all as above item No 27 but 25 mm bore
Supply & fix in repairs sluice valve 100 mm dia bore cast iron body class - PN 1.6 ISI Marked both ends flanged with brass spindle and brass check nuts with CI hand wheel including jointing material like rubber in section sheets 3mm thick, bolts, nuts and fixed to pipe line, including testing complete all as specified and directed.
M &L for De-watering the existing 50000 Gallons capacity UG Sump and cleaning the internal surfaces of sump to remove scales, mud and other foreign material applying surfaces with mixture of bleaching powder and water, finally washing with fresh water and treating with one coat of white wash to internal wall and bottom surfaces etc, writing black capital letter "cleaned on (date) & due date", letters height not less than 5 Cm complete & all as directed
all as above item No 31 but 25000 Gallons Static Water Tank
all as above item No 31 but 20000 Gallons UG Sump
all as above item No 31 but 5000 Gallons UG Sump
all as above item No 31 but 2000 Gallons UG Sump
M&L for Cleaning of PVC water tank of capacity 5000/10000 litrs using bleaching powder, scrubbing of inner surface of tanks by means of wire brush for removing all scale formed and other foreign particles and washing completely all as directed including cleaning of inlet & outlet pipe easing of ball valves and refixing of lid etc, writing the cleaning date on tank with synthetic enamel paint etc complete all as directed
M&L for Repair/Servicing the monoblock pump set, single phase, 2 HP by in and including replacing new bearings, greasing, MS steel/bolt of pump in all respect for smooth functioning etc all as directed.
M&L for Dismantling and taking out submersible pump set for any capacity from UG Sump for repair or for finding of any type of fault, such as cable fault / leakage of pipe etc. and refixing in original position after repairing and lowering in the UG Sump, with replacement of damaged gasket and nut bolts etc including testing of submersible pump set etc complete all as directed.
M&L for Opening of 7.5 HP submersible motor and pump and reassembling the complete pump after replacement of following spares including transportation to work shop and back reinstalling, testing etc.
M&L for Opening of 5 HP submersible motor and pump and reassembling the complete pump after replacement of following spares including transportation to work shop and back reinstalling, testing etc.
M&L for Taking out existing burnt out winding wire of 7.5 HP pump set and rewinding with super enameled copper conductor insulating winding wire, guage and the turns of wire is as per the manufacture's specification of existing pump
M&L for Taking out existing burnt out winding wire of 5 HP pump set and rewinding with super enameled copper conductor insulating winding wire, guage and the turns of wire is as per the manufacture's specification of existing pump
Supply in replacement of bearings of motor
Supply in replacement of bush of motor
Supply in replacement of bush of pumps
Supply in replacement of stage impeller of pump
Supply in replacement of stainless shaft
M&L for Rectification of leakage in DI/UPVC/GI water mains 50 mm to 100 mm bore including excavation in any type of soil (approx 2 meter length,1.5 meter width, 1.5 meter depth) dewatering complete by using pump set of 5 to 7 HP for rectification of leakage , by replacing of any type of joint such as run lead joint / CT joint / quick fix clamp of any size including cutting, welding, drilling etc. (Note: cost of CT joint / lead joint/clamps is deemed to be included in the rates quoted by the tenderer.)
All as above item No 48 but size 20 mm to 40 mm
M&L for Servicing of DG Set 10 KVA Make:- Greaves cotton Model:- GPWII-10 at ICGS Jakhau by carry out 'B' check including drain out the lubricating oil, replacement of the by replacement of following spares and testing complete all as specified and directed:- Note:- Parts to be replaced will be measured and paid as supply only separately as mentioned below:-
all as above item No 50 but Supply only of Lub oil filter.
all as above item No 50 but Supply only of Fuel filter
all as above item No 50 but Supply only of Lubricant oil 15W/40 premium blue
M&L for Servicing of DG Set 30 KVA trolley mounted Make:-Kirloskar Engine No.:- APL-02051605 at ICGS Jakhau by carry out 'B' check including drain out the lubricating oil, cleaning of air cleander etc and replacement of the of following spares and testing complete all as specified and directed:- Note:- Parts to be replaced will be measured and paid as supply only separately as mentioned below:-
all as above item No 54 but Supply only of Lub oil filter.
all as above item No 54 but Supply only of Fuel filter
all as above item No 54 but Supply only of Lubricant oil 15W/40 premium blue
M&L for Servicing of DG Set 62.5 KVA trolley mounted Make:-CG Engine No.:- 1308041507936 at CGRA Naliya by carry out 'B' check including drain out the lubricating oil, and replacement of the of following spares and testing complete all as specified and directed:- Note:- Parts to be replaced will be measured and paid as supply only separately as mentioned below:-
all as above item No 58 but Supply only of Lub oil filter.
all as above item No 58 but Supply only of Fuel filter
all as above item No 58 but Supply only of Lubricant oil 15W/40 premium blue
all as above item No 58 but Supply only air filter paper element type
M&L for Servicing of DG Set 82.5 KVA Make:-Kirloskar, Engine No.:- 411-3545/1120116 at CGRA Naliya by carry out 'B' check including drain out the lubricating oil, and replacement of the of following spares and testing complete all as specified and directed:- Note:- Parts to be replaced will be measured and paid as supply only separately as mentioned below:-
all as above item No 63 but Supply only of Lub oil filter.
all as above item No 63 but Supply only of Fuel filter
all as above item No 63 but Supply only of Lubricant oil 15W/40 premium blue
all as above item No 63 but Supply only air filter paper element type
all as above item No 63 but Supply only coolant fluid for radiator
M&L for Servicing of DG Set 125/100 KVA Make:-Greaves cotton , Engine No.:- 1308041606393 at ICGS Jakhau by carry out 'B' check including drain out the lubricating oil, and replacement of the of following spares and testing complete all as specified and directed:- Note:- Parts to be replaced will be measured and paid as supply only separately as mentioned below:-
all as above item No 69 but Supply only of Lub oil filter.
all as above item No 69 but Supply only of Fuel filter
all as above item No 69 but Supply only of Lubricant oil 15W/40 premium blue
all as above item No 69 but Supply only air filter paper element type
all as above item No 69 but Supply only coolant fluid for radiator
Servicing ,repairing & replacement of defective parts of AVR 10kVA to 30 kVA at ICGS Jakhau in and including Replacement of new Diode, Resistance plate, carbon brush, in and including rewinding with suitable copper wire etc, and testing complete all as directed
M&L for drain out the diesel from the diesel tank thoroughly to clean the dirt/sedimentation in the tank ,refilling the diesel to the tank and writing DOC in white colour letters on gen set canopy complete all as specified and directed by the Engr-in-charge :- Note: (i) Container for drain out and refilling of DHPP to be provided by the contractor.
M&L for servicing of self starter assembly of DG sets 24/12 volts of 125 /100 KVA Gen set locate at ICGS Jakhau by disconnecting the self starter assembly from the engine and dismantling, cleaning all accessories, replacing worn-out parts like carbon brushes, bushes, contact plates, jumping levels etc and rewinding the u/s field coil and varnishing all as directed by Engr-in-charge.
M&L for servicing of self starter assembly of DG sets 24/12 volts of 82.5/62.5 KVA Gen set locate at CGRA Naliya by disconnecting the self starter assembly from the engine and dismantling, cleaning all accessories, replacing worn-out parts like carbon brushes, bushes, contact plates, jumping levels etc and rewinding the u/s field coil and varnishing all as directed by Engr-in-charge.
Supply and fixing in replacement fuel pipe from tank to fuel filter with bunjo bolts and nuts as per sample length and size to meet the requirement of site condition.
M& L for Painting trolly of 30 KVA DG set by removing of old paint make the surface smooth for repainting, painting of trolly by two coat of synthetic enamel paint over a coat of red oxide and writing SM/MES No. as directed by Engineer-in-Charge.
M&L for Painting trolly of 62.5 KVA DG set by removing of old paint make the surface smooth for repainting, painting of trolly by two coat of synthetic enamel paint over a coat of red oxide and writing SM/MES No. as directed by Engineer-in-Charge
M&L for cleaning and decaling of 62.5 to 125 KVA radiator assembly by using suitable chemical and blower fan ,injecting water with high pressure in water tubings so as to remove all dirts in the fins, taking down the copper bottom portion of tank for welding / brazing and refit the same after replacing the unserviceable and damaged fins, tank cap, rubber bush and refix the same at the engine of DG sets complete all as per manufacturer's instructions and as directed.
S&F in replacement Gun-metal, globe or gate valve of size 50mm bore, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.
S&F in replacement Gun-metal, globe or gate valve of size 25mm bore, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.
S& F in replacement ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed all as specified and directed.
M&L for darning out complete mud and sludge of Anaerobic Zone of 80 MLD STP by using non clogging pumps and manually appx depth of vessel is 6.5 mtr from GL & removed silt /mud sludge etc to be dispose off away from the CGRA campus premises complete all as specified and directed by engineer-in-charge. (Note:- During cleaning Anaerobic Zone of STP alternative for dispose off raw sewage will be made by contractor and cost for the same deemed to be included in this item)
M&L for darning out complete mud and sludge of Sedimentation Zone of 80 MLD STP by using non clogging pumps and manually appx depth of vessel is 6.5 mtr from GL & removed silt /mud sludge etc to be dispose off away from the CGRA campus premises complete all as specified and directed by engineer-in-charge .
M&L for general overhauling of Air blower 5 HP of 80 MLD STP including replacement of lub oil as per existing grade and qty with greasing of grease point complete all as specified and directed.
Dismantling and Taking up unserviceable Non clog horizontal type sewage submersible pump , Capacity 6 HP, from 6m deep tank for rewinding & replacement of bearings/bushes and reassemble and fixing at original position making mechanical and electrical connection and testing complete all as specified and directed by Engineer - in - Charge.
S&F in replacement V-belt of air blower of 80 MLD STP complete all as specified and directed.
Taking down outlived MBBR media of sewage treatment plant and supply and replace MBBR media- small cylindrical shaped polyethylene carrier having specific gravity between 0.94 and 0.96 all as specified and directed.(Note:- Before payment contractor will produced purchase vouchers for verification of qty )
M&L for Replacement of DFM Filter Media of 80 MLD STP complete all as specified and directed.
Taking out exhausted Activated Carbon Filter media and supply and lay in proper manner Activated Carbon typically manufactured from coconut shell or charcoal, granular type suitable for Activated Carbon Media Filter of Sewage Treatment Plant. Media to be supplied duly packed in polythene bags all as specified and directed
M&L for Rewinding of sluge pump 1 HP of 80 MLD STP complete all as specified and directed.
S&F in Replacement of 6sqmm 3 core copper submersible cable complete all as specified and directed.
S&F in Replacement of Pressure gauge 4"dial 0-21 kgs rating complete all as specified and as directed.
Supply and fix in Replacement of Pressure switch Universal type complete all as specified and as directed.
S&F in Replacement of Butterfly valve of size 150 mm ,ISI marked with rubber gasket and flang joint complete all as specified and as directed.
S&F in Replacement of Butterfly valve of size 100 mm, ISI marked with rubber gasket and flang joint complete all as specified and as directed
Deduct credit for dismantled materials as per schedule of credit Rs 9,191.50.
GEE CEE ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .