Talli Pakholi water supply scheme Bironkhal Block Under Pauri Divison

SITC of Pump, Motor Spare Parts and Supplying ,carting , laying and jointing of G.I pipe (M) , Source work ,Reservoir& qualitative drinking water for each house hold and all other appurtenant works etc complete TALLI PAKHOLI, PANAS TALLA MALLA, MAHDEVSAIN, DANG water Supply scheme Under BIRONKHAL blocks in District Pauri. All rates shall be included all types of taxes and G.S.T. It is necessary the contractor will start the work from source to Distribution System. If any dispute in the source than other work will not done by the contractor

Construction of a Infilteration Well including supply of all material, labour, T&P etc complete

Construction of a cross wall including supply of all material labour T&P etc complete

Construction of Rapid Sand Filter of 0.60 MLD of 2 unit filter beds of 1.80 X 2.30 mtrs = 4.04 sqm. each including supply of all material,

Supply of all material, labour T&P and construct Flocculator unite as per drawing and design

Supply of all material, labour T&P and construct Settling Tank of 350 KL as per drawing and design

Supply of all material, labour T&P and construct Alum dosing-cum mixing chamber of .90M X.90M X1.0M size as per drawing and design

Supply of all material, labour T&P and construct 40 KL Back wash tank as per drawing and design

100 mm dia GI medium class perforated pipe having 10 mm dia holes 25 mm apart incluidng supplu of all amterial labour T&P etc complete

Provision of temporary divrsion of rive water to protect the excavation and other work etc

Provision of approach bridfe for pump house of minimum load bearing capacity of 1 Tonne per sqm ( mininmum span 9 M) with RCC calumn Abutement including all materials labour T&P etc compete

Provision of approachRoad for concstuction of infilteration well

Investigation, design and construction of following RCC SUMP / semi sunk reservoir including testing, cost of all pipes & fittings, supply and cartage of all material, Labour and T&P etc, complete. Structural design should be from IIT or equivalent institution. (Cap. in 130 KL)

Providing of all materials, carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MSERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of electrodes suitable for jointing of water supply lines(Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. All 4.80 mm and 3.20 mm thick MSERW Pipe. a) 125 mm 3.2 mm thick

b) 125 mm 4.8 mm thick

c) 100 mm dia

d) 80 mm dia

e) 50 mm dia

f) 40 mm dia

g) 32 mm dia

h) 25 mm dia

Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. For pipe line in following strata including supply of labour, T&P. etc complete. Assuming that 90% pipe line is laid in trenches, it is estimated that 75% excavation will be in soil mixed with shingle, bajri & boulders and rest 25% will be in medium rock. a) In soil mixed with boulders

b) In soft rock

Cartage of following pipes, specials & fittings from Kotdwar to site store for proper completion of works. A) 125 mm 3.2 mm thick

b) 125 mm 4.8 mm thick

c) 100 mm dia

d) 80 mm dia

e) 50 mm dia

f) 40 mm dia

g) 32 mm dia

h) 25 mm dia

Supply and fixing of the following fittings including cartage of materials, labour and T&P etc. complete. A) for8 0 mm dia

b) for 50 mm dia

c) for 40 mm dia

d) for 32 mm dia

e) for 25 mm dia

Supply of all materials, labour and T&P etc. and construct following valve chambers as per type design. Wheel Valve Chamber 45cm x 45cm size

Supply of all materials, labours, T.&P. etc. and construct Anchor Blocks as per type design complete. A) 1.30 m X 1.30 m X 1.30 m

b) 1.40 m X 1.40 m X 1.40m

c) 1.60 m X 1.60 m X 1.60m

d 1.80 m X 1.80 m X 1.80m

Investigation, design and construction of following RCC CWR / semi sunk reservoir including testing, cost of all pipes & fittings, supply and cartage of all material, Labour and T&P etc, complete. Structural design should be from IIT or equivalent institution. (Cap. in KL) a) 75 Kl

Supply and installation of bucket type chlorinator of 25 liters capacity including bleeching powder solution doser, chloroscope kit with stop cock & iron cage fabricated with 25 mm x 25 mm square mesh with locking arrangements below dozer to protect flexible pipe connection with CWR complete with all arrangements in position.

Providing Functional House hold tap Connection (FHTC) from exiting supply main to House hold including with Laying & Jointing of 15 mm G.I Pipe (Medium)line including Excavation of Earth work upto Requried depth , Plain Cement Concret etc, including all materials and Labours etc as per direction of Site Encharge for Proper completion of work.

Investigation, design and construction of following Pump House including testing, cost of all materials & fittings, supply and cartage of all material, Labour and T&P etc, complete. Structural design should be from IIT or equivalent institution.

Investigation, design and construction of following Staff quarter Type_I including testing, cost of all materials & fittings, supply and cartage of all material, Labour and T&P etc, complete. Structural design should be from IIT or equivalent institution.

Protection works R.R.1:6 Stone masonry

Protection works R.R.dry Stone masonry

At Intake well SITC of suitable 1000 LPM 32 mtr head slow speed raw water multistage centrifugal pump with suitable motor inculding base frame for motor/Pump foundation, Cupling, Cupling gurd, Suitable accessories Pin bush, Nut Bolt, T&P labour etc complete

SITC of Suitable Autometed Control pannel for above motor pump including base frame with suitable foundation accessories ,T&P, labour etc complete

SITC of Suitable cable, cable trenchs for above motor and pump with suitable accessories M.S fabrications cable glands, drains, T&P ,labour etc complete in supervison of Engineer encharge

SITC of Suitable sluice valves in sanction and dilivery points and Non Return valves in dilevery point with all accessories, Nut Bolts, Packing sheet, Flanges, labour, T&P etc Complete in supervision of Engineer Incharge

At MPS SITC of 500 LPM 502 mtr head suitable high speed multistage centrifugal pump with suitable motor inculding base frame for motor/Pump foundation, Cupling, Cupling gurd, Suitable accessories Pin bush, Nut Bolt, T&P, labour etc complete

SITC of Suitable Autometed Control pannel for above motor pump including base frame with suitable foundation accessories T&P labour etc complete

SITC of Suitable bale and cable trenchs for above motro and pump with suitable accessories M.S fabrications cable glands, drains,T&P, labour, etc complete in supervison of Engineer encharge

SITC of Suitable sluice valves in sanction and delivery points and Non Return valves in dilevery point with all accessories, Nut Bolts, Packing sheet, Flanges, labour, T&P etc Complete in supervision of Engineer Incharge

Testing of Pipe and other

Godown and Hiring charges

Advertisement board (SIZE 0.90 x 0.60 Mtr.)