Khand Raiwala WATER SUPPLY SCHEME

Laying of Pipe Line, SITC Electrical Equipment and related works under Khand Raiwala Water Supply Scheme.

Pump and Related Electrical Items - Supply, Installation, Testing and commissioning (SITC) on turnkey basis for Fully Automatic Pump atomation control panels of different capacities having intelligent unit having FIELD PROGRAMMABLE LOGIC CONTROLLERS based SCADA Operated Pump Motor Start, Run Control Protect against Faults Automatically operated Control & management system for supervisory Control and data Acquisition System at punching water supply schemes & Two years Free of cost A. M. C for warranty period of following duties as per specifications sheet enclosed & suitable for integration in the existing system including cartage from work of manufacture upto site of work:- (16-40)HP

IOT Based Water Monitoring System including all Sensors (Residual Chlorine sensors,Pressure sensor) ,Mechanical flow meter & all related items.

Supply , Installation , Testing & Commissioning of 48000 LPH (800 LPM) for 20 HRs. per day operation including Lodging Boarding and Conveyance in all at site with 12 months guaranteed period. With Annual Comprehensive Maintenance Contract (ACMC) with Chemical , Consumables and all components for 48000 LPH (800 LPM) Ultra Filtration Plant I/c Following Things- 1- For the 1st Yea Under Warranty

Supply of dry dial,Woltman type,Magnetically coupled class-B tamper proof Bulk Water Meters with removable mechanism ,megnetic drive,hermetically scaled ,pre-equipped for remote reading as per IS:2373-1981 and ISO:4064 standard with EEC/MID certification mark shall be with protection class of IP68 for wireless AMR water meter with guarantee/warranty of following sizes along with strainer.- At Source - 100 mm dia

Civil Work : 3.0 Distribution Network & Related Components - For Pipe Laying - Dismantling of flexible pavements and disposal ofdismantled materialsupto alead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 (Considering 30%)

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately (Considering 30%)

Excavation in Pipe Line TrenchesExcavation in ordinary soil (loam, clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation trenches or in to the plinth (75% of Total Quantity)

Excavation in soil mixed with shingle bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling,waterring and ramming of Excavated earth in the trenches.(25% of Total Quantity)

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.G.I. PIPE CONFORMING TO IS : 1239(PART-1) Medium Duty (Class 'B')

HDPE pipe for water supply conforiming to IS:4984-1995 - Proving of all materials, carting from site store to site of work, lowering into trenches with true to alignment, Laying & Jointing of full lengths of HDPE pipes, completion of work with testing of pipe line including supply of Jointing materials & specials. - PE-100, Normal Pressure(PN)-10 in 10 kg/cm2 - 63 mm dia

75 mm dia

90 mm dia

110mm dia

Supplying of DI Valves Including Carting the same upto the site of work as per engineering norms (with cap) complete with bolts, nuts, rubber insertions etc. anywhere in uttarakhand. - D.I. Sluice/ Gate Valve - Pressure PN 1.0 - 50 mm dia

65 mm dia

80 mm dia

100 mm dia

Installation, testing and commissioning of Sluice valve as per engineering norms anywhere in - D.I. Sluice/ Gate Valveuttarakhand. - Pressure PN 1.0 - 50 mm dia

65 mm dia

80 mm dia

100 mm dia

D.I. Sluice Valve (Scouring purpose) (PN-1.00) - 65 mm dia

Installation, testing and commissioning of Sluice valve (Scouring purpose) as per engineering norms anywhere in uttarakhand. - D.I. Sluice Valve (Scouring purpose) (PN-1.00) - 65 mm dia

Supplying of Air Valves as per engineering norms of approved quality with bolts, nuts, rubber insertions etc. complete anywhere in uttarakhand - D.I. Air Valve along with Isolating valve - 50mm dia

Installation, testing and commissioning of Air Valves as per engineering norms anywhere in uttarakhand. - D.I. Air Valve along with Isolating valve - 50mm dia

Supplying and Fixing of Fire Hydrant Valve IS 5290 (Flanged) Including carting the same upto site of work and fixing the same and water supply line Including the cost of valves,specials,labour and T&P Complete in all respect. - 80 mm diameter

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. For different types of valves.

Supply,Installation,Testing and Commissioning of Full Bore Electromagnetic Flow Meter for Lines of followoing Sizes Comprising of Flow Tube Sensor with Transmitter cum Display unit and facility to provide data communication signal over Modbus 485 Port Pulse output and 4-20mA Signal output with Flanges, Clamps etc - At Outlet of OHT - 150 mm

Supply of all labour, material required for restoring of existing house connection which might be damage during excavation and also shifting all existing connection to new water supply system from existing water supply system complete as per unit estimate and directed by Engineer in-charge. 15 mm size water connections.(Considering 20% of 2020 Households)

Providing and making house service connections from water supply distribution GI pipe line upto water meter chamber inside the property using GI pipe including supply and fixing of electrofussion saddle ,brass ferrules elbow, ball valve etc complete with earthwork, road cutting with restoration works system from existing water supply system complete as per unit estimate and directed by Engineer in-charge. 20 mm size water connections.

Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube osts/horizontal members/ bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m.

Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383,maximum size ofcoarse aggregate notexceeding 25 mm,mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

Operation & Maintenance (3 Months) & Pipe Testing - Operation & Maintenance Cost for Trail and Testing of Pipes.

Testing of Pipes (G.I ,HDPE & D.I) which includes a)Parameters(Physical & Chemical) b)Tensile Sterngth Properties

HARSH PATI SEMWAL

SHREE BANKEY BIHARI UDYOG

Yakub Ali

IMAGINATION ENVIRONMENTAL SOLUTIONS PVT LTD