Kerala

Active

Works

Civil Works - Buildings

GENERAL-PWD College of engineering, Thiruvananthapuram - Refurbishment of the existing false ceiling and replacement of damaged roofing sheet in the second floor of the Computer Science Department -Repair- General Civil Work

Public Works Department

O/o, Executive Engineer, Special Buildings Division | Thiruvananthapuram, Kerala

Amount: ₹21.1 LCloses: 17 Oct 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes17 Oct 2026
Bid Opening19 Oct 2026

Tender Value

₹21.1 L

EMD Value

₹50,000

Closing Date

17 Oct 2026, 6:00 pm6d left

Tender Inviting Organisation

Name

Executive Engineer

Address

O/o,Executive Engineer, Special Buildings Division, Public Office Compound, Thiruvananthapuram

Work Description

GENERAL-PWD College of engineering, Thiruvananthapuram - Refurbishment of the existing false ceiling and replacement of damaged roofing sheet in the second floor of the Computer Science Department -Repair- General Civil Work

Tender Information

Tender ID

2026_PWD_877237_1

Reference Number

PWD/BLDG/TR/16563/2025_5_1_1/1

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

O/o, Executive Engineer, Special Buildings Division

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredPreliminary agreement (.pdf)

RequiredE payment form (.pdf)

RequiredCopy of GST Registration of the Contractor and Attested copy of Licence (.pdf)

RequiredStandard Bid Documents duly filled and signed (.pdf)

RequiredEMD Exemption if applicable (.pdf)

RequiredForm of tender, Integrity pact certificate and affidavit (.pdf)

RequiredTender schedule (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,760

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹50,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

19 Oct 2026

Download Starts

7 Oct 2026

Download Ends

17 Oct 2026

Submission Starts

7 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1WORKS
1.001	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	664	sqm	-	-
1.002	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	1,337.6	sqm	-	-
1.003	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	43	metre	-	-
1.004	13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work	148.35	sqm	-	-
1.005	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	2,743.65	kg	-	-
1.006	15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge	491.72	sqm	-	-
1.007	OD50946/2026-2027:Labour charges for fixing departmentally supplied tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 false ceiling in MS tubular frame work with necessary screws etc complete ( frame work shall be paid separately) as directed by Engineer-in-Charge.	412	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

epay.pdf

Tender Documents • 0.04 MB

fot.pdf

Tender Documents • 0.11 MB

viewsbd.pdf

Tender Documents • 1.64 MB

IntegrityPact.pdf

Tender Documents • 0.03 MB

AFFIDAVIT.pdf

Tender Documents • 0.15 MB

BOQ_1490535.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1WORKS
1.001	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	664	sqm	-	-
1.002	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	1,337.6	sqm	-	-
1.003	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	43	metre	-	-
1.004	13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work	148.35	sqm	-	-
1.005	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	2,743.65	kg	-	-
1.006	15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge	491.72	sqm	-	-
1.007	OD50946/2026-2027:Labour charges for fixing departmentally supplied tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 false ceiling in MS tubular frame work with necessary screws etc complete ( frame work shall be paid separately) as directed by Engineer-in-Charge.	412	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1WORKS

1.001

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

664

sqm

1.002

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

1,337.6

sqm

1.003

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

metre

1.004

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

148.35

sqm

1.005

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

2,743.65

1.006

15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

491.72

sqm

1.007

OD50946/2026-2027:Labour charges for fixing departmentally supplied tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 false ceiling in MS tubular frame work with necessary screws etc complete ( frame work shall be paid separately) as directed by Engineer-in-Charge.

412

sqm