MP LADS 2023 2024 Construction of a Byepass square and dividers in K M Mani Byepass road at Pala Civil station Junction in Pala Municipality Electrification General Electrical Work

OD150089/2025-2026:Supply and installation of under water light fitting having high purity lenses with tempered glass LED RGBW 12 W IP 68 Luminaire with minimum IK 08 protection operating in 24 V DC with external driver type, hard chrome plated moulding stainless steel, high efficiency long life LED, glass and housing silicon sealed, with minimum 50000 burning hours and electrical installation class1 ( wipro model LU04 151-60CCW-XX or Equivalent)

OD155004/2025-2026:Supply and installation of 120W driver with required connectors

OD150729/2025-2026:Supply, installation, testing and commissioning of 1 Phase 2Hp/1.5kW, 240V, 50Hz Submersible motor pumpset conforming to IS capable to discharge 70-90 Mtr Head range 2860-3400 LPH 32 mm size and standard accessories as per the direction of department staff at the site.

90.14.28.2:S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor

90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

OD182925/2025-2026:Supply and fixing LED indicator (6 V AC/DC, 12V AC/DC, 24 V AC/DC, 48V AC/DC, 63.5V AC/DC, 110 V AC/DC, 220V DC, 240 V AC), 22.5 mm cut out diameter... Red, Green, Blue colors... with neccesary control wiring

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board