Strengthening of Jaspur First Water Supply Scheme in Dhari, Nainital

Amount

SCC cum Roughening Filter:Supply of all materials,labour T&P etc. for construction of Boulder Filled Gallery complete in all respects

Supply of Electronically Controlled, Electrically Actuated, Diaphragm Operated, Chemical Metering Pump, Wall Mounting Suitable for Delivering upto 6 litres of Chemical Solution / Sodium Hypo Chloride Solution Per Hour Under Maximum Delivery Pressure upto 6 Kg/cm2 & Suction Lift Not Less Than 1.5 Metre With Accessories.(i.e. including valve,nozel,tank etc complete)

Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)-GI wire 10 gauge BWG

Excavation in Pipe Line Trenches: Excavation in ordinary soil (loam, clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation trenches or in to the plinth (75% of Total Quantity)

Excavation in soil mixed with shingle bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling,waterring and ramming of Excavated earth in the trenches.(25% of Total Quantity)

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.G.I. PIPE CONFORMING TO IS : 1239(PART-1) Medium Duty (Class 'B')

15 mm dia GI Pipe

20 mm dia GI Pipe

25 mm dia GI Pipe

32 mm dia GI Pipe

40 mm dia GI Pipe

50 mm dia GI Pipe

65 mm dia GI Pipe

80 mm dia GI Pipe

Supplying of Brass/G.M. Sluice Valves Including Carting the same upto the site of work as per engineering norms (with cap) complete with bolts, nuts, rubber insertions etc. anywhere in uttarakhand. Brass/G.M. Valve

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

Supplying of Air Valves as per engineering norms of approved quality with bolts, nuts, rubber insertions etc. complete anywhere in uttarakhand. C.I. Air Valve (Screwed). 20 mm dia

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing & fixing of woltman type Bulk metre

50 mm dia

65 mm dia

80 mm dia

100 mm dia

Supply of all labour, material required for restoring of existing house connection which might be damage during excavation and also shifting all existing connection to new water supply system from existing water supply system complete as per unit estimate and directed by Engineer in-charge. 15 mm size water connections.

Interconnection of new pipe line to existing pipe line including necessary cutting, supply and Installation of required specials fittings all as per direction of Engineer-In- Charge.

Providing and making house service connections from water supply distribution GI pipe line upto water meter chamber inside the property using GI pipe including supply and fixing of electrofussion saddle ,brass ferrules elbow, ball valve etc complete with earthwork, road cutting with restoration works

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.

100 mm dia 5.2 thickness

80 mm 5.5 Thicknesas

50 mm 4.8 Thicknesas

Providing & Fixing DI non Retrn valve. D.I D.F non Retrn valve. PN 10

50 MM DIA

80 mm dia

100 mm dia

Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside the tank and alluminium ladder inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator,supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2.

SUMP 50 KL (IPS-1)

SUMP 100 KL (IPS-2)

SUMP 100 KL (IPS-3)

50 KL at Talla Gahna

7.5 KL at Malla Gahna

55 KL CWR at Sunkiya

Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)-GI wire 10 gauge BWG

Construction of RCC Pillars For supporting of pipes

Anchor Block (Details attached as separate estimate) (Size:- 1.20 m x 1.20 x 1.20 m)

Supply of all materials and construction of Pump house as per type design and drawing complete.

Repairing of existing pump house

S.I.T.C. OF KIRLOSKAR MAKE CENTRIFUGAL PUMP SET CAPACITY 50 HP, HEAD 450 MTR, DISCHARGE 300 LPM WITH BRONZE IMPELLER, HEAVY DUTY BASE FRAME , COUPLING AND COUPLING GUARD.

S.I.T.C. CG MAKE MOTOR FOR ABOVE PUMP 50 HP 2900 RPM

S.I.T.C. OF FULLY AUTOMATIC STARTER PANEL CAPACITY:50 HP

Control Panel

Main Piping & Valves a. CI D/F Sluice Valves PN1.0 – 02 Nos. b. CS D/F Sluice Valves Class 300 ASA – 04 Nos.(100mm dia) c. CS D/F Reflux valve class 300 ASA-02 Nos. (100mm dia) d. Necessary Pipe & Fittings-

S.I.T.C. OF KIRLOSKAR MAKE CENTRIFUGAL PUMP SET CAPACITY 30 HP, HEAD 300 MTR, DISCHARGE 250 LPM WITH BRONZE IMPELLER, HEAVY DUTY BASE FRAME , COUPLING AND COUPLING GUARD.

S.I.T.C. CG MAKE MOTOR FOR ABOVE PUMP 30 HP 2900 RPM

S.I.T.C. OF FULLY AUTOMATIC STARTER PANEL CAPACITY:30 HP

Control Panel

Main Piping & Valves a. CI D/F Sluice Valves PN1.0 – 02 Nos. b. CS D/F Sluice Valves Class 300 ASA – 04 Nos.(80mm dia) c. CS D/F Reflux valve class 300 ASA-02 Nos. (80mm dia) d. Necessary Pipe & Fittings-

S.I.T.C. OF KIRLOSKAR MAKE CENTRIFUGAL PUMP SET CAPACITY 25 HP, HEAD 260 MTR, DISCHARGE 200 LPM WITH BRONZE IMPELLER, HEAVY DUTY BASE FRAME , COUPLING AND COUPLING GUARD.

S.I.T.C. CG MAKE MOTOR FOR ABOVE PUMP 25 HP 2900 RPM

S.I.T.C. OF FULLY AUTOMATIC STARTER PANEL CAPACITY:25 HP

Control Panel

Main Piping & Valves a. CI D/F Sluice Valves PN1.0 – 02 Nos. b. CS D/F Sluice Valves Class 300 ASA – 04 Nos.(50mm dia) c. CS D/F Reflux valve class 300 ASA-02 Nos. (50mm dia) d. Necessary Pipe & Fittings-

Painting

S.I.T.C. OF KIRLOSKAR MAKE CENTRIFUGAL PUMP SET CAPACITY 20 HP, HEAD 270 MTR, DISCHARGE 100 LPM WITH BRONZE IMPELLER, HEAVY DUTY BASE FRAME , COUPLING AND COUPLING GUARD

S.I.T.C. CG MAKE MOTOR FOR ABOVE PUMP 20 HP 2900 RPM

S.I.T.C. OF FULLY AUTOMATIC STARTER PANEL CAPACITY:20 HP

Control Panel

Main Piping & Valves a. CI D/F Sluice Valves PN1.0 – 02 Nos. b. CS D/F Sluice Valves Class 300 ASA – 04 Nos.(50mm dia) c. CS D/F Reflux valve class 300 ASA-02 Nos. (50mm dia) d. Necessary Pipe & Fittings-

Painting

SERVO VOLTAGE STABLIZER COMPLETE (IPS-1) Supply of three phase digital rolling contact servo voltage stabilizer suitable for unbalance voltage & load including fixing of proper size copper lugs on input and output cables on both ends at different sites on trunkey basis including 5 years cost free maintenance Input voltage 330-460 volts (Phase to phase) Capacity - 40 kva(According to Availablity)

SERVO VOLTAGE STABLIZER COMPLETE (IPS-2) Supply of three phase digital rolling contact servo voltage stabilizer suitable for unbalance voltage & load including fixing of proper size copper lugs on input and output cables on both ends at different sites on trunkey basis including 5 years cost free maintenance Input voltage 330-460 volts (Phase to phase) Capacity - 40 kva (According to Availablity)

Geetaram Saini