REPAIR TO CERTAIN MISC WORKS IN ZONE A UNDER AGE B/R-I AT MIL STN BHUJ UNDER GE(A) BHUJ

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in Concrete, brick work, masonry, etc. , including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron, fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F PVC coated Chain link fencing of mesh size 75x75mm , diameter of GI wire 3 mm thick complete all as specified and directed.

M&L preparation of new surfaces of steel and providing 2 coat of Synthetic enamel paint over one coat primer n.exc 10cm in girth complete all as specified and directed.

M&L for MS round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking endss and binding with MS wire 0.9 mm dia annealed all as specified confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, ach screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long complete all as specified and directed.

M&L galvenised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing and tying at crossings with and provisions of galvanised mild steel wire staple or steel pins etc complete all as specified and directed.

Preparation of new iron and steel surfaces of any description over 10cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down barbed wire any specification complete all as specified and directed.