Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹11.8 L
EMD Value
₹29,567
Closing Date
27 Dec 2025, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer , PWD Buildings Division , Idukki
GENERAL Resurvey Assistant Director Mini Civil Station Additional Block Thodupuzha Maintenance including cabin work General Civil Work
2025_PWD_822554_1
07/EE/BL/IDK/2025-26(Retender)
Open Tender
Civil Works - Buildings
Item Rate
180 days
Thodupuzha
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,760
Yes
₹29,567
Yes
18 Dec 2025
18 Dec 2025
29 Dec 2025
18 Dec 2025
27 Dec 2025
18 Dec 2025
Work Name:GENERAL-Resurvey Assistant Director, Mini Civil Station Additional Block, Thodupuzha-Maintenance including cabin work-General Civil Work
朠癩湡攠敶桳摡伺敮漠潭敲挠慯獴漠汯潷歲⸵㌲ㄮ䐺獩慭瑮楬杮琠汩潷歲椠汦潯獲愠摮爠潯獦氠楡湩挠浥湥⁴潭瑲牡椠据畬楤杮猠慴正湩慭整楲污眠瑩楨〵洠瑥敲敬摡䘮牯琠楨正敮獳漠楴敬〱洠潴㈠‵浭ç⸵⸲㨲敄潭楬桳湩散敭瑮挠湯牣瑥慭畮污祬⼠戠⁹敭档湡捩污洠慥獮椠据畬楤杮搠獩潰慳景洠瑡牥慩楷桴湩㔠‰敭牴獥氠慥獡瀠牥搠物捥楴湯漠湅楧敮牥ⴠ椠桃牡敧丮浯湩污挠湯牣瑥㨱㨴‸牯氠慥敮業⁸ 湩汣摵湩煥極慶敬瑮搠獥杩業⥸挀浵Ç⸷㠱ㄮ债潲楶楤杮愠摮映硩湩⹐⹖⹃氠睯氠癥汥映畬桳湩楣瑳牥楷桴洠湡慵汬⁹潣瑮潲汬摥搠癥捩栨湡汤敬敶⥲挠湯潦浲湩潴䤠㩓㜠㌲ⰱ眠瑩污楦瑴湩獧愠摮映硩畴敲潣灭敬整ㄮ‰楬牴慣慰楣祴ⴠ圠楨整¡㔀⸰㐱ㄮ㈮刺浥癯湩湡敲楦楸杮眠湩潤⁷桳瑵整獲愠瑦牥渠捥獥慳祲爠灥楡獲映牯攠獡⁹灯湥湩湡汣獯湩瑥潣灭敬整愠数桴楤敲瑣潩景猠瑩湅楧敮牥椭档牡敧ͪ㈀⸱⸱⸱㨲牐癯摩湩湡楦楸杮愠畬業楮浵眠牯潦潤牯ⱳ眠湩潤獷敶瑮汩瑡牯湡慰瑲瑩潩獮眠瑩硥牴摵摥戠極瑬甠⁰瑳湡慤摲琠扵汵牡猠捥楴湯⽳愠灰潲牰慩整娠猠捥楴湯湡瑯敨敳瑣潩獮漠灡牰癯摥洠歡潣普牯業杮琠卉㨠㜠㌳愠摮䤠㩓ㄠ㠲ⰵ映硩湩楷桴搠獡慦瑳湥牥景爠煥極敲楤湡楳敺湩汣摵湩敮散獳牡⁹楦汬湩灵琠敨朠灡瑡樠湵瑣潩獮愠⁴潴Ɒ戠瑯潴湡楳敤楷桴爠煥極敲偅䵄爠扵敢⽲渠潥牰湥慧歳瑥攠捴汁浵湩畩敳瑣潩獮猠慨汬戠浳潯桴畲瑳映敲ⱥ猠牴楡桧ⱴ洠瑩敲湡潪湩整敭档湡捩污祬眠敨敲敶敲畱物摥椠据畬楤杮挠敬瑡愠杮敬汁浵湩楮浵猠慮⁰敢摡湩潦汧穡湩瀯湡汥湩Ⱨ䌠倮牢獡⽳猠慴湩敬獳猠整汥猠牣睥ⱳ愠汬挠浯汰瑥獡瀠牥愠捲楨整瑣牵污搠慲楷杮湡桴楤敲瑣潩獮漠湅楧敮牥椭档牡敧⠮汇穡湩Ⱨ瀠湡汥湩湡慤桳映獡整敮獲琠敢瀠楡潦敳慰慲整祬㨩䘊牯映硩摥瀠牯楴湯潐摷牥挠慯整污浵湩畩洨湩浩浵琠楨正敮獳漠潰摷牥挠慯楴杮㔠‰業牣湯ȩ杫ō㈀⸱⸱⸲㨲潆桳瑵整獲漠潤牯ⱳ眠湩潤獷☠瘠湥楴慬潴獲椠据畬楤杮瀠潲楶楤杮愠摮映硩湩楨杮獥⼠瀠癩瑯湡慭楫杮瀠潲楶楳湯映牯映硩湩景映瑩楴杮桷牥癥牥爠煥極敲湩汣摵湩桴潣瑳漠偅䵄
rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)´21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sidesw21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) Ô21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete>9.84:Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.»9.68.1:Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. (Copper oxidized as per IS : 1378).300 mm weighing not less than 200 gms14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm)®9.63.2:Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (Copper oxidized as per IS : 1378)200x10 mm650.9.15.1:Supplying and fixing 200 mm Aluminium aldropY14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)Ã18.58.2.1:Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round gratingú14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .¢OD84169/2025-2026:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), excluding grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm.711.48.2:Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mmÈ10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.kilogramµ22.5:Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
Work Name:GENERAL-Resurvey Assistant Director, Mini Civil Station Additional Block, Thodupuzha-Maintenance including cabin work-General Civil Work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.34 MB
Tendernotice_2.pdf
PDF • 0.26 MB
Tendernotice_3.pdf
PDF • 0.22 MB
Tendernotice_4.pdf
PDF • 0.25 MB
Tendernotice_5.pdf
PDF • 0.18 MB
Tendernotice_6.pdf
PDF • 0.05 MB
Tendernotice_7.pdf
PDF • 2.58 MB
BOQ_1378615.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .