Up-gradation of CF Residence Baramulla

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : : Of area beyond 3 sqm.

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm and above.

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm.

Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

French spirit polishing, Two or more coats on new works including a coat of wood filler

Engagement of 1st Class Carpenter for fabrication, fitting, assembling and fixing of wooden Panelling, shutters, Planks and other joinery works using departmental-supplied timber, including cutting, plaining, grooving, shaping, chiselling, drilling, fitting, finishing, labour, tools, plants and all incidental charges (excluding cost of timber and major hardware), using wood of thickness 20 mm or above complete as per the directions of the Engineer-in-Charge.

Providing and fixing first-class marine grade plywood with a thickness of 19 mm for internal and external wall lining work. The plywood shall have a density of 811 kg/m³ (observed value) and shall be ISI marked to ensure quality. It shall include a 20-year replacement warranty and shall have a moisture content ranging from 5-15% (criteria) with an observed value of 9.2%. The plywood shall be water-resistant, with a perpendicular to grain strength of 34.5 N/mm² (observed value), exceeding the minimum criteria of 25 N/mm². It shall also have a glue adhesion in the dry state of at least 1350 and resistance to water with an observed value of 1233, surpassing the minimum required 1000. The parallel to grain strength shall be a minimum of 40, and the plywood type shall meet the criteria with observed values for various properties, ensuring durability and performance. The rate shall include nails or required gluing work and carriage up to the site of work

Providing and fixing premium quality natural Teak veneer (minimum 0.6 mm thick) over plywood surfaces, including preparation of surface, application of approved adhesive (Fevicol SH or equivalent), edge lipping, necessary pressing, sanding, polishing/melamine finish, and all required materials, tools, labour, fittings, and accessories complete to achieve a smooth and uniform finished surface as approved by the Engineer-in-Charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.12 mm thick Fire retardant plywood conforming to IS: 5509