Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC H NO 05 AASI BAUG OPP VATSALYA SCHOOL BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹41.4 L+₹3.0 L (7.80%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹45.2 L+₹6.8 L (17.7%)Rejected-Finance | L3 | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | M/s Bombay Novelty Stores L2 | sudarshan builders L3 | Ahmed B Khatri L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out in soft soil for pipe trenches all as specified and as directed. ( Note - Trenches shall be excavated for water supply pipe lines all as detailed under MES Schedule Part-I clause 18.42 to 18.42.6) complete all as specified and directed by Engineer-in-Charge | 320 | CUBIC METRE | 300 ₹96,000 | 250 ₹80,000 | 150 ₹48,000 Lowest |
| 2.00 | Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out in hard soil for pipe trenches all as specified and as directed. ( Note - Trenches shall be excavated for water supply pipe lines all as detailed under MES Schedule Part-I clause 18.42 to 18.42.6) complete all as specified and directed by Engineer-in-Charge | 40 | CUBIC METRE | 450 ₹18,000 | 300 ₹12,000 | 200 ₹8,000 Lowest |
| 3.00 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of soils complete all as specified and directed by Engineer-in-Charge. | 300 | CUBIC METRE | 100 ₹30,000 | 200 ₹60,000 | 60 ₹18,000 Lowest |
| 4.00 | Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge. | 60 | CUBIC METRE | 200 ₹12,000 | 150 ₹9,000 | 80 ₹4,800 Lowest |
| 5.00Taking up/down existing old DI/GI tubing alongwith fixed connections and fittings from walls and ceilings trenches,under floor or road and to reuse of servicable portion if any complete all as specified and directed by Engineer-in-Charge of following sizes : - | ||||||
| 5.01 | 300 mm bore | 10 | RUNNING METRE | 150 ₹1,500 | 200 ₹2,000 | 50 ₹500 Lowest |
| 5.02 | 250 mm bore | 40 | RUNNING METRE | 120 ₹4,800 | 150 ₹6,000 | 40 ₹1,600 Lowest |
| 5.03 | 200 mm bore | 20 | RUNNING METRE | 100 ₹2,000 | 150 ₹3,000 | 30 ₹600 Lowest |
| 5.04 | 150 mm bore | 20 | RUNNING METRE | 80 ₹1,600 | 100 ₹2,000 | 20 ₹400 Lowest |
| 5.05 | 100 mm bore | 95 | RUNNING METRE | 50 ₹4,750 | 60 ₹5,700 | 15 ₹1,425 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 Jul 2025, 6:00 pmClosed
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
REPAIRS AND MAINTENANCE OF CORRODED WATER PIPE LINE AT VARIOUS LOCATION IN DOMESTIC AND TECH AREA, CLEANING OF OH AND UG SUMPS AND OTHER MISC CONNECTED ITEMS AT AF STN BHUJ
2025_MES_718149_1
8837/V/E8
Open Tender
Water Equipments/ Meter/ Drilling/ Boring
Item Rate
270 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
GE (AF) BHUJ
₹90,000
Yes
29 Sept 2025
2 Jul 2025
28 Jul 2025
2 Jul 2025
26 Jul 2025
14 Jul 2025
5 Jul 2025 - 7 Jul 2025
Amount
Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out in soft soil for pipe trenches all as specified and as directed. ( Note - Trenches shall be excavated for water supply pipe lines all as detailed under MES Schedule Part-I clause 18.42 to 18.42.6) complete all as specified and directed by Engineer-in-Charge
Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out in hard soil for pipe trenches all as specified and as directed. ( Note - Trenches shall be excavated for water supply pipe lines all as detailed under MES Schedule Part-I clause 18.42 to 18.42.6) complete all as specified and directed by Engineer-in-Charge
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of soils complete all as specified and directed by Engineer-in-Charge.
Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.
Taking up/down existing old DI/GI tubing alongwith fixed connections and fittings from walls and ceilings trenches,under floor or road and to reuse of servicable portion if any complete all as specified and directed by Engineer-in-Charge of following sizes : -
300 mm bore
250 mm bore
200 mm bore
150 mm bore
100 mm bore
80 mm bore
50 mm bore
40 mm bore
25 mm bore
20 mm bore
15 mm bore
Relaying only GI tubing medium garde in trenches/wall/ceiling obtained from item No 5 here-in-before after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as specified and directed by Engineer-in-Charge of following sizes : -
100 mm bore
80 mm bore
50 mm bore
40 mm bore
25 mm bore
20 mm bore
15 mm bore
Material & labour for galvanised steel tubes"medium grade" (ISI marked) with all fitting(ISI marked) and fixed complete to walls and ceilings or laid in floor/trenches and under road complete all as specified and directed by Engineer-in-Charge of following sizes : -
100 mm bore
80 mm bore
50 mm bore
40 mm bore
25 mm bore
20 mm bore
15 mm bore
Taking up/down existing old UPVC/CPVC tubing alongwith fixed connections and fittings from walls and ceilings trenches,under floor or road and to reuse of servicable portion if any complete all as specified and directed by Engineer-in-Charge of following sizes : -
100 mm bore
80 mm bore
50 mm bore
40 mm bore
25 mm bore
20 mm bore
15 mm bore
Relaying only UPVC/CPVC in trenches/wall/ceiling obtained from item No 8 here-in-before after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as specified and directed by Engineer-in-Charge of following sizes : -
100 mm bore
80 mm bore
50 mm bore
40 mm bore
25 mm bore
20 mm bore
15 mm bore
Supply and laying UPVC pipes with all fittings and fixtures laid in trenches,fixed complete to walls with GI clamps and ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge of following sizes : -
100 mm bore
80 mm bore
50 mm bore
40 mm bore
25 mm bore
20 mm bore
15 mm bore
Supply and laying CPVC pipes of pressure rating 10Kg/sqcm class 2 (SDR 13.5) with fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc., as required at site on walls, ceilings and in floors complete all as specified and directed by Engineer-in-Charge of following sizes : -
25 mm bore
20 mm bore
Material & labour for attending the emergent repairs to leakage/ damage GI/UPVC pipe of under mentioned size including carrying out minor repairs etc as required to make the system in order / functional and necessary excavation, returning, filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed by Engr-in-charge. NOTE:- (a) Excavation earthwork cost is included in the quoted rate. (b) Cost of bend, Tee, elbow, and socket or any other items are included in the quoted rate
up to 25 mm dia
40 to 100 mm dia
Material & labour for attending the emergent repairs to size 150 to 300 mm dia leakage/ damage DI pipe of under mentioned size including carrying out minor repairs etc as required to make the system in order / functional and necessary excavation, returning, filling of soils and removal of water by using pump,cutting out DI pipe at and jointing with new fittings, accessories such as bends (any type, radius and angle) tapers any type (straight /bend, increasing, decreasing or double socket etc) Tee pieces single branch 'Y' junction, double branch cross, collars, caps & plugs,Tyton Joint etc complete all as specified and as directed by Engr-in-charge. NOTE:- (a) Cost of T & P required for excavation and earthwork is included in the quoted rate. (b) Cost of fittings or any other items shall be measured under revelant items.
Supply & fix in replacement of gun metal gate valve/forged valve with iron wheel head,screwed both ends for jointing iron pipre,non rising,forged brass spindle class-1,IS-778 marked complete all as specified and directed by Engineer-in-Charge of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply & fix in replacement of UPVC gate valves, screwed/plain both ends for iron/pvc pipe complete all as specified and directed by Engineer-in-Charge of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
100 mm bore
Supply & fix in replacement of CPVC gate valves, screwed/plain both ends for iron/pvc pipe complete all as specified and directed by Engineer-in-Charge of following sizes : -
20 mm bore
25 mm bore
Material & labour for relaying of DI/CI pipe 250mm obtained from item No 5 here-in-before complete all as specified and diretcted by Engr-in-Charge.
Supply and laying ductile iron (DI) pressure pipes with spigot and socketed ends, class K-7 , ISI marked (IS 8329-2000), internally lined with cement mortar as per IS 8329-2000, externally coated with Zinc 130gsm and finishing layer of bitumen (70 microns) as per IS 8329-2000, jointing with and including rubber gasket joints; including fixing of fittings with and including suitable jointing material, complete all as specified and directed by Engineer-in-Charge of following sizes : - (Note-Supply only fittings like bends, tapers, etc. shall be measured and paid for separately under item No 15 here after)
300mm dia
250mm dia
200mm dia
150mm dia
100mm dia
Supply only DI fittings like bends (any type, radius and angle) tapers any type (straight /bend, increasing, decreasing or double socket etc) Tee pieces single branch 'Y' junction, double branch cross, collars, caps & plugs for size upto 300mm bore of DI pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MS connection clamp made out of MS flat iron 50x6mm complete with GI socket welded it on one FI strip suitably positioned at the centre of pipe complete with MS nuts, bolts, washers (02/04 Nos) and rubber packing for branch connection complete all as specified and directed by Engineer-in-Charge for following sizes of pipe :- (Note. Excavation and earth work shall be included in the quoted rate)
80mm dia
100mm dia
150mm dia
Material & labour for replacement of MS clamps ( including excavation and earth work) made out of MS sheet 3mm thick, cut to size and bent to shape to cover the 80 to 300mm dia DI/CI/GI pipe externally in two pieces of required length , with 2/4 holes as per site requirement for clamping bolts, nuts & washers , to cover the hole on DI/CI pipe, alongwith ruber gasket of size 6mm thick of required for arresting the leakages complete all as specified and directed by Engineer-in-Charge of following sizes : -
80mm dia
100mm dia
150mm dia
200mm dia
300mm dia
Material & labour for replacemnt of welding work of existing MS Pipe line,jointing,welding of pipe line incl if required material such as nuts ,bolts,washer ,rubber gasket kit and MS sheet as per existing size of pipe complete all as specified and directed by Engineer-in-Charge.
Material & labour for replacement of long radius MS bend heavy duty with suitable size flange,nuts ,bolts,washer,rubber gasket kit ,jointing,with existing pipe line/ motor pump including welding work complete all as specified and directed by Engineer-in-Charge for following sizes :-
80mm bore
100mm bore
150mm bore
Supply & fix in replacement of CI foot valve ISI marked with flanged ends including MS bolts, nuts and washers from UG Sump of any capacity complete all as specified and directed by Engineer-in-Charge for following sizes :-
80mm bore
100mm bore
150mm bore
200mm bore
Supply & fix in repalacement of Non Return Valve class PN 1.0 of undermentioned type and size with cast iron body and both ends flanged,IS-5312 marked complete with neoprene rubber gasket,jointing material and incl nuts/bolts/washer of suitable size complete all as specified and directed by Engineer-in-Charge for following sizes :-
80mm bore
100mm bore
150mm bore
Supply & fix in replacement of old unservicable gland packing with new to the sluice valve of any size complete with and including MS nuts/bolts/washer of suitable size etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for repairing cast iron sluice vlave flanged type of any make by dismantling the valve replacing the S/S spindle and Brass Check nut of suitable size as per site etc and resembling and refixing the same in position & testing and make good complete as specified and directed by Engineer-in-Charge for sluice valve of folliwing sizes:-
80mm dia
100mm dia
150mm dia
200mm dia
250mm dia
300mm dia
Supply & fix in replacement of old unservicable gland plate with new to the sluice valve of any size as per site requirement complete all as specified and directed by Engineer-in-Charge.
Supply & fix in replacement of cast iron sluice valves with flanged ends, class I PN 1.0, heavy duty, ISI marked, drilled type, non raising type, IS-14846 mark, including iron wheel, stainless steel spindle, complete with suitable rubber insertion 3mm thick at both ends with and including nuts, bolts and washers, fixed with and including suitable joints; fixing & jointing connected fittings like tapers,etc. including suitable jointing material complete as specified and directed by Engineer-in-Charge for sluice valve of folliwing sizes:-
80mm dia
100mm dia
150mm dia
200mm dia
250mm dia
Material & labour for preparing old painted surfaces of existing water supply/distribution installation equipments i.e. centrifugal pump sets including motor, electric panel board complete and applying double coat of spray painting of synthetic enamel paints 1st quality complete as specified and directed by Engineer-in-Charge for sluice valve of folliwing sizes:-
Temple view pump house (60 HP-04 No ,LT Panel-5)
Narmada pump house and filter plant (15 HP-03 No ,LT Panel-1)
Phase-III pump house (30 HP-02 No ,LT Panel-2)
Pechora pump house (20 HP-02 No ,LT Panel-2)
BP sump pump house (40 HP-02 No ,10 HP-01 Np,LT Panel-3)
308 TRU pump house (10 HP-04 No ,LT Panel-2)
Junction point pump house (60 HP-02 No ,40 HP-02 No ,LT Panel-5)
Petrol pump pump house (LT Panel-1)
Kukma pump house (LT Panel-1)
Dhorava pump house (LT Panel-1)
Ghada pump house (LT Panel-1)
Swimming Pool (12.5 HP-02 No ,LT Panel-1)
Temple view RO Plant (RO plant -02 No,LT Panel-1)
308 TRU RO Plant (RO plant -02 No,LT Panel-1)
Material & labour for cleaning of RCC over head tank (at staging of 17 to 21 mtr) from inside by taking out all deposits sludge/mud, scrapping from bottom, wall & top; washing thoroughly after cleaning with bleaching powder and making ready for use including writing of date of cleaning with white paint on black base for the complete as specified and directed by Engineer-in-Charge for sluice valve of folliwing capacities :- (Note:- Cost for dewatering the OHRs by opening gate of sluice valve to be taken in account while quoting the rates. No extra payment will made on this accoount.)
Material & labour for cleaning of UG sump from inside by taking out all deposits, sludge & mud; scrapping from bottom, wall & top; washing thoroughly after cleaning with bleaching powder and making ready for use including writing of date of cleaning with white paint on black base complete all as specified and directed by Engineer-in-Charge for the following capacities :-(Note:- Cost for taking out water from the UG sumps, whatever the quantity it may be by diesel engine pump & / or manually shall be taken in account while quoting the rates. No extra payment will made on this account.)
Supply & fix in replacement of PTMT Ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball and fly nut complete, screwed for iron/GI pipe or brass ferrule complete as specified and directed by Engineer-in-Charge for sluice valve of folliwing size :-
25 mm bore
20 mm bore
Supply & fix in replacement of bib taps,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of size 15 mm bore complete all as specified and directed by Engineer-in-charge
Supply & fix in replacement of bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed, screwed down, screwed for iron pipe of size 15 mm bore complete all as specified and directed by Engineer-in-Charge.
Supply & fix in replacement of cast iron air release valve (ARV) wirh single air outlet,conforming to IS 14845 of size 50 mm dia bore and fixing up in cast iron water supply mains of size 50mm dia complete all as specified and directed by Engineer-in-charge
Supply & fix in replacement of cast iron air release valve (ARV) wirh double air outlet,conforming to IS 14845 of size 50 mm dia bore and fixing up in cast iron water supply mains of size 50mm dia complete all as specified and directed by Engineer-in-charge
Supply & fix in replacement of cast iron air release valve (ARV) wirh double air outlet,conforming to IS 14845 of size 80 mm dia bore and fixing up in cast iron water supply mains of size 80mm dia complete all as specified and directed by Engineer-in-charge
Supply,fixing and testing and replacement of electronic chemical dosing (pump) unit electrically operated suitable for calcium hypo chlorite self primary dosing range 500 ML/Hr to 5000 ML/Hr complete all as specified and directed by Engineer-in-Charge.
Supply & fix in replacement of framed work 410-W (Gde E-250 ) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hingeswelding and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed by Engineer-in-charge
Material & labour for construction of valve chamber with MS sheet cover 3 mm thick with angle iron frame of size 50x50x6 mm, double door type and with locking arrangements including excavation and earth work in any type of soil, PCC (1:4:8) type D2 as in foundation, PCC benching 1:2:4 type B-1, PCC (1:5:8) block masonry 20 cm thick in cement mortar (1:6), 10 mm thick plastering in CM 1:4, PCC bed in (1:3:6), painting one coat of red oxide and two coats of bituminous black paint on all steel surfaces all as shown on drawing No. CEAA/TD/57, sheet 1/1 complete all as specified and directed by Engineer-in-Charge of followng size size 1050 mm x 750 mm x 1000 mm type C (internal dimensions). (Note:- Rate of above item shall include the cost of demolition of existing valve chamber). .
All as per item No 41 above but internal dimension 600mmx600mmx1000mm complete all as specified and directed by Engineer-in-charge
Supply & fix in replacement 5000 Litre capacity Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe including disconnecting & taking down the existing water tank complete all as specified and directed by Engineer-in-Charge.
Supply & fix cleaning of RO plant, cleaning of membrane with citric acid, testing of water flow rate, testing of all equipments,testing of water, reassembling the membrane in its original position, complete all as specified and directed by Engr-in-Charge. (Note:- Cleaning of RO plant will be carried out twice in every months and date of cleaning should be written in white letters on black back ground
Supply & fix in replacement cartridge filter of RO plant complete all as specified and directed by Engineer-in-charge
Supply & fix in replacement of leather sheet flap of CI foot valve of undermentioned type and size with necessary fixing arrangement like nut,bolt wahser packing sheet etc complete all as specified and directed by Engineer-in-Charge for the following size :-
80 mm dia
100 mm dia
150 mm dia
Material and Labour for replacement of mechanical long collar joint consisting made out of cast iron,, including MS nuts, bolts, rubber ring/gasket,cleaning the pipe surface, chamfering or cutting the edges of pipes for positioning, jointing and testing for the following size and of pipe material GI/ CI/ MS/ AC complete all as specified and directed by Engineer-in-Charge for the following size :-
300 mm bore
200 mm bore
150 mm bore
100 mm bore
80 mm bore
Material & labour for road cutting for laying of water pipe line including excavation, returning filling in spreading leveling, well ramming in layers complete all as specified and directed by Engineer-in-Charge. Note:- The rate quoted shall be in including the cost of making good of cutting road with PCC 1:4:8 and no extra payment will be admissible to contractor in this regard.
Demolition of cement concrete (un-reinforced) in any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.
Material & labour for plain cement concrete (1:3:6) type C-2 using 20mm graded course aggregate as in top gap filing of road/path/Foundation etc complete all as specified and directed by Engineer-in-charge
Material & labour for 100 mm thick PCC 1:3:6 type B-2 (using 40 mm graded aggregate ) as in floor, finishing cement concrete surface, spike rolling or making impression of expanded metal whilst the concrete in green complete all as specified and directed by Engineer-in-Charge.
Material & labour for cleaning of SWT of capacity 100000 Ltr of any description,dewatering complete water with the help of diesel pump/motor and the inner surface of wall of tank shall be cleaned with scrapping and cleaned with high pressure jet pump after empty the water in tank. (a) After throught cleaning of the tank ,the cleaning water, vegitation and sludge is to be removed by using pump, and sludge and vegitation has to be disposed off at a place as directed. (b) After made the tank dirty free, the inner surafce of the tank shall be kept dry for 24 hours to findout the deffects repair (c) The rate quoted shall be deemed to be is inclusive of cost of two coat of white wash on internal surfaces and exposed external surface (d) The rate quoted shall be deemed to be is inclusive of bleaching powder or any other cleaning agent to be used for tank cleaning .(f) After cleaning of SWT,SWT No SWT Capacity, date of cleaning and next due on should be written in white letters on black background complete all as specified and directed by Engineer-in-charge
All as per item No. 52 above but SWT of capacity 72000 Ltr complete all as specified and directed by Engineer-in-Charge.
All as per item No. 52 above but SWTof capacity 18000 Ltr complete all as specified and directed by Engineer-in-Charge.
Material & labour for opening and dismantling of Iron removal plant of capacity 1 Lakh Liter per hour (03 No Mild steel pressure vessel tank )installed at 308 TRU including opening of unservicable water pipe line and fitting and refixed at same position after demolition of old PCC and make new PCC of appropriate thickness required at site including refixing the same with new pipe and fittings complete all as specified and directed by Engineer-in-charge Note :-The Rate of minor welding work and scrapping the surface ,applying painting two coat over one coat of redoxide as directed by engr-in charge required at site is included in the quoted rate.The replacement of filter media of iron removal plant and pipe line shall be measured seperately under respective items.
Supply and filling multi grade filter media gravel of existing shape and size for iron removal vesseel in lot of 50 KG bags for filling into vessel including draining out the existing used multi grade filter media from FRP vessel and cleaning all around area and repacking the vessel after filling in new items complete by means of packing and fixing material including labour and testing for appropriate pressure including taking down old unserviceable complete all as specified and directed by Engr-in-charge
Supply and filling activated granular carbon (charcoal 900 IV) for iron removal plant vessel in lot of 25 KG bags for filling into vessel including draiing out the existing used Charcoal from FRP vessel and cleaning the around area and repacking the vessel after filling in new items complete by means of packing and fixing material including labour and testing for appropriate pressure including taking down old unserviceable complete all as specified and directed by Engr-in-charge
Supply and filling Iron removal filter for iron removal plant vesseel in lot of 25 KG bags for filling into vessel including draiing out the existing used Iron Removal filterl from FRP vessel and cleaning the around area and repacking the vessel after filling in new items complete by means of packing and fixing material including labour and testing for appropriate pressure including taking down old unserviceable complete all as specified and directed by Engr-in-charge.
upply and fix in replacement of digital water level indicator,display unit in red 7 segment LED display 4 digit of sumps and OH reservoirs(18 to 21 Mtr height) including replacemnt of sensor and other accessories complete all as specified and directed by Engineer-in-Charge.
SSupply and mixing calcium hypochlorite for water treatment following generic specification and specification complete all as specified and directed by Engineer-in-Charge:- Generic Specifications:- (a)Common name:- Stable Bleaching Powder/ High strength Bleaching Powder (b)Description/Apperance:-Dry free flowing and free from lupms (c)Toxic & Undesirable Substance :-Should not induce substance beyond accepeted limit as given in IS 10500(2012) in treated and disinfected. (d)Packing:- 20-25 Kg bags/40-45 kg Durms.Packing in drums is preferable to reduce fire hazard in places of high ambient temperature. Specification:- (a) Available Chlorine - 65 % (b) Stability-1/15Max (c) Particle size(passing through 1.70mm IS sieve-99.5 % (d) water insoluble matter-6% Max (e) Calcium Hydroxide-4% Max 9f) Sodium Chloride -15 % Max Note: Test Certificate each batch of chlorine to be submitted at the time of delivery.
M/s Bombay Novelty Stores (BID ID -3363877)
sudarshan builders (BID ID -3364492)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .