PROVISION OF TECHNICAL AND STORAGE ACCN AT AF STN NALIYA (R-2020) (2ND CALL)

Amount

NOTE: Schedule ‘A’ Part I to XII are under Ser No. 1.00 to 12.00. are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out by the contractor for Building / Structures as listed in Sch `A’ Part I.

Lump sum price worked out by the contractor for Excavation & Earthwork as listed in Sch `A’ Part II

Lump sum price worked out by the contractor for Internal water supply as listed in Sch `A’ Part III

Lump sum price worked out by the contractor for Internal Electrification as listed in Sch `A’ Part IV.

Lump sum price worked out by the contractor for Road/Path/Hardstanding and Culvert as listed in Sch `A’ Part V.

Lump sum price worked out by the contractor for Sewage disposal as listed in Sch `A’ Part VI.

Lump sum price worked out by the contractor for Area drainage as listed in Sch `A’ Part VII.

Lump sum price worked out by the contractor for Security Wall, Fencing & Gate as listed in Sch `A’ Part VIII.

Lump sum price worked out by the contractor for Fire Hydrant/ External Water Supply as listed in Sch `A’ Part IX.

Lump sum price worked out by the contractor for Lightening Protection as listed in Sch `A’ Part X.

Lump sum price worked out by the contractor for Electro Static Discharge System as listed in Sch `A’ Part XI.

Lump sum price worked out by the contractor for External Electrification as listed in Sch `A’ Part XII.

SCHEDULE `A' PART - XIII Fittings & fixtures is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signified this fact only. Bidder shall insert their rates in Green filed under Col-6.

INTERNAL ELECTRIFICATION

M & L for flame proof point wiring complete using colour code with two runs of 2.5 Sqmm single core multi-stranded copper conductor FRLS-H PVC insulated and unsheathed cable 1100 volts grade conforming to IS-694 & IS:732-1989 drawn through and including ERW steel conduit 25mm dia (external) flame proof, heavy grade (IS Marked) including necessary all accessories/fixtures concealed in wall, ceiling including sunken type pressed steel terminal boxes with flame retardant sheet of approved shade 3mm thick including providing continuous earth wire with one single run of 2.5 sqmm single core multistranded copper conductor FRLS-H, PVC insulated and unsheathed cable 1100 volts grade conforming to IS-694 complete all as specified and as directed for following :-

(a) One light point controlled by one, one way switch.

S & F flame proof switch rotary type with termination box LM6,16A, single pole 250V complete all as specified & directed. Make- Shyaam Switchgears Cat Part No SSPL/RI/1010 or equivalent Cat No of make as specified in Appx 'B' to Particular specifications as approved by GE.

S & F fluorescent tube light fitting, 1x36 W flame proof type FLP-WP made of aluminium alloy LM-6 with electronic ballast ,bipin holders, connector block , including lamp etc. complete with all accessories prewired and including connecting up with copper conductor cable with suitable size all as specified and as directed. Make- Shyaam Switchgears Cat Part No SSPL/FF/1271 or equivalent Cat No of make as specified in Appx 'B' to Particular specifications as approved by GE.

S & F Bulk Head CFL light fitting flame proof type FLP-WP of 1x26 W built in control gear box made of alluminium alloy LM-6 with electronic ballast ,bipin holders, connector block ,etc. complete with all accessories prewired and including connecting up with copper conductor cable with suitable size all as specified and as directed. Make- Shyaam Switchgears Cat Part No SSPL/BH/184 or equivalent Cat No of make as specified in Appx 'B' to Particular specifications as approved by GE.

S & F flame proof weather proof control panel in cast alluminium alloy LM6 construction Shyaam Switchgears Cat Part No SSPL/MCDB/186 equivalent Cat No of make as specified in Appx 'B' to Particular specifications as approved by GE duly Certified by CMRI Dhanbad for Group IIA & IIB to IS :2148 Comprising with following :- Incoming :- 1 No of 40 A MCB SPN Out going:- 4 Nos of 10 A SP MCB & 02 Nos 06 Amp SP MCB. including cost of cable gland & stopping plug all as specified and directed.

S & F LED batten single tube 1 x 20 W 230V, 6000K Rated CCT energy efficient with atomic ballast bipin holders starter blocks , diffusers etc complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed. .Make; Orient electric Cat no LRT8-20-C or equivalent Cat No of make as specified in Appx 'B' to Particular specifications as approved by GE.

S&F Street light luminaire LED 22 W 5000K with aesthetically designed sheet aluminium housing and UV stabilised acrylic cover complete with lamp and internal connection including bracket of size 40 mm dia GI light grade tubing including clamps, nuts and bolts etc all as specified & as directed. Make; Orient electric Cat no LSFS-022-C or equivalent Cat No of make as specified in Appx 'B' to Particular specifications as approved by GE. (for internal electrification and external electrification, 26 Nos and 154 Nos respectively)

S & F ceiling fan of 1200 mm sweep, 5 star complete with blades, down rod conopy etc including hanging in position and conneting with 3 core, 0.50 Sqmm copper PVC insulated and PVC sheathed round cable from ceiling rose to fan complete all as specified and as directed

Supply and fix exhaust fan 300 mm sweep AC, 240 volts, metal body fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable etc all as specified and as directed. Make Havells cat No Ventil Air - DS or equivalent cat No of make as specified in Appendix 'B' to particular specifications as approved by GE.

Supply and fix exhaust fan 450 mm sweep AC, 240 volts, metal body fixed as per manufacturer's instructions, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable etc all as specified and as directed. Make Havells cat No Ventil Air - DS or equivalent cat No of make as specified in Appendix 'B' to particular specifications as approved by GE.

S&F LED Lamp fitting with holder of capacity of 5 W LED LAMP B 22 WHITE with all accessories fixed on walls or on ceiling, on round block of size 80 mm dia and 40 mm depth open recessed type (2 Nos) and connecting up complete with 23/0.0076 (or equivalent size in mm) flexible three core twisted copper cable all as specified and as directed. Make: C & S Cat No LTHPLEDLAMP5W/B22 or equivalent Cat No of make as specified in Appx 'B' to Particular specifications as approved by GE.

M&L for MCB triple pole & neutral 415 volt C curve 10 KA, 63 Amps capacity IP 20 complete all as specified and as directed

M&L for MCB Single pole & neutral 415 volt C curve 10 KA, 32 to 40 Amps capacity IP 20 complete all as specified and as directed.

M&L for MCB single pole, 5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and as directed.

ROAD/PATH/HARD STANDING AND CULVERT

M&L for approved GSB filling 200mm thick as in pavings in layers not exceeding 15cm including spreading watering, rolling and compacted / consolidated to required gradient and camber as per MORTH specifications complete all as specified and as directed.

M&L for 150mm thick compacted thickness WMM (wet mix macadam) with crushed stone aggregate, spread rolled and consolidated to required gradient, camber & shape all as specified and as directed.

M&L for 400 micron polythene film below PQC complete all as specified and directed.

M&L for 100mm thick PCC as in Dry Lean Concrete, M-15 using crushed stone aggregate as in mass concrete etc complete all as specified and as directed.

M&L 220mm thick PQC as in pavements /hardstandings of min flexural strength 45Kg/Sqcm (minimum cement content 400 kg/Cum or as per design mix which ever is higher using non circular fibres @ 1 Kg per cum of concrete) etc complete all as specified and as directed.

M&L for forming 20mm thick expansion joint filled with fillar board HD-100, provision of closed cell polyurethene back up rod 25mm dia and sealed with pitch free polyurethene grey sealant (minimum depth of sealant above back up rod shall be 20mm) confirming to BS 5212 type FB priming the sides as recommended in manufacturer's instructions and applying masking tape on edges of joint to prevent accidental spillage of sealant and removing the masking tape after sealant applied. The sealant should have MAF (+/-) 30% and manufacturer's warranty of 10 years as used in international Airport in India all as specified and as directed.

M&L for forming contraction (Dummy) joints 100mm deep x 8mm wide (using diamond cutter) as soon as the concrete is strong enough to withstand edge spalling i.e. first cut as early as possible but not later than 24Hrs and filled with expanded polyurethene foam (armoured board) applying bond breaker tape on top of armour board for completed width of joint including provision of closed cell polyurethene back up rod 10mm dia and sealed with pitch free pollyurethene grey sealant (minimum depth of sealant above back up rod shall be 10mm) confirming to BS 5212 type FB priming the sides as recommended in manufacturer's instructions and applying masking tape on edges of joint to prevent accidental spillage of sealant and removing the masking tape after sealant applied. The sealant should have MAF (+/-) 30% and manufacturer's warranty of 10 years as used in international Airport in India all as specified and as directed.

M&L for forming construction joints 25mm deep x 8mm wide (using diamond cutter) and sealed with pitch free polyurethene sealant confirming to BS-5212 type FB, priming the sides including provision of closed cell polyurethene back up rod 12mm dia and and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surface and to give a neat finish to the sealant and removing the masking tape after sealant applied. The sealant should have MAF (+/-) 30% and manufacturer's warranty of 10 years as used in international Airport in India all as specified and as directed.

EOT CRANE

Design, manufacturing, supply, commissioning and testing of 2.0 Ton capacity, 9.5mtr Span, 36mtr bay length, 3.5 mtr hook lift pendent operated type flameproof double girder indoor EOT Crane with Granty Girder for Non AC shed, Class-II (medium duty) as per IS-3177, IS-807 suitable for Gas Group IIA, IIB, Floor operated through independent pendent push button station, Hoist 4.0mpm, CT 10 mpm, LT 15 mpm, Motor HP-BPL/Crompton Greaves, Sq cage motors as per IS 325, Hoisting-3.0 HP Sq cage, CT-0.5HP-Sq cage, LT-1.0 HP-Sq cage-2 Nos, wire rope-dia 8mm-4 fall, fiber core, usha martin make. 'C' type Hook forged seel conf to IS 3815, Flame proof brakes, Flame proof limit switches, for all motions (Hoisting CT & LT motion), CT cabling 'C' track type, Crane wt approx 7.2 Ton, LT heel load 3.5 Ton (approx), Full length platform to be provided on one side of main grider of crane, Double flanged 'L' type of dia 200mm-4 Nos LT wheels, double flanged 'L' type of dia 160 mm - 4 Nos, ISMB-300 (considering column to distance 6 mtr of gantry grider size, LT rail size - 40x40mm bright bar, operated power 415V, 50 Hz, 3 phase AC alongwith control voltage 110V, DSL-'I' Track type all as directed. Note : (i) Contractor to verify actual dimention for span at site before placement of procurement order. (ii) GA drawing shall be approved by GE before placement of procurement order.

SECURITY WALL, FENCING AND GATE

Supply and fix galvanised steel punched tape concertina coil of 1050mm dia (dia of coil with unstretched) and fixed to angle iron with 3.15mm dia GI wire all as specified and as directed.

ELECTRO STATIC DISCHARGE SYSTEM

Supply and fix standard Electro Static Discharge Station (ESD) and connection box for connecting between conductor and Resistor etc complete all as specified and as directed.

Supply and fix Resistor box made out of plastic with transparent cover & containing 2 Nos of 500 KΩ resistor in parallel and mounted on isolator and resistor box fixed on the wall, 30cm above the ground and connecting ESD with copper wire 10M2 (Approx - 10 metre) clamp for fixing at ESD etc complete all as specified and as directed.

EXTERNAL ELECTRIFICATION

Supply and fix FRP juction box of size outside dimensions 390 x 225 x 140 mm of make sintex, Cat No GSJB-3923 or equivalent as approved by the GE including connector suitable for 63 Amps with and including MCB SP C series 6 Amps - 01 No and fixing on pole with and including MS clamps made out of 25 x 3mm MS flat iron, nut, bolts etc. complete.

Supply & fix Flame proof LED light-High Lumen output fitting of 39/40 Watt with exclusive innovative designed, long life versatile pressure die cast aluminium IP65 flood light luminaire with high power LED as light source complete all as specified and directed by Engineer-in-Charge. (Make - Sudhir cat No FL/2C/1251-39w lamp voltage or equivalent of Shyam / Balinga / Bajaj) For in between IGLOO (1,2,3,4,12) & IGLOO (AC1,AC2,11,10)

Supply, install, testing and commissioning of Diesel Engine driven generating set 160 KVA, 3 Phase, 4 wire, 415 Volts, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integral acoustic enclosure having silent features such as modular bolted construction with fabrication on imported CNC torret punch machines, nine tank treatment process with pure polyster based powder coating to ensure long life in all weather conditions and for out door application/ installation, integrated design there by facilitating / easy handling installation & shifting of the equipment at site. The design of integral acoustic enclosure should be any type approved by national Physical laboratory as per Central Pollution Control Board (CPCB-II) latest norms/ regulation with fuel tank, battery and standard accessories, acoustic enclosure, vibration pad, tools and spare,as provided by manufacturer, PCC foundation as per OEM all as specified and as directed with the following specifications :-

(A) ENGINE - Engine shal be Water cooled diesel engine of suitable capacity to match the 160 KVA, alternator under NTP conditions with provision of 10% over load for 1 hour in every 12 hours running confirming to BS-5514. The engine shall consist of following :- (i) Fly wheel (ii) Close couping (iii) Cooling fan (iv) Radiator with guard and water pump engine mounted (v) Battery charging alternator (vi) Air cleaner heavy duty dry type (vii) Fuel injection pump (FIP) (viii) Radiator fan (blower type) with guard (ix) Precision governor (x) Fuel filter (xi) Lubricating oil filters (mounted) (xii) 12 V self regulating alternator belt driven by engine (xiii) Exhaust silencer heavy duty residential type (xiv) Corrosion resister / scale inhabitor (xv) Starter 12 V DC (xvi) Lubricating oil cooler (xvii) Lubricating oil pump (gear type) (xviii) Exhaust piping as per manufacturer design.*

(B) Control Panel : The Control Panel shall be manufactured with 14/16 guage CRCA sheet duly powder coated for a weather - proof and long lasting finish. The Control Panel shall consist the following parts :- (i) PSO500 Controller - Aluminium Bas Bars with suitable capacity with in / outgoing terminals - Indicating Lamps for "Load On" and "Set Running" - MCCB of suitable rating with overload and short circuit protections. (iii) PS 0500 : Genset Controller :- Control microprocessor based generator set monitoring and control system. The control shall provide a simple operator interface to the gererator set, manual and remote start / stop control, shutdown fault indication and an LCD hour counter. The integration of all function into a single control system provides enhanced reliability performance compared to conventional generater set control system. The control shall be designed and tested to meet harsh environment in which gensets are typically applied.

(d) Controller provide configurable time delay of 0-30 sec to start after remote start signal and time delay of 0-60 secs prior to shutdown after stop signal. (e) Sleep mode increase battery life. Configurable current setting from low to minimize current draw when genset is not working. (viii) Enigne Protective Functions includes :- (a) High engine water tempreature warning/shutdown (b) Low coolant temp warning (c) Sensor failure indication (d) Low and high battery voltage warning (e) Weak battery warning (f) Fail to start shut down (g) Cranking lockout : Control will not allow the starter to engage or to crank the running engine (h) Cyclic cranking : Configurable for the number of starting cycle (1 to 7) and duration of crank and rest periods.

(C) BRUSHLESS ALTERNATOR :- (i) Alternator coupled to engine through a flexible coupling to an indigenous alternator mounted on strong steel fabricated base frame suitable for mounting on a permanent foundation. Brush less alternator shall be confirming to BS-5000 or relevant of IS-4722. (ii) Type :- Self excited self regulated with automatic voltage regulator (iii) Rating :- 160 KVA at 0.8 PF lagging 4 pole horizontal at NTP condition (iv) Speed - 1500 RPM (v) System -415 V - 2.5% AC 3 phase 4 wire 50 Hz (vi) Connection - 4 wire star connection (vii) Enclosure - Screen projected drip proof (viii) Ventilation - Self ventilated (ix) Insulation - Insulation, Class H, IP-23

Material & Labour for street light brackets made of 40 mm dia G.I. Pipe light grade in shape and angle as directed not exceeding 1.5 mtrs in length fixed to pole with suitable size of M.S. clamps made of M.S flat of size 40 mm x 3 mm, 2 Nos, M.S nut & bolt with cup washers complete all as specified and as directed.

Supply and Lay Insulating Polymat ISI marked for 11/12 kV Installations in substations as per OEM specifications complete all as specified and as directed.

S & F LED street light minimum of 40 W IP 65 protected, Powder coated pressure die cast aluminium High Power LED Street light with heat resistant toughened glass, complete all as specified and as directed. Make: Havels, Model ENDURAPEARLNEOSL40W LED757PASYTOPC HSN Code-9405 or its equivalent in Philips/ CG / BAJAJ

Supply, testing and commissioning of HT 11 KV, indoor type, 3 phase, 50 cycles totally enclosed metal clad VCB switchgear having Rupturing capacity upto 750 MVA, overload and earth fault protection, ammeter, voltmeter and of rating 630 Amp. (a) Housing for circuit breaker carriage-01 (b) Mechanical inter lock and automatic safety shutter gear including pad locking arrangement-01 (c) Isolating plugs-06 (d) 01 No 11 KV, 630 Amps, VCB panel board having 02 incoming VCB & 01 outgoing VCB on common bus bar comprising of :- (e) Assembly of 3 VCB interrupters complete with epoxy support insulator and self aligning finger type isolating contacts. (f) Hand and motor (220 volt AC) charged independent spring closing. Tripping trip free operating mechanism with manual closing and tripping push buttons and mechanical breaker closed/open spring charged/discharged indication. (g) Electrical release coil 24BV DC-01 No (h) Mechanical operation counter. (i) Breaker operated auxiliary switch-03 Nos (j) Bus bar chamber including a set of 3 phase 630 Amp copper bus bar-01 No (k) 230 volts AC single phase 80W rated strip type heater-02 Nos with indicator complete.

Lightning Protection

Supply & fix GI pipe 40mm dia, 1.5 RM long medium grade vertically fixed by means of PCC 1:2:4 of size 1x1x0.5 Cubic Feet for mounting of Copper air termination rod all as directed.

Fire Hydrant / External Water Supply / Bore Well

Material & Labour Air release valves with two air out lets,conforming to IS-14845 of size 150 mm dia bore and fixing up in DI water supply mains.

M & L Ductile iron pipes 150 mm bore dia with flanged ends,vertically cast,class k-9,in any length laid in trenches.

S&F MS pipe of 400mm bore with flanged ends, 7mm thick for header along with form work as per direction given by EIC.

M & L for DI Bend ,Tapers,Tee pieces (single, double branch ) any type and angle /radius and straight connecting pieces for bore upto 150mm but all ends flanged.

M & L for DI Bend, Tapers, Tee pieces (singe, double branch ) any length and angle/radius and traight connecting pieces for bore of size 200mm to 300 mm (4”) dia pipe.

Supply and Fix PVC insulated 4 core 16 sq mm Copper multi stranded PVC sheathed submersible cable ISI marked and confotming to IS 694 and connecting to submersible pump and to LT panel and all as specified and directed.

S & F three phase fully automatic star delta starter of 45-75 Amps capacity for centrifugal pumps motor working voltage 415 volts .Make :Seimens,Schneider /Andrew yule/ABB ,model No: ML-4

M & L Costruction of valve chamber of size (1050 x 750 x 1000mm ) in PCC 1:3:6 masonry built in CM(1:4) with MS covers 3 mm thick and 50 x 50 x 6 mm locking arrangement including excavaton and earth works PCC (1;4;8) type D2 for foundation PCC bed/coping in cement concrete (1:2:4) type B1 plastering 15 mm thick with Cm 1:4 painting with one coat of bituminous black paint over a coat of red oxide primer on all steel surface all as shown in Drgt No CEAA/TD/57 sheet 1/1 dt 28.05.92 for "D" all as specifiedd and directed by Engr-In-Charge.

Supply, installation & commisioning Submersible pump of 35 WHP capacity, electric driven 415V TP suitable for 250mm dia bore (casing pipe size 300/350mm) Head 70-80 mtr at 520 to 565 LPM discharge, coulmn pipe size 65mm bore, bronze impeller, High graded cast iron pump bowl, stainless steel motor casing, stainless steel pump shaft & motor shaft incl electric cable connection with pump starter all as specified and as directed by EIC.

Supply and Fix PVC insulated 3 core 16 sq mm Copper multi stranded PVC sheathed submersible cable ISI marked and confotming to IS 694 and connecting to submersible pump and to LT panel after taking out old unserviceable cable all as specified and directed.

Supply and Fix Pipe Ductile iron, S/S including specials class K-9 supplied and laid complete 100mm dia.

Yeild Test for borewell by continous pumping 16Hrs including all equipments labour.

Supply and Install Jockey pump horizontal end suction centrifugal type conforming to IS-12469 1988 with CI casing,bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with non over loading power characteristics for frequent start /stop operations for 440 volts ,3 phase ,50 Hz 90 m head, not less than 500 LPM water discharge.

S&F branch pipe and nozzle for 20 mm dia hose reel confirming to IS8090.

S&F 63 mm dia 15mtr long hose reel confirming to IS636 complete with male and female coupling confirming to IS903 all as specified by EIC.

RAMDEV CONSTRUCTION CO.

SOOD ASSOCIATES PVT LTD

M/s Gujarat Construction Company

Komal Buildcon Pvt. Ltd.