MANNING AND OPERATION FOR OPERATION AND MAINTENANCE OF HT/LT SUB STN AT COMMAND MESS SUB STN AND DG SET, CT POOL SUB STN, DRONA SUB STN, CANTEEN SUB STN, NAVAL BAND SUB STN AND CERTAIN WORKS UNDER AGE E/M- I OF GE (U- I) VISAKHAPATNAM

Amount

Manning and operation to the operation & maintenance of Command Mess HT/LT Electrical Sub Station & DG Sets, round the clock in 3 shifts of 8 hrs of each for the smooth and trouble free operation of Sub Station consists of the following equipments/ plants all as directed by Engineer - In - charge.

(i) One skilled electrician in each shift Note : (i) Bidder has to quote the following mandatory provisions related to wages and misc benefits for workmen which includes all Taxes, cess, levis as applicable including GST. (ii) In case the rates quoted are less than the prevailing rates / instructions under any heading(s), the bid will be treated as non-bonafide / invalid which shall be disqualified and such bids will not be considered for acceptance (iii) Payment for item nos. 1.00 (i) (a) to (f) will be done after submission of valid & authentic documents in support of proof of payment as mentioned in tender documents.

(a) Wage.

(b) Employer's Contribution towards Employees Provident Fund (EPF) .

(c) Employer's Contribution towards Employees State Insurance Corporation (ESIC ).

(d) Bonus in terms of "The Code on Wages-2019"

(e) Labour Welfare Cess (LWC) on Sl item no. 1.00 (i) (a) to (d) .

(f) Overhead and profit on Sl item no. 1.00 (i) (a) to (e) . [Quotations with ‘Nil’ or ‘Zero’ consideration (overhead and profit) shall be considered as “non bonafide bid”].

(ii) One semi skilled electrician in each shift Note : (i) Bidder has to quote the following mandatory provisions related to wages and misc benefits for workmen which includes all Taxes, cess, levis as applicable including GST. (ii) In case the rates quoted are less than the prevailing rates / instructions under any heading(s), the bid will be treated as non-bonafide / invalid which shall be disqualified and such bids will not be considered for acceptance (iii) Payment for item nos. 1.00 (ii) (a) to (f) will be done after submission of valid & authentic documents in support of proof of payment as mentioned in tender documents.

(a) Wage.

(b) Employer's Contribution towards Employees Provident Fund (EPF) .

(c) Employer's Contribution towards Employees State Insurance Corporation (ESIC ).

(d) Bonus in terms of "The Code on Wages-2019"

(e) Labour Welfare Cess (LWC) on Sl item no. 1.00 (ii) (a) to (d) .

(f) Overhead and profit on Sl item no. 1.00 (ii) (a) to (e) . [Quotations with ‘Nil’ or ‘Zero’ consideration (overhead and profit) shall be considered as “non bonafide bid”].

List of plants to be operated are as under (COMMAND MESS SUB STN) (a) Sub station building (b) Transformer 11KV/ 433V - 6 Nos (Out door) (c) VCB panels - 6 Nos (Indoor) (d) LT Panels - 3 Nos (Indoor) (e) LT Panels - 3 Nos (Outdoor) (f) DG Set - 125 KVA - 01 No (g) DG Set - 62.5 KVA - 01 No (h) HT 11 KV RMU - 1 No.

List of plants to be operated are as under (CANTEEN SUB STN) (a) Transformer 11KV/ 433V - 2 Nos (Out door) (b) LT Panel - 3 Nos. (c) HT 11 KV RMU - 1 No.

List of plants to be operated are as under (DRONA SUB STN) (a) Transformer 11KV/ 433V - 2 Nos (Out door). (b) LT Panel - 1No. (c) HT 11 KV RMU - 1 No.

Out sourcing to the operation & maintenance of CT Pool Sub Stn & Naval Band Sub Stn HT/LT Electrical Sub Station & DG Sets, round the clock in 3 shifts of 8 hrs of each for the smooth and trouble free operation of Sub Station consists of the following equipments/ plants all as directed by Engineer - In - charge.

(i) One skilled electrician in each shift Note : (i) Bidder has to quote the following mandatory provisions related to wages and misc benefits for workmen which includes all Taxes, cess, levis as applicable including GST. (ii) In case the rates quoted are less than the prevailing rates / instructions under any heading(s), the bid will be treated as non-bonafide / invalid which shall be disqualified and such bids will not be considered for acceptance (iii) Payment for item nos. 2.00 (i) (a) to (f) will be done after submission of valid & authentic documents in support of proof of payment as mentioned in tender documents.

(a) Wage.

(b) Employer's Contribution towards Employees Provident Fund (EPF) .

(c) Employer's Contribution towards Employees State Insurance Corporation (ESIC ).

(d) Bonus in terms of "The Code on Wages-2019"

(e) Labour Welfare Cess (LWC) on Sl item no. 2.00 (i) (a) to (d) .

(f) Overhead and profit on Sl item no. 2.00 (i) (a) to (e) . [Quotations with ‘Nil’ or ‘Zero’ consideration (overhead and profit) shall be considered as “non bonafide bid”].

(ii) One semi skilled electrician in each shift Note : (i) Bidder has to quote the following mandatory provisions related to wages and misc benefits for workmen which includes all Taxes, cess, levis as applicable including GST. (ii) In case the rates quoted are less than the prevailing rates / instructions under any heading(s), the bid will be treated as non-bonafide / invalid which shall be disqualified and such bids will not be considered for acceptance (iii) Payment for item nos. 2.00 (ii) (a) to (f) will be done after submission of valid & authentic documents in support of proof of payment as mentioned in tender documents.

(a) Wage.

(b) Employer's Contribution towards Employees Provident Fund (EPF) .

(c) Employer's Contribution towards Employees State Insurance Corporation (ESIC ).

(d) Bonus in terms of "The Code on Wages-2019"

(e) Labour Welfare Cess (LWC) on Sl item no. 2.00 (ii) (a) to (d) .

(f) Overhead and profit on Sl item no. 2.00 (ii) (a) to (e) . [Quotations with ‘Nil’ or ‘Zero’ consideration (overhead and profit) shall be considered as “non bonafide bid”].

List of plants to be operated are as under (CT POOL SUB STN) (a) Transformer 11KV/ 433V - 3 Nos (Out door). (b) LT Panels - 2 Nos (Indoor) (c) HT 11 KV RMU - 2 No. (d) DG Set - 82.5 KVA - 01 No

List of plants to be operated are as under (NAVAL SUB STN) (a) Transformer 11KV/ 433V - 2 Nos (Out door). (b) LT Panel Boards - 3 Nos. (c) HT 11 KV RMU - 1 No.

Note for item Sl No 01 to 02:

(i) The contractor is fully responsible for the smooth and trouble free operation for the installation.

(ii) General maintenance of like greasing of breaker, applying petroleum jelly to the contact parts and cleaning of HT Panels, Transformer and LT Panels etc.

(iii) The contractor is reponsible for the cleaning of indoor plant/machine room under this out sourcing

(iv) In case any problem occurs which seems not under the control of operator, the same shall be immediately intimated to JE concerned of this area or AGE E/M.

(v) The operator on duty shall be in uniform as directed by Engineer-in-charge / GE.

(vi) Battery charging and conditioning supply of distilled water including minor consumables to the Gen Set

(vii) (a) HSD oil required for running DG Set will be issued under Schedule ‘B’ free for filling which will be made available at site by Department. (b) It is the contractor’s responsibility to maintain the minimum reserve of oil in tank at any time and as directed by EIC. (c) Necessary Men power required to load the HSD oil at Store yard and to unload the HSD Oil at site shall be arranged by contractor and the rate quoted shall include for the same.

(viii) Petty repairs for panels, transformer shall be done by contractor and the rate shall be deemed to be included in quoted rate by the contractor.

M&L for detecting HT/LT UG cable faults located in any stretch / depth with cable fault locator consisting of microprocessor based, identification instrument, cable tracer for exact location of under ground cable routes. Notes:- The rate quoted deemed to be inclusive of rental charges for T&P like entire cable fault locating instrument, charges for operator and transportation etc complete.

M& L for heat shrinkable straight through joint for LT UG cable including jointing kits complete for making joints suitable for aluminium conducter cable of size 3.5 core 50/70/95 sq mm complete all as specified and directed. Make: Birla 3M/ Raychem/ Denson

M& L for heat shrinkable straight through joint for LT UG cable including jointing kits complete for making joints suitable for aluminium conducter cable of size 3.5 core 120/150 sq mm complete all as specified and directed. Make: Birla 3M/ Raychem/ Denson

M& L for heat shrinkable straight through joint for LT UG cable including jointing kits complete for making joints suitable for aluminium conducter cable of size 3.5 core 185/240 sq mm complete all as specified and directed. Make: Birla 3M/ Raychem/ Denson

Supply and laying or fixing or passing through pipe or in cable ducts, 11000 volts grade XLPE(FRLS) insulated Heavy duty (earthed),screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 185 sq mm 3 core size including takingdown old one complete all as specified and directed by Engineer-in-Charge. MAKE: Havells / Gloster / KEI Industries Ltd / Polycab / Asian Cables / Finolex

Supply and laying or fixing or passing through pipe or in cable ducts, 11000 volts grade XLPE(FRLS) insulated Heavy duty (earthed),screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 240 sq mm 3 core size including takingdown old one complete all as specified and directed by Engineer-in-Charge. MAKE: Havells / Gloster / KEI Industries Ltd / Polycab / Asian Cables / Finolex

Supply and fix cable jointing kit for 11 KV grade cable for outdoor terimination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conducter cable of size 240 sq mm. Make: Birla 3M/ Raychem/ Denson

Supply and fix cable jointing kit for 11 KV grade cable for indoor terimination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conducter cable of size 240 sq mm. Make: Birla 3M/ Raychem/ Denson

Supply and fix cable jointing kit for 11 KV grade cable for outdoor terimination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conducter cable of size 185 sq mm. Make: Birla 3M/ Raychem/ Denson

Supply and fix cable jointing kit for 11 KV grade cable for straight through outdoor heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conducter cable of size 185 sq mm. Make: Birla 3M/ Raychem/ Denson

Supply and fix cable jointing kit for 11 KV grade cable for indoor terimination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conducter cable of size 185 sq mm. Make: Birla 3M/ Raychem/ Denson

Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m depth and getting out in soft / loose soil complete all as specified and directed.

Removal of surplus excavated material of any type to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5 m bove the starting point complete all as specified and directed.

Returning and filling in of excavated material any type including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

M&L for sand cushioning / sand covering for underground cable protection complete all as specified. Note: Punned thickness shall only be measured and paid.

Supply and laying precast concrete cable covers class HV type 1 flat size 300 x 180 x 40 mm laid along alignment of cable as protection to cable in trenches complete all as specified and directed

Supply and fix or laid in road crossing/ fixed to poles, GI Pipe of 80 mm size light grade for protection of cable complete all as directed. Make : Tata/ Jindal

Making trench through horizontal earth Boaring for road/ foot path /hard standing/culvert etc for inserting GI protection pipe for drawing of cable and complete all as directed.

Supply and fix rubber mat of 1mtr X 2 mtr X 19 mm thick complete all as directed

Supply and replace MCCB 4 pole, 415 V, adjustable type 630Amps with breaking capacity 50 KA including necessary modification in the panel complete all as specified and as directed. make: GE/L&T/Havells/Indoasian

Supply and replace MCCB 4 pole, 415 V, adjustable type 400Amps with breaking capacity 35 KA including necessary modification in the panel complete all as specified and as directed. make: GE/L&T/Havells/Indoasian/Legrand

Supply and replace MCCB 4 pole, 415 V, adjustable type 250 Amps with breaking capacity 35 KA including necessary modification in the panel complete all as specified and as directed. make: GE/L&T/Havells/Indoasian/Legrand

Supply and replace MCCB 4 pole, 415 V, adjustable type 200 Amps with breaking capacity 35 KA including necessary modification in the panel complete all as specified and as directed. make: GE/L&T/Havells/Indoasian/Legrand

M/S CHANDRA ENGINEERS AND CONTRACTORS

MVV Prasad

MONITOR ENGINEERING WORKS

SRI SRK ENGINEERS

TECHNO SOFT SOLUTIONS

Sai Srija Constructions

SRIESWARI ENTERPRISES

M/s Saptagiri constructions

Sri Surya Enterprises