Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹8.1 L
EMD Value
₹20,295
Closing Date
22 Oct 2026, 5:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Deputy Director
O/o The Deputy Director Periyar Tiger Reserve West Division, Peermade 685531
Re tender for the cost of extension and upgradation of Puthussery Antipoching campshed in Mukkuzhy FS under Pampa Range during 2026-27.
2026_FD_874191_2
A3-1583/26
Open Tender
Civil Works - Buildings
Percentage
60 days
Pampa Range
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,015
Yes
₹20,295
Yes
14 Oct 2026
14 Oct 2026
24 Oct 2026
14 Oct 2026
22 Oct 2026
14 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)
including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5
m, as directed by Engineer-in-charge.All kinds of soil | 2.42 | cum | 257.63 | ₹623.46 |
| 2 | Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size derived from natural sources) | 0.32 | cum | 9,963.93 | ₹3,188.46 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4
coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm
nominal size derived from natural sources) | 0.92 | cum | 7,932.89 | ₹7,306.19 |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.Hot finished welded type tubes | 257.41 | Kg | 194.27 | ₹50,007.82 |
| 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required. | 31.57 | Sqm | 727.04 | ₹22,952.65 |
| 6 | Providing and fixing 15cm wide, 45 cm overall PVC (Polyvinyl Chloride) gutter with
brackets, bolts, nuts and washers etc., including making necessary connections with
rain water pipes complete. | 4.2 | Mtr | 348.28 | ₹1,462.78 |
| 7 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink without drain board470x420 mm bowl depth 178 mm | 1 | Each | 3,682.36 | ₹3,682.36 |
| 8 | Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal
bore, 165 mm long, weighing not less than 110 gms | 1 | Each | 196.45 | ₹196.45 |
| 9 | Providing and fixing PTMT stop cock of approved quality and colour.20 mm nominal
bore, 89 mm long, weighing not less than 88 gms | 1 | Each | 142.76 | ₹142.76 |
| 10 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm
dia 10 Kgf/cm2- Internal work - Exposed on wall | 6 | Mtr | 273.26 | ₹1,639.56 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.26 MB
Tendernotice_2.pdf
PDF • 1.16 MB
Tendernotice_3.pdf
PDF • 0.14 MB
Tendernotice_4.pdf
PDF • 0.34 MB
BOQ_1494777.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .