Renovation, Repairing of HT/LT line by covnversion of S/disc into D/disc, errection of mid span pole, stay set in the villages of Sorag project of UREDA under Capital S.I (C.M. Ghosna) in Kapkote Block under EDD, Bageshwar.

Amount

NON CENTRILIZED ITEM

B-TRANSMISSION

Holding Clamp for SP-23 Pole with N&B

Stay Clamp S/ended for SP-23 Pole with N&B

Stay Clamp D/ended for SP-23 Pole with N&B

Breasing Clamp Top for SP-23 Pole with N&B

Breasing Clamp Bottom for SP-23 pole with N&B

Earth Wire Clamp for SP-23 with N&B

C-TRANSFORMATION

Holding clamp for SP-23 Pole with N&B

TPMO Handle Holding Clamp for SP-23 Pole with N&B

Breasing Clamp Bottom for SP-23 pole with N&B

11 Kv Fuse Set

MS Clamp 25X3 mm with N&B

Lugs Aluminium 70 Sqmm

D-DISTRIBUTION

LT Shackle Insulator 100x115 mm with N&B

LT Shackle Insulator Clamp for SP-10 Pole with N&B

LT Shackle Insulator Clamp for SP-21 Pole with N&B

LT Stay Insulator

LT Stay Clamp for SP-10 Pole with N&B

LT Stay Clamp for SP-21 Pole with N&B

Earth Wire Clamp for SP-10 Pole with N&B

Earth Wire Clamp for SP-21 Pole with N&B

LT Bolted type Spacer 4 Wire

LT Bolted type Spacer 3 Wire

LABOUR CHARGE

B-TRANSMISSION

Cartage of ST Pole from store centre Almora to construction site with loading, unloading at both points and proper stacking in average distance 160 Km.

ST Pole 8.5 mtr SP-23

Cartage of other material (other than poles) by vehicle from store centre Almora to nearest construction site store including loading & unloading at both ends.

Head load cartage of following Poles from road to construction site upto 1.0 to 6.0 Km.

ST Pole 8.5 mtr SP-23

Head load cartage of small material including loading & unloading upto 1.0 to 6.0 Km.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for errection of pole in all type of soil including proper dressing of sides and ramming of bottom icluding getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Errection of following single support pole in proper level and alignment alongwith fixing of all accessories like top channel & clamps as per RESPO construction manual.

ST Pole 8.5 mtr SP-23

Errection of following double support pole in proper level and alignment alongwith fixing of all accessories like top channel & clamps as per RESPO construction manual.

ST Pole 8.5 mtr SP-23

Grouting of pole in size 0.45x0.45x1/9 of the support in cc ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment , leveling as per RESPO construction manual.

Muffing of poles size 0.45 cm x 0.60 cm radious with cc 1:3:6 (1 cement : 3 coarse sand : 6 graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.

Fabrication of MS channel angle iron after cutting in required zize with drilling of holes upto good finish for top channel, breasing and special type bracket etc. as per RESPO shedule and local approved drawing.

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing, tightening and nozzelling of stay with pole and stay rod on required tension as per drawing / RESPO manual.

11 Kv Line

Grouting of stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment , leveling as per RESPO manual.

Earthing of support with MS earth rod of 2.5 mtr long by hammaring of MS rod to proper depth and connecting the earth electrode with the help of G.I wire as per construction manual.

Conversion S/disc into D/disc 11 Kv line.

Laying, spreading, stringing and sagging of 11 Kv line I 3 phase (3 phase 4 wire) of the follwing waire as phase wire with G.I earth wire complete including fixinf of all accessories in 03 nos. comductors in parallel with binding and jumpering as per profile and sagging chart.

ACSR Rabbit Conductor

Earth Wire GI 7/16 SWG

Guarding of line over (Telephone / Road ? LT line crossing as per drawing with 6/8 SWG G.I wire including fixing of guarding wire channel / angle as per RESPO manual 11 Kv.

11 Kv Line

Painting of poles with angle and channel and all steel part by one coat of red oxide primer and two coats of aluminium paint and two strip of fluorescent alternate red and white paint 30 cm wide upto 1.5 mtrs from ground level.

ST Pole 8.5 mtr SP-23

Route clearence by cutting tree branches / proning, lopping and chopping of trees for 11 Kv lin.

Providing and fixing of Danger Board and number plate complete by providing clamps of MS flat 50x6 mm and nuts & bolts, danger board of MS sheet 2 mm thick 11'x7' size (including cost of material).

C-TRANSFORMATION

Cartage of other material (other than poles) by vehicle from store centre Almora to nearest construction site store including loading & unloading at both ends.

Head load cartage of small material including loading & unloading upto 1.0 to 6.0 Km.

Laying and errection of LT PVC cable including crimping of lugs 1x70,120, 150 sqmm (Including all cost of material).

Mounting & fixing of TPMO on double pole structure including making of connections completer work.

Mounting & fixing of Fuse set on double pole structure including making of connections completer work.

Mounting & fixing of Lightning arrester set (03 nos.) on double pole structure including making all connections by G.I strip 35x6 mm to earth point complete work.

Chemical earthing of distribution transformer including digging of pit of size 2.5 mtr depth and make hole of size 150 mm. Placing of earthing elctrode (to be supplied by contractor as per drawing No.A) as drawing B. connecting the same with G.I strip of size 35x6 mm as per drawing C for a minimum length 6 m. treatment of soil with highly conductive substance as per is 30343 complete in all respect, result of earthing resistance to be recorded in M.B before and after installation of earthing. The earth resistance after eathing should be less than 1 Ohm.

D-DISTRIBUTION

Cartage of ST Pole from store centre Almora to construction site with loading, unloading at both points and proper stacking in average distance 160 Km.

ST Pole 8.0 mtr SP-10

ST Pole 8.5 mtr SP-21

Cartage of other material (other than poles) by vehicle from store centre Almora to nearest construction site store including loading & unloading at both ends.

Head load cartage of following Poles from road to construction site upto 1.0 to 6.0 Km.

ST Pole 8.0 mtr SP-10

ST Pole 8.5 mtr SP-21

Head load cartage of small material including loading & unloading upto 1.0 to 6.0 Km.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for errection of pole in all type of soil including proper dressing of sides and ramming of bottom icluding getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Errection of following single support pole in proper level and alignment alongwith fixing of all accessories.

ST Pole 8.0 mtr SP-10

ST Pole 8.5 mtr SP-21

Grouting of pole in size 0.45x0.45x1/9 of the support in cc ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment , leveling as per RESPO construction manual.

Muffing of poles size 0.45 cm x 0.60 cm radious with cc 1:3:6 (1 cement : 3 coarse sand : 6 graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing, tightening and nozzelling of stay with pole and stay rod on required tension as per drawing / RESPO manual.

LT Stay

Grouting of stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment , leveling as per RESPO manual.

Laying, spreading, stringing and sagging of LT line of the following wire as phase wire with G.I earth wire complete with binding and jumpering as per RESPO specification.

ACSR Weasel Conductor 1 Phase 2 Wire

ACSR Weasel Conductor 3 Phase 4 Wire

Route cleareance by cutting tree branches / proning, lopping and chopping of trees for LT line.

Painting of poles with angle and channel and all steel part by one coat of red oxide primer and two coats of aluminium paint and two strip of fluorescent alternate red and white paint 30 cm wide upto 1.5 mtrs from ground level.

ST Pole 8.0 mtr SP-10

ST Pole 8.5 mtr SP-21

Fixing of Bolted Type Spacer in LT line

LT Bolted type Spacer 4 Wire

LT Bolted type Spacer 3 Wire

GURUKRIPA ENGINEERS AND CONTRACTORS

G R ENTERPRISES