Construction of HDO Office Cum Store At Batalik by way of Electrification (Under Capex)

Sub Head-1

Internal Electrification

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in Existing surface/recessed medium class PVC conduit ,with modular switch,modular plate,suitable GI Box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. (Make Havells/Polycab/KEI

Group A

Group B

Wiring for circuit/sub mains wiring along with earth wire of the following size of FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required.(Make Havells/Polycab/KEI)

2x2.5 sq.mm +1x2.5 sq.mm earth wire.

2x4 sq.mm + 1x4 sq.mm earth wire.

2x 10 sq.mm + 1x6 sq.mm earth wire.

2x 16 sq.mm + 1x6sq.mm earth wire .

Sub Head-2

Supply, installation,Testing & commissioning of Internal lighting fixtures

Providing & Fixing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of ≥ 120 lm / watt, THD < 10 % ,p.f.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted.

LED 12 W surface panel of lumen more than 1100 Round Shape.

10W LED Surface Ceiling mounted

Piller light outdoor

50 LED Flood light with ip 65 protection

Sub Heads-3

Supply,installation of E Fans,C Fans,E Fans

P/F of exhaust fan shutter type of sweep 250mm in the existing opening, including making the hole to suit the above fan, making good the damage as required.(Make: Havells USHA/Bajaj)

S/F of 1200mm sweep 3 blades,energy efficient 5 star ceiling fan complete with assembling of blades,down rod,shackle insulator,canopy etc,including 2 modular stepped type modular fan rugulator. (Make: Havells/Polycab/Orient/Khaitan)

Sub Heads-4

Gi Box along with modular base & Cover plates

S/F following size/module, GI box along with modular base and cover plate for modular switches/sockets in recess etc. as required: (Make: Havells Crabtree/Legrand/Greatwhite/CONA/Gold medel)

1or 2 module (75mm x 75mm)

3 module (100mm x 75mm)

4 module (125mm x 75mm)

6 module (200mm x 75mm)

8 module (225mm x 75mm)

Sub Head-5

Modular Switches and Sockets

S/F following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. (Make: Havells Crabtree/Legrand/Greatwhite/CONA/Gold medel)

6 amp switch

16 amp switch.

3 pin, 6 amp socket outlet

6 pin, 16 amp socket outlet

Indicator lamp/Blank

Sub Head-6

MCCB & MCB Distribution Board

MCB Distribution Board: S/F Double door MCB distribution boards, 240V/415V, Sheet steel, Powder coated DB’s suitable for MCB’s fitted with Bus Bar, Neutral link, Earth Bar and Din bar of following no. of ways : (Make: Havells/C&S/L&T)

16 Way double door SP&N

12 Way double door SP&N

2 way single MCB Box

Sub Heads-7

Miniature Circuit Breaker/RCCB Residual Current Circuit Breaker/Double Pole Miniature Circuit Breaker

S/F of 5 Amps to 63 Amps, 240/415V, “B series, ISI Mark” miniature circuit breakers suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required: (Make: Havells/C&S/V Guard)

Single pole 6A, SP MCB

Single pole 16A, MCB

Mini MCB 4 Air Conditioner

Double pole 40A, DP MCB

Double pole 63A, DP MCB

100A ,4p changeover Switch

Sub Head-8

200A Busbar Chamber

Supply,carriage at site,installation testing and commissioning of following rating of BusBar Chamber (Wall mounted) in power coated sheet steel enclosure

SITC of 100A,4Way TPN Aluminum BusBar Chamber

Sub Head-9

Charcoal/Salted EARTHING

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Sub Head-10

Supply & Laying of Cable & End Termination

Supplying and laying following size and specification of XLPE insulated PVC sheathed armored cable with aluminum conductor for working voltage 1100 V grade as per IS: 7908, including thimble/lugs, double compression glands etc.of respective size. (Make: Havells/Polycab/KEI)

3.5C x 35 Sq.mm Armored Al. cable

Sub Head-11

Electrical Heavy PVC Conduit Pipe

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of MS fan box

Supplying and fixing of 10 x 10 x 10 cm of concealed box